Content | The Rega Fono Mini A2D is a high quality phono pre-amplifier for use with any moving magnet cartridge. The addition of USB interface allows you to easily transfer vinyl to your PC. The Fono Mini A2D is designed to amplify the signal from a moving magnet cartridge to a suitable level for all line level inputs of an audio amplifier. The new Fono Mini A2D benefits from an extruded aluminium case and very user friendly front and back panels that make this phono pre-amplifier a very easy product to use.
The Fono Mini A2D amplifier offers exceptional performance and incredible value for money and promises to be a valuable addition to any hi-fi set up.
To transfer vinyl to your PC, you will need to install a digital audio editor. Such software is widely available as a free download (such as Audacity), from the internet. This is a simple interface which allows monitoring of volume and balance whilst transferring your audio to your PC hard drive.
Audio editing software includes a level meter which indicates the output level achieved when playing a piece of vinyl. You should adjust the output as necessary via the ‘Level’ control located on the front panel. Always take special note of record levels to ensure optimum recording quality.
This is a cost effective version of the Fono MM and based on the phono amplifier as used in the Brio-R amplifier.
Simply switch on, sit back and enjoy!
- Input sensitivity: 5mV for 500mV output
- Input loading: 47k +100pF
- Maximum input level: 70mV @ 1kHz
- Output Impedance: 100 Ohms
- Signal to noise ratio: 78dBA ref 5mV
- Power requirements: 24VAC 85mA
- Input for full scale digital output: 7.5mV
- Dimensions W 102mm x D 125mm x H 30mm
|
- Input impedance, MM 47kohms/120pF
- Input impedance, MC 100ohms/120pF
- Gain, MM 40dB
- Output voltage typically 300mV/1kHz at 3mV/1kHz (MM input)
- Gain, MC 60dB
- Output voltage typically 300mV/1kHz at 0,3mV/1kHz (MC input)
- Max. output 9,5V (1kHz)
- Noise floor, MM 86dB (94dB - A weighted)
- Noise floor, MC 68dB (75dB - A weighted)
- THD, MM 0,01%
- THD, MC 0,05%
- RIAA-equalisation curve accuracy 20Hz - 20kHz / max. 0,5dB
- A/D converter -Bit Delta Sigma
- USB output digital serial data protocol USB 1.1
- Operating systems Windows®, MacOS® and Linux®
- THD: 0.005% - Noise floor: 96dB - Dynamic range: 93dB - Outboard power supply: 16V/200mA AC, suitable for your country's mains supply
- Power consumption: 16V/100mA AC -Dimension W x H x D: 103 x 38 x 115mm - Weight: 570g without power supply
Manual/Εγχειρίδιο
| Phono preamplifier with A/D converter and USB output
Record Box E: Pure vinyl listening pleasure plus recording functionality!
Record Box E is an high-quality phono preamplifier, that offers the possibility to convert your valuable vinyls into computer music data. Record Box E accepts both MM & MC cartridges and gives audiophile music experience at an entry level price. The integrated A/D converter operates with Windows and MAC operating systems and connects via USB to your computer. Therefore your valuable vinyl collection can be digitised, especially for use in portable music players. Advanced circuitry and SMD construction keep noise and distortion at a surprisingly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Record Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Record Box E can be connected easily to a line-input (AUX etc) of your amplifier.
- Amplification and RIAA equalisation for MM & MC
- Design principle inspired by Dr. Sykora
- Digitalisation of vinyl for recording direct to USB with suitable recording programs
- Automatic recognition, no additional drivers needed
- Runs on Windows®, Mac OS® & Linux operating systems
- SMD circuitry with special low noise components
- Internal metal shielding
- Small size allows installation close to record player
- Gold plated RCA connection sockets
- Outboard power supply included
- Black or White casing
Input capacitance/input impedance |
MC: 100 ohms/120 pF (low output MC) MM: 47kohms/120 pF (MM or high output MC) |
Gain, MM / MC |
40 dB / 60 dB |
Output voltage typically |
300 mV/1 kHz bei 3 mV/1 kHz (MM) oder 0.3 mV/1 kHz (MC) |
Max. output |
9,5 V (1 kHz) |
Noise floor MM / MC |
94 dB (A weighted) / 75 dB (A weighted) |
THD MM / MC |
<0,01% / <0,05% |
RIAA-equalisation curve accuracy |
20 Hz - 20 kHz / max. 0.5 dB |
A/D converter |
Burr Brown PCM2904 16-Bit Delta Sigma |
Sampling rates |
32, 44,1 and 48 kHz |
USB output |
5 pin Mini b Buchse |
USB signal |
digital serial data protocol USB 1.1 |
Operating systems |
Windows XP®, Windows Vista®, Windows 7®, Windows 8®, Mac OS, Linux |
Input / Line output |
1 pair RCA/Cinch sockets each |
Outboard power supply |
18 V / 500 mA DC, suitable for your country's mains supply |
Power consumption |
100 mA DC |
Dimensions W x H x D (D with sockets) |
120 x 32 x 100 (115) mm |
Weight |
250g without power supply |
|
Backed by the combined technological prowess of multiple HARMAN brands, the JBL Commercial Series Mixers (CSM) deliver unsurpassed quality in commercial sound. Easily configured for a range of applications, such as background music, security, and paging, CSM units are designed for everything from schools and hospitals to restaurants and fitness facilities. They feature RJ45 connectors for use with JBLCSR-V in-wall volume controls, and a universal power supply that accepts AC voltages from 100 to 240 VAC, 50/60 Hz. Plus, theyʼre built using HARMANʼs GreenEdge clean standards to offer numerous energy-efficient benefits, including a lighter weight, space-saving design, and conforming to RoHS standards. 4 or 8 inputs with 1 or 2 channel outputs Fanless, space-saving 1U design Configurable output routing (2 channel models only) Independent base/treble controls Euro-block type mic/line input and output connectors, and unbalanced RCA inputs for consumer connection Supports JBL CSR-V wall controller via Ethernet cable Priority muting, VOX ducking, and phantom power for all models |
Backed by the combined technological prowess of multiple HARMAN brands, the JBL Commercial Series Mixers (CSM) deliver unsurpassed quality in commercial sound. Easily configured for a range of applications, such as background music, security, and paging, CSM units are designed for everything from schools and hospitals to restaurants and fitness facilities. They feature RJ45 connectors for use with JBLCSR-V in-wall volume controls, and a universal power supply that accepts AC voltages from 100 to 240 VAC, 50/60 Hz. Plus, theyʼre built using HARMANʼs GreenEdge clean standards to offer numerous energy-efficient benefits, including a lighter weight, space-saving design, and conforming to RoHS standards. 4 or 8 inputs with 1 or 2 channel outputs Fanless, space-saving 1U design Independent base/treble controls Euro-block type mic/line input and output connectors, and unbalanced RCA inputs for consumer connection Sleek industrial look with illuminated rings making them easy to see and use Configurable output routing (2 channel models only) Supports JBL CSR-V wall controller via Ethernet cable Priority muting, VOX ducking, and phantom power for all models |
The Fono MC is an exceptionally high quality MC phono stage designed to maximise the potential of any MC cartridge. Although specifically to compliment the latest Rega range of moving coils you will find full adjustability for loading is available via dip switches conveniently placed on the rear panel with two different gain settings located on the back panel making the Fono MC compatible with most low output MC cartridges.
The Fono MC has been designed to be effective, easy to use, and above all, to reproduce music. The Fono MC uses the Linear Systems low noise LSK389 FET in an all discrete input stage where low noise and linearity are vitally important to get the best from an MC cartridge. Because of the high input impedance of FET, the loading effects of the amplifier circuit are minuscule and do not affect the performance of the cartridge.
A MUSE operational amplifier is used in the RIAA equalization amplifier. Polypropylene capacitors have been used in the signal path and in the RIAA equalization circuits. There is selectable input loading for both resistance and capacitance along with two different gain settings located on the back panel making the Fono MC compatible with most low output MC cartridges.
The aesthetic design of the Fono MC was as important as the quality of its electrical capabilities, so it benefits from the same aluminium case as the Rega TTPSU and Fono MM amplifier, giving it a design which offers a familiar feel and moreover brings it in line with its illustrious bigger brothers. The new Fono MC circuit resulted from the design work carried out on the Aria phono amplifier.
The Fono disk stage is designed to amplify the signal from a moving coil cartridge to a level which can feed into a 200mV line level input on a standard hi-fi amplifier.
Specifications
Output impedance = 200Ω Recommended minimum output load resistance = 5K Frequency response (50KΩ output load) = 13Hz (-3dB) to 100KHz (-0.3dB) RIAA accuracy (50KΩ output load) = Better than +/-0.2dB 100Hz to 100KHz Power requirements = 24V AC at 150mA maximum. Only to be used with Rega PS1.
Input sensitivity (for 200mV output) 4 off = 133uV 4 on = 67uV
Input loading resistance 1 and 2 off = 400Ω 1 on = 100Ω 2 on = 150Ω 1 and 2 on = 70Ω
Input loading capacitance 3 off = 1000pF 3 on = 4300pF Gain (at 1KHz) 4 off = 63.5dB 4 on = 69.5dB
Maximum input level (at 1KHz) 4 off = 6.7mV 4 on = 3.4mV
Load settings for adjustable MC stages
Impedance -100ohm Capacitance - 1000pF Gain setting - High (\'On\' position for Rega phono stages)
Fono MC dip switches settings (factory set at Rega for Rega MC models). |
Reviews
There are no reviews yet.