REGA ELYS 2 Dual Magnet (MM) Cartridge

190.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: ELYS 2 Category:
Each one of our moving magnet cartridges are meticulously hand assembled to the highest standard by our highly trained technicians. The design and assembly procedure are focused on one simple goal, extracting as much music from your vinyl as possible. Each one uses a pair of parallel wound coils, which are then carefully assembled on […]

 

Read more

Each one of our moving magnet cartridges are meticulously hand assembled to the highest standard by our highly trained technicians. The design and assembly procedure are focused on one simple goal, extracting as much music from your vinyl as possible.

Each one uses a pair of parallel wound coils, which are then carefully assembled on custom jigs to create a working stereo generator. Each cartridge is then tested and checked over two days to ensure all of the strict parameters for each model are met before either packing or fitting to a Rega turntable.

The multi award winning, Rega moving magnet range offers unrivalled clarity, engaging stereo imaging and a natural dynamic performance putting you in touch with your vinyl collection like never before.

A multi award winning, hand built moving magnet cartridge with three point mounting system.

  • Output: 6.8 – 7.2mV
  • Stylus: Elliptical
  • Fixing: Rega three point fixing
  • Coils: High Spec parallel wound coils
  • Colour: Blue
  • Tracking Pressure 1.75g
Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “REGA ELYS 2 Dual Magnet (MM) Cartridge”

Your email address will not be published. Required fields are marked *

Quick Comparison

REGA ELYS 2 Dual Magnet (MM) Cartridge removeORTOFON 2M Blue CARTRIDGE removeORTOFON OM Digitrack CARTRIDGE removeORTOFON 2M Bronze Cartridge removeORTOFON CONCORDE DIGITRACK CARTRIDGE removeORTOFON MC 1 Turbo CARTRIDGE remove
NameREGA ELYS 2 Dual Magnet (MM) Cartridge removeORTOFON 2M Blue CARTRIDGE removeORTOFON OM Digitrack CARTRIDGE removeORTOFON 2M Bronze Cartridge removeORTOFON CONCORDE DIGITRACK CARTRIDGE removeORTOFON MC 1 Turbo CARTRIDGE remove
Image
SKUELYS 22MBLUeOMDigitrack2MBRONZECONCORDEDIGITRACKMC1Turbo
Rating
Price190.00 incl. GR VAT 208.25 incl. GR VAT67.00 incl. GR VAT345.00 incl. GR VAT116.98 incl. GR VAT199.00 incl. GR VAT
Stock

In stock

Only 1 left in stock (can be backordered)

In stock

In stock

In stock

In stock

AvailabilityIn stockOnly 1 left in stock (can be backordered)In stockIn stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Each one of our moving magnet cartridges are meticulously hand assembled to the highest standard by our highly trained technicians. The design and assembly procedure are focused on one simple goal, extracting as much music from your vinyl as possible.

Each one uses a pair of parallel wound coils, which are then carefully assembled on custom jigs to create a working stereo generator. Each cartridge is then tested and checked over two days to ensure all of the strict parameters for each model are met before either packing or fitting to a Rega turntable.

The multi award winning, Rega moving magnet range offers unrivalled clarity, engaging stereo imaging and a natural dynamic performance putting you in touch with your vinyl collection like never before.

A multi award winning, hand built moving magnet cartridge with three point mounting system.

  • Output: 6.8 - 7.2mV
  • Stylus: Elliptical
  • Fixing: Rega three point fixing
  • Coils: High Spec parallel wound coils
  • Colour: Blue
  • Tracking Pressure 1.75g
The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series.  Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality. 2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today. The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet. The 2M series of cartridges feature Ortofonʼs trademark split pole pins, an invention which enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge.  Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series. The 2M Blue uses an improved engine, which provides an increased output of 5.5mV.  
TECHNICAL DATA
Output voltage at 1000 Hz, 5cm/sec. 5,5 mV
Channel balance at 1 kHz 1,5 dB
Channel separation at 1 kHz 25 dB
Channel separation at 15 kHz 15 dB
Frequency range at - 3dB 20-25.000 Hz
Frequency response 20-20.000 + 2 / - 1 dB
Tracking ability at 315Hz at recommended tracking force 80 µm
Compliance, dynamic, lateral 20 µm/mN
Stylus type Nude Elliptical
Stylus tip radius r/R 8/18 µm
Tracking force range 1,6-2,0g (16-20 mN)
Tracking force, recommended 1,8 g (18 mN)
Tracking angle 20°
Internal impedance, DC resistance 1,3 kOhm
Internal inductance 700 mH
Recommended load resistance 47 kOhm
Recommended load capacitance 150-300 pF
Cartridge colour, body/stylus Black/Blue
Cartridge weight  7,2 g
Replacement stylus unit 2M Blue
 

The newest cartridge from Ortofon, the DigiTrack responds to the next generation of turntable DJs who make extensive use of timecoded vinyl applications, such as Serato (TM) and FinalScratch (TM).  With DigiTrack's low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well.   DigiTrack also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.

Output voltage at 1000Hz, 5cm/sec.

8 mV

Channel balance at 1kHz

1,5 dB

Channel separation at 1kHz

22 dB

Channel separation at 15 kHz

15 dB

Frequency range at -3dB

20-20.000 Hz

Frequency response

20-20.000 Hz +/- 1,5 dB

Tracking ability at 315 Hz at recommmende tracking force

90 μm

Compliance, dynamic lateral

12 μm/m N

Stylus type

Spherical

Stylus tip radius

-

Tracking force range

2,0-4,0 g (20-40 mN)

Tracking force recommended

3,0 g (30 mN)

Tracking angle

-

Internal impedance, DC resistance

-

Internal inductance

-

Recommended load resistance

-

Recommended load capacitance

-

Cartridge weight

5 g

Replacement stylus unit

Digitrak

 

2M Bronze - The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series.  Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality. 

2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.

The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet. 

The 2M Bronze features a nude Fine Line diamond stylus, which is particularly suited for demanding applications.  The slim profile of the Fine Line stylus will track even the highest frequency information, making it a must for discerning listeners.  Additionally, its larger footprint ensures reduced distortion and record wear.

The cartridge body used for the 2M Bronze is manufactured from a newly-developed Noryl plastic/glass combination, a revolutionary material which ensures high rigidity while eliminating unwanted resonances.  The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire. 


TECHNICAL DATA
Output voltage at 1000 Hz, 5cm/sec. 5 mV
Channel balance at 1 kHz 1 dB
Channel separation at 1 kHz 26 dB
Channel separation at 15 kHz 15 dB
Frequency range at - 3dB 20-29.000 Hz
Frequency response 20-20.000 + 2 / - 0 dB
Tracking ability at 315Hz at recommended tracking force 80 µm
Compliance, dynamic, lateral 22 µm/mN
Stylus type Nude Fine Line
Stylus tip radius r/R 8/40 µm
Tracking force range 1,4-1,7g (14-17 mN)
Tracking force, recommended 1,5 g (15 mN)
Tracking angle 20°
Internal impedance, DC resistance 1,2 kOhm
Internal inductance 630 mH
Recommended load resistance 47 kOhm
Recommended load capacitance 150-300 pF
Cartridge colour, body/stylus Black/Bronze
Cartridge weight  7,2 g
Replacement stylus unit 2M Bronze

The newest cartridge from Ortofon, the DigiTrack responds to the next generation of turntable DJs who make extensive use of timecoded vinyl applications, such as Serato (TM) and FinalScratch (TM).  With DigiTrack's low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well.   DigiTrack also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.

 

Output voltage at 1000Hz, 5cm/sec.

8 mV

Channel balance at 1kHz

1,5 dB

Channel separation at 1kHz

22 dB

Channel separation at 15 kHz

15 dB

Frequency range at -3dB

20-20.000 Hz

Frequency response

20-18.000 Hz -3dB/-2 dB

Tracking ability at 315 Hz at recommmende tracking force

90 μm

Compliance, dynamic lateral

12 μm/m N

Stylus type

Spherical

Stylus tip radius

--

Tracking force range

2,0-4,0 g (20-40 mN)

Tracking force recommended

3,0 g (30 mN)

Tracking angle

-

Internal impedance, DC resistance

-

Internal inductance

-

Recommended load resistance

-

Recommended load capacitance

-

Cartridge weight

18,5 g

Replacement stylus unit

Digitrak
The MC 1 Turbo is an excellent entry into the world of high output moving coil (MC) cartridges, with an elliptical stylus profile.  The MC 1 Turbo has a 3.3mV output, which makes it perfect for use with inbuilt phono preamps – specifically ones designed for moving magnet (MM) cartridges.  The MC 1 Turbo provides a taste of the linearity and precision of moving coils, but without the need for additional high gain preamps or transformers.
Technical data
Output voltage at 1000 Hz, 5cm/sec. 3,3 mV
Channel balance at 1 kHz
Channel separation at 1 kHz > 22 dB
Channel separation at 15 kHz > 15 dB
Frequency range at - 3dB 20-25.000 Hz
Frequency response FIM distortion at recommended 20-20.000 Hz + 4 / - 1 dB
Tracking ability at 315Hz at recommended tracking force *) > 65 µm
Compliance, dynamic, lateral 13 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Tracking force range 1,8-2,2 g (18-22 mN)
Tracking force, recommended 2 g (20 mN)
Tracking angle 20°
Internal impedance, DC resistance 100 Ohm
Recommended load impedance 47 kOhm /
Cartridge body material Noryl
Cartridge colour Black
Cartridge weight 4,1 g
 
Weight0.10 kg0.70 kg0.50 kg0.70 kg0.18 kg0.40 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 0.70 kg
Weight 0.50 kg
Weight 0.70 kg
Weight 0.18 kg
Weight 0.40 kg