REGA Fono Mini A2D MM phono stage Preamplifier

353.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: Fono Mini A2D Category:
The Rega Fono Mini A2D is a high quality phono pre-amplifier for use with any moving magnet cartridge. The addition of USB interface allows you to easily transfer vinyl to your PC. The Fono Mini A2D is designed to amplify the signal from a moving magnet cartridge to a suitable level for all line level […]

 

Read more

The Rega Fono Mini A2D is a high quality phono pre-amplifier for use with any moving magnet cartridge. The addition of USB interface allows you to easily transfer vinyl to your PC. The Fono Mini A2D is designed to amplify the signal from a moving magnet cartridge to a suitable level for all line level inputs of an audio amplifier. The new Fono Mini A2D benefits from an extruded aluminium case and very user friendly front and back panels that make this phono pre-amplifier a very easy product to use.

The Fono Mini A2D amplifier offers exceptional performance and incredible value for money and promises to be a valuable addition to any hi-fi set up.

To transfer vinyl to your PC, you will need to install a digital audio editor. Such software is widely available as a free download (such as Audacity), from the internet. This is a simple interface which allows monitoring of volume and balance whilst transferring your audio to your PC hard drive.

Audio editing software includes a level meter which indicates the output level achieved when playing a piece of vinyl. You should adjust the output as necessary via the ‘Level’ control located on the front panel. Always take special note of record levels to ensure optimum recording quality.

This is a cost effective version of the Fono MM and based on the phono amplifier as used in the Brio-R amplifier.

Simply switch on, sit back and enjoy!

  • Input sensitivity: 5mV for 500mV output
  • Input loading: 47k +100pF
  • Maximum input level: 70mV @ 1kHz
  • Output Impedance: 100 Ohms
  • Signal to noise ratio: 78dBA ref 5mV
  • Power requirements: 24VAC 85mA
  • Input for full scale digital output: 7.5mV
  • Dimensions  W 102mm x D 125mm x H 30mm
Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “REGA Fono Mini A2D MM phono stage Preamplifier”

Your email address will not be published. Required fields are marked *

Quick Comparison

REGA Fono Mini A2D MM phono stage Preamplifier removePro-Ject Phono Box DS Phono preamplifier Linear RIAA equalisation removeTHORENS MM-008 ADC phono preamplifier removeNorth Star PHONO STAGE MM/MC HIGH LOW PRE AMPLIFIER SILVER removeBIAMP PM-7400 MKII Pre-Amplifier Stereo removeN-AUDIO PP400 Phono-RIAA Amplifier remove
NameREGA Fono Mini A2D MM phono stage Preamplifier removePro-Ject Phono Box DS Phono preamplifier Linear RIAA equalisation removeTHORENS MM-008 ADC phono preamplifier removeNorth Star PHONO STAGE MM/MC HIGH LOW PRE AMPLIFIER SILVER removeBIAMP PM-7400 MKII Pre-Amplifier Stereo removeN-AUDIO PP400 Phono-RIAA Amplifier remove
Image
SKUFono Mini A2DPhono Box DSMM 008 ADCPHONO STAGE SH06AP00002N-AUDIO PP400
Rating
Price 353.00 incl. GR VAT281.26 incl. GR VAT398.99 incl. GR VAT 1,390.71 incl. GR VAT 400.00 incl. GR VAT 31.82 incl. GR VAT
Stock

In stock

In stock

In stock

Available on backorder

In stock

In stock

AvailabilityIn stockIn stockIn stockAvailable on backorderIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe Rega Fono Mini A2D is a high quality phono pre-amplifier for use with any moving magnet cartridge. The addition of USB interface allows you to easily transfer vinyl to your PC. The Fono Mini A2D is designed to amplify the signal from a moving magnet cartridge to a suitable level for all line level inputs of an audio amplifier. The new Fono Mini A2D benefits from an extruded aluminium case and very user friendly front and back panels that make this phono pre-amplifier a very easy product to use. The Fono Mini A2D amplifier offers exceptional performance and incredible value for money and promises to be a valuable addition to any hi-fi set up. To transfer vinyl to your PC, you will need to install a digital audio editor. Such software is widely available as a free download (such as Audacity), from the internet. This is a simple interface which allows monitoring of volume and balance whilst transferring your audio to your PC hard drive. Audio editing software includes a level meter which indicates the output level achieved when playing a piece of vinyl. You should adjust the output as necessary via the ‘Level’ control located on the front panel. Always take special note of record levels to ensure optimum recording quality. This is a cost effective version of the Fono MM and based on the phono amplifier as used in the Brio-R amplifier. Simply switch on, sit back and enjoy!
  • Input sensitivity: 5mV for 500mV output
  • Input loading: 47k +100pF
  • Maximum input level: 70mV @ 1kHz
  • Output Impedance: 100 Ohms
  • Signal to noise ratio: 78dBA ref 5mV
  • Power requirements: 24VAC 85mA
  • Input for full scale digital output: 7.5mV
  • Dimensions  W 102mm x D 125mm x H 30mm
  • Technical data : Pro-Ject Phono Box DS+
  • Input impedance : 10 / 100 / 1000ohms or 47kohms
  • Load capacity switchable : 47pF 147pF, 267pF, 367pF (only relevant for MM @ 47kohms)
  • Gain : MM or high output MC: 40, 45 dB low output MC: 60, 65 dB
  • Signal to noise ratio : 90dB (A weighted @ 40dB input gain)
  • THD :
  • RIAA accuracy : within 0,3dB/20Hz - 20kHz
  • Subsonic : 20Hz / - 12dB
  • Input & Output : RCA
  • Power supply : 15V/500mA DC; 220 - 240V, 50Hz
  • Power consumption : 200mA DC
  • dimensions W x H x D (D with sockets) : 103 x 72 x 144 (156)mm
  • weight : 1025g without power supply

 

Manual/Εγχειρίδιο

WITH INTEGRATED ANALOGUE-TO-DIGITAL CONVERTER

Both Microsoft® Windows® and Apple® Mac OS® come with very simple audio recording software pre-installed. However, to take full advantage of the high-resolution recording facilities offered by the MM 008 ADC, we recommend recording software that can record at 24 bits/96 kHz and save lossless high-resolution audio files such as FLAC or Apple® Lossless.

ADC SOFTWARE

Thorens turntables can be considered state-of-the-art in hi-fi technology as they would extract even the most minute details from your precious vinyl records. The signals generated by the pickup cartridges are however very small and therefore must be amplified to a much higher level. Regrettably, most of today’s amplifiers are no longer equipped with a dedicated phono stage. This unfortunate situation was a good reason for Thorens to develop the TEP 302, a complete phono preamplifier including RIAA equalization, which was to complement the outstanding playback performance of our turntables.

The TEP 302 is a pure-bred Class-A amplifier which employs selected, very special low-noise operational amplifiers throughout. The circuitry has been optimized "by ear” after several extended listening sessions. Of course, the TEP 302 also features a 15-Hz subsonic filter in order to protect the woofers from dangerous excursions when a warped record is played. More details, more dynamics.

  • Mode: MM/MC (switchable)
  • Gain at 1 kHz: 40 dB (MM)/60 dB (MC)
  • Input impedance (MM): 47 kΩ + 220 pF fixed
  • Input impedance (MC): 47 kΩ + 1 nF (modifiable with external load plugs)
  • Frequency response (flat): 20 Hz - 20 kHz ±0.3 dB
  • Frequency response (-3 dB): 10 Hz - 50 kHz
  • RIAA curve accuracy: ±0.3 dB
  • THD+N: 72 dB (MC)
  • Crosstalk: ≧40 dB
  • Input sensitivity (MM): 3.29 mVrms for -10 dBV output (316 mVrms)
  • Input sensitivity (MC): 0.325 mVrms for -10 dBV output (316 mVrms)
  • Max. output voltage: 482 mVrms at 5 mVrms input (1 kHz)
  • Output impedance: 47 Ω
  • Input connections: 3 pairs of RCA sockets (left/right)
  • Output connections: 1 pair of RCA sockets (left/right)
  • Power supply: 24 V DC
  • Power consumption: 3.5 W/15 mA
  • Weight: 511 g (not including power supply)
  • Dimensions (W x H x D): 150 x 50 x 117 mm
  • A/D converter: Tenor TE7022L 24Bit Delta Sigma
  • Sampling rates: 8,16, 32, 44.1, 48, 96 kHz
  • USB output: USB 2.0, fully backward-compatible with USB 1.1
  • Operating systems: Windows® 8, Windows® 7, Vista, XP, Mac OS®

SILVER
 
Bandwidth 5Hz to 90kHz, -3dB Maximum output
voltage 8.5Vrms (47 kOhm load)
Overall gain 40dB-60dB @ 1kHz selectable with
dip- switch.
Input Impedance 29 Ohm - 100 kOhm selectable
with dip-switch.Selectable input Capacitance.
Input Unbalanced 1 pair x channel (RCA)WBT
Output Unbalanced(RCA)WBT - MM,
high output
MC, low output MC.
Handmade Litz cable for this specific application
from White Gold. JFET differential built around Toshiba 2SK170 among the most noiseless transistor of the current production.

The PM7400MKII is a very easy to operate stereo pre-amplifier that is suitable for many applications like clubs, bars, restaurants, fitness, audiovisual, ...Preamplifier PHONO *Transforms phono to line *Input stereo rca, output stereo rca & 1/4” TRS *Power supply DC 12V included
Weight1.00 kg1.00 kg0.50 kg9.00 kg3.10 kg0.30 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 1.00 kg
Weight 0.50 kg
Weight 9.00 kg
Weight 3.10 kg
Weight 0.30 kg