Content |
Each one of our moving magnet cartridges are meticulously hand assembled to the highest standard by our highly trained technicians. The design and assembly procedure are focused on one simple goal, extracting as much music from your vinyl as possible.
Each one uses a pair of parallel wound coils, which are then carefully assembled on custom jigs to create a working stereo generator. Each cartridge is then tested and checked over two days to ensure all of the strict parameters for each model are met before either packing or fitting to a Rega turntable.
The multi award winning, Rega moving magnet range offers unrivalled clarity, engaging stereo imaging and a natural dynamic performance putting you in touch with your vinyl collection like never before.
A multi award winning, hand built moving magnet cartridge with three point mounting system.
- Output: 6.8 - 7.2mV
- Stylus: Elliptical
- Fixing: Rega three point fixing
- Coils: High Spec parallel wound coils
- Colour: Blue
- Tracking Pressure 1.75g
| THE CARL COX SIGNATURE MODEL, OPTIMIZED FOR DANCE MUSIC DJ PERFORMANCE.
* Frequency response: 20 to 22,000Hz
* Output: 6mV
* Channel separation nominal: 32dB
* DC resistance: 430 ohms/ch
* Inductance: 400mH/ch
* Weight: 18.0g
* Channel balance: within 1.5dB
* Tracking force: 3–6g
* Recommended load: 47K ohms 200pf
* Stylus tip: fine circular diamond
* Application: club and mobile DJs, high output | The MC 1 Turbo is an excellent entry into the world of high output moving coil (MC) cartridges, with an elliptical stylus profile. The MC 1 Turbo has a 3.3mV output, which makes it perfect for use with inbuilt phono preamps – specifically ones designed for moving magnet (MM) cartridges. The MC 1 Turbo provides a taste of the linearity and precision of moving coils, but without the need for additional high gain preamps or transformers.
Technical data |
|
Output voltage at 1000 Hz, 5cm/sec. |
3,3 mV |
Channel balance at 1 kHz |
|
Channel separation at 1 kHz |
> 22 dB |
Channel separation at 15 kHz |
> 15 dB |
Frequency range at - 3dB |
20-25.000 Hz |
Frequency response FIM distortion at recommended |
20-20.000 Hz + 4 / - 1 dB |
Tracking ability at 315Hz at recommended tracking force *) |
> 65 µm |
Compliance, dynamic, lateral |
13 µm/mN |
Stylus type |
Elliptical |
Stylus tip radius |
r/R 8/18 µm |
Tracking force range |
1,8-2,2 g (18-22 mN) |
Tracking force, recommended |
2 g (20 mN) |
Tracking angle |
20° |
Internal impedance, DC resistance |
100 Ohm |
Recommended load impedance |
47 kOhm / |
Cartridge body material |
Noryl |
Cartridge colour |
Black |
Cartridge weight |
4,1 g |
|
NUMARK'S ALL–AROUND CHAMP, FOR DURABILITY AND RELIABILITY
* Frequency response: 20 to 22,000Hz
* Output: 6mV
* Channel separation nominal: 28dB
* DC resistance: 430 ohms/ch
* Inductance: 400mH/ch
* Weight: 18.0g
* Channel balance: within 1.5dB
* Tracking force: 3–6g
* Recommended load: 47K ohms 200pf
* Stylus tip: fine circular diamond
* Application: high versatility and skip resistance |
Features
• 1 System
• 1 Replacement Stylus
• Small brush
• Inside a velvet-case
Technical Data
Output voltage at 1000 Hz: 5cm/sec. 7,5 mV
Frequency response: 20-15.000 Hz +3 / -2 dB
Stylus type: Spherical
Tracking force range: 3,0-5,0 g (30-50 mN)
Tracking force, recommended: 4,0 g (40 mN)
Cartridge weight: 5 g |
Type: MC-type
Playback frequency range: 15-50,000Hz
Output voltage: 0.3mV (1kHz and 3.54cm/sec.)
Channel separation: 30dB (1kHz)
Output balance: 0.5dB (1kHz)
Stylus pressure: 1.8-2.2g (2.0g standard)
Coil impedance: 10O (1kHz)
DC resistance: 10O
Load resistance: More than 100O (when head amp connected)
Coil inductance: 22µH (1kHz)
Static compliance: 40×10-6cm/dyne
Dynamic compliance: 10×10-6cm/dyne (100Hz)
Stylus needle shape: Oval (0.3×0.7mil)
Cantilever: Duralumin tapered pipe
Vertical tracking angle: 23°
Dimensions: H16×W16.6×D26.5mm
Weight: 6.9g
Accessories: Non-magnetic screwdriver × 1, Washer × 2, Protector × 1, Cartridge installation screws 13 mm × 2 and 19 mm × 2, Nut × 2, Brush × 1, PCOCC lead set × 1
|
Reviews
There are no reviews yet.