Content | Each one of our moving magnet cartridges are meticulously hand assembled to the highest standard by our highly trained technicians. The design and assembly procedure are focused on one simple goal, extracting as much music from your vinyl as possible.
Each one uses a pair of parallel wound coils which are then carefully assembled on custom jigs to create a working stereo generator. Each cartridge is then tested and checked over two days to ensure all of the strict parameters for each model are met before either packing or fitting to a Rega turntable.
The multi award winning, Rega moving magnet range offers unrivalled clarity, engaging stereo imaging and a natural dynamic performance, putting you in touch with your vinyl collection like never before.
Hand built moving magnet cartridge with three point mounting system and Vital profile diamond stylus with zero tolerance channel balance.
- Output: 6.8 - 7.2mV
- Stylus: Vital. Complex fine line micro-ground from a rectangular diamond billet.
- Fixing: Rega three point fixing
- Coils: High Spec parallel wound coils
- Colour: Yellow
- Tracking Pressure 1.75g
|
The newest cartridge from Ortofon, the DigiTrack responds to the next generation of turntable DJs who make extensive use of timecoded vinyl applications, such as Serato (TM) and FinalScratch (TM). With DigiTrack's low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well. DigiTrack also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.
Output voltage at 1000Hz, 5cm/sec.
|
8 mV
|
Channel balance at 1kHz
|
1,5 dB
|
Channel separation at 1kHz
|
22 dB
|
Channel separation at 15 kHz
|
15 dB
|
Frequency range at -3dB
|
20-20.000 Hz
|
Frequency response
|
20-18.000 Hz -3dB/-2 dB
|
Tracking ability at 315 Hz at recommmende tracking force
|
90 μm
|
Compliance, dynamic lateral
|
12 μm/m N
|
Stylus type
|
Spherical
|
Stylus tip radius
|
--
|
Tracking force range
|
2,0-4,0 g (20-40 mN)
|
Tracking force recommended
|
3,0 g (30 mN)
|
Tracking angle
|
-
|
Internal impedance, DC resistance
|
-
|
Internal inductance
|
-
|
Recommended load resistance
|
-
|
Recommended load capacitance
| - |
Cartridge weight
| 18,5 g
|
Replacement stylus unit
| Digitrak |
|
For DJs that require increased tracking ability, the Scratch is up to the task. Featuring a reinforced rubber suspension, DJs need not worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.
Output voltage at 1000Hz, 5cm/sec.
|
7 mV
|
Channel balance at 1kHz
|
1,5 dB
|
Channel separation at 1kHz
|
25 dB
|
Channel separation at 15 kHz
|
15 dB
|
Frequency range at -3dB
|
20-20.000 Hz
|
Frequency response
|
20-15.000 Hz 3dB/-2dB
|
Tracking ability at 315 Hz at recommmende tracking force
|
80 μm
|
Compliance, dynamic lateral
|
6 μm/m N
|
Stylus type
|
Spherical
|
Stylus tip radius
|
R 18 μm
|
Tracking force range
|
3,0-5,0 g (30-50 mN)
|
Tracking force recommended
|
4,0 g (40 mN)
|
Tracking angle
|
20°
|
Internal impedance, DC resistance
|
750 Ohm
|
Internal inductance
|
450 mH
|
Recommended load resistance
|
47 kOhm
|
Recommended load capacitance
|
200-600 pF
|
Cartridge weight
|
18,5 g
|
Replacement stylus unit
| Scratch |
|
The newest cartridge from Ortofon, the DigiTrack responds to the next generation of turntable DJs who make extensive use of timecoded vinyl applications, such as Serato (TM) and FinalScratch (TM). With DigiTrack's low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well. DigiTrack also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.
Output voltage at 1000Hz, 5cm/sec.
|
8 mV
|
Channel balance at 1kHz
|
1,5 dB
|
Channel separation at 1kHz
|
22 dB
|
Channel separation at 15 kHz
|
15 dB
|
Frequency range at -3dB
|
20-20.000 Hz
|
Frequency response
|
20-20.000 Hz +/- 1,5 dB
|
Tracking ability at 315 Hz at recommmende tracking force
|
90 μm
|
Compliance, dynamic lateral
|
12 μm/m N
|
Stylus type
|
Spherical
|
Stylus tip radius
|
-
|
Tracking force range
|
2,0-4,0 g (20-40 mN)
|
Tracking force recommended
|
3,0 g (30 mN)
|
Tracking angle
| -
|
Internal impedance, DC resistance
|
-
|
Internal inductance
|
-
|
Recommended load resistance
|
-
|
Recommended load capacitance
|
-
|
Cartridge weight
|
5 g
|
Replacement stylus unit
| Digitrak |
|
For DJs that require increased tracking ability, the Scratch is up to the task. Featuring a reinforeced rubber suspension, DJs don't need to worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.
This Ortofon Concorde Set contains;
- 2x Ortofon Concorde Scratch Element
- Ortofon Needle Brush
- All parts come in a special Ortofon box casing
Features:
Output Voltage at 1000Hz, 5cm/sec. : 7mV
Channel Balance at 1 Khz : 1,5dB
Channel Seperation at 1 Khz : 25dB
Channel Seperation at 15 Khz : 15dB
Frequency Range at 3db : 20-20.000Hz
Stylus Type : Spherical
Internal Impedance : 750 Ohm
Tracking Force recommended : 4,0G(40mN)
Cardridge Weight : 18,5 gram
Replacement Stylus Unit : Scratch |
|
Features
• 1 System
• 1 Replacement Stylus
• Small brush
• Inside a velvet-case
Technical Data
Output voltage at 1000 Hz: 5cm/sec. 7,5 mV
Frequency response: 20-15.000 Hz +3 / -2 dB
Stylus type: Spherical
Tracking force range: 3,0-5,0 g (30-50 mN)
Tracking force, recommended: 4,0 g (40 mN)
Cartridge weight: 5 g |
Reviews
There are no reviews yet.