REGA Fono MC Phono Stage

390.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: FONO MC Phono stage Category:
The Fono MC is an exceptionally high quality MC phono stage designed to maximise the potential of any MC cartridge. Although specifically to compliment the latest Rega range of  moving coils you will find full adjustability for loading is available via dip switches conveniently placed on the rear panel with two different gain settings located on the back panel making the […]

 

Read more

The Fono MC is an exceptionally high quality MC phono stage designed to maximise the potential of any MC cartridge. Although specifically to compliment the latest Rega range of  moving coils you will find full adjustability for loading is available via dip switches conveniently placed on the rear panel with two different gain settings located on the back panel making the Fono MC compatible with most low output MC cartridges.

The Fono MC has been designed to be effective, easy to use, and above all, to reproduce music. The Fono MC uses the Linear Systems low noise LSK389 FET in an all discrete input stage where low noise and linearity are vitally important to get the best from an MC cartridge. Because of the high input impedance of FET, the loading effects of the amplifier circuit are minuscule and do not affect the performance of the cartridge.

A MUSE operational amplifier is used in the RIAA equalization amplifier. Polypropylene capacitors have been used in the signal path and in the RIAA equalization circuits. There is selectable input loading for both resistance and capacitance along with two different gain settings located on the back panel making the Fono MC compatible with most low output MC cartridges.

The aesthetic design of the Fono MC was as important as the quality of its electrical capabilities, so it benefits from the same aluminium case as the Rega TTPSU and Fono MM amplifier, giving it a design which offers a familiar feel and moreover brings it in line with its illustrious bigger brothers. The new Fono MC circuit resulted from the design work carried out on the Aria phono amplifier.

The Fono disk stage is designed to amplify the signal from a moving coil cartridge to a level which can feed into a 200mV line level input on a standard hi-fi amplifier.

Specifications

Output impedance = 200Ω
Recommended minimum output load resistance = 5K
Frequency response (50KΩ output load) = 13Hz (-3dB) to 100KHz (-0.3dB)
RIAA accuracy (50KΩ output load) = Better than +/-0.2dB 100Hz to 100KHz
Power requirements = 24V AC at 150mA maximum. Only to be used with Rega PS1.

Input sensitivity (for 200mV output)
4 off = 133uV
4 on = 67uV

Input loading resistance
1 and 2 off = 400Ω
1 on = 100Ω
2 on = 150Ω
1 and 2 on = 70Ω

Input loading capacitance
3 off = 1000pF
3 on = 4300pF
Gain (at 1KHz)
4 off = 63.5dB
4 on = 69.5dB

Maximum input level (at 1KHz)
4 off = 6.7mV
4 on = 3.4mV

Load settings for adjustable MC stages

Impedance -100ohm
Capacitance – 1000pF
Gain setting – High (\’On\’ position for Rega phono stages)

Fono MC dip switches settings (factory set at Rega for Rega MC models).

Weight 1.50 kg

Reviews

There are no reviews yet.

Be the first to review “REGA Fono MC Phono Stage”

Your email address will not be published. Required fields are marked *

Quick Comparison

REGA Fono MC Phono Stage removeREGA EAR Headphone Amplifier removeN-AUDIO PP400 Phono-RIAA Amplifier removeREGA Fono Mini A2D MM phono stage Preamplifier removeTHORENS MM-008 Phono Preamplifier removePro-Ject Phono Box USBMM/MC Phono preamp with line & USB outputs remove
NameREGA Fono MC Phono Stage removeREGA EAR Headphone Amplifier removeN-AUDIO PP400 Phono-RIAA Amplifier removeREGA Fono Mini A2D MM phono stage Preamplifier removeTHORENS MM-008 Phono Preamplifier removePro-Ject Phono Box USBMM/MC Phono preamp with line & USB outputs remove
Image
SKUFONO MC Phono stageEARN-AUDIO PP400Fono Mini A2DMM 008Phono Box USB
Rating
Price390.00 incl. GR VAT250.00 incl. GR VAT 31.82 incl. GR VAT 353.00 incl. GR VAT299.00 incl. GR VAT149.00 incl. GR VAT
Stock

In stock

In stock

In stock

In stock

In stock

In stock

AvailabilityIn stockIn stockIn stockIn stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The Fono MC is an exceptionally high quality MC phono stage designed to maximise the potential of any MC cartridge. Although specifically to compliment the latest Rega range of  moving coils you will find full adjustability for loading is available via dip switches conveniently placed on the rear panel with two different gain settings located on the back panel making the Fono MC compatible with most low output MC cartridges.

The Fono MC has been designed to be effective, easy to use, and above all, to reproduce music. The Fono MC uses the Linear Systems low noise LSK389 FET in an all discrete input stage where low noise and linearity are vitally important to get the best from an MC cartridge. Because of the high input impedance of FET, the loading effects of the amplifier circuit are minuscule and do not affect the performance of the cartridge.

A MUSE operational amplifier is used in the RIAA equalization amplifier. Polypropylene capacitors have been used in the signal path and in the RIAA equalization circuits. There is selectable input loading for both resistance and capacitance along with two different gain settings located on the back panel making the Fono MC compatible with most low output MC cartridges.

The aesthetic design of the Fono MC was as important as the quality of its electrical capabilities, so it benefits from the same aluminium case as the Rega TTPSU and Fono MM amplifier, giving it a design which offers a familiar feel and moreover brings it in line with its illustrious bigger brothers. The new Fono MC circuit resulted from the design work carried out on the Aria phono amplifier.

The Fono disk stage is designed to amplify the signal from a moving coil cartridge to a level which can feed into a 200mV line level input on a standard hi-fi amplifier.

Specifications

Output impedance = 200Ω
Recommended minimum output load resistance = 5K
Frequency response (50KΩ output load) = 13Hz (-3dB) to 100KHz (-0.3dB)
RIAA accuracy (50KΩ output load) = Better than +/-0.2dB 100Hz to 100KHz
Power requirements = 24V AC at 150mA maximum. Only to be used with Rega PS1.

Input sensitivity (for 200mV output)
4 off = 133uV
4 on = 67uV

Input loading resistance
1 and 2 off = 400Ω
1 on = 100Ω
2 on = 150Ω
1 and 2 on = 70Ω

Input loading capacitance
3 off = 1000pF
3 on = 4300pF
Gain (at 1KHz)
4 off = 63.5dB
4 on = 69.5dB

Maximum input level (at 1KHz)
4 off = 6.7mV
4 on = 3.4mV

Load settings for adjustable MC stages

Impedance -100ohm
Capacitance - 1000pF
Gain setting - High (\'On\' position for Rega phono stages)

Fono MC dip switches settings (factory set at Rega for Rega MC models).

Developed by our engineers, the new Ear benefits from a completely new surface mount PCB layout based on the hugely successful Brio-R amplifier. Exceptional performance is guaranteed with the convenience of independent mute, volume control and multiple connectivity options to integrate perfectly into any users system.

Power Supplies & Noise Reduction

The Ear pushes the Brio-R power amplifier circuit concept to a new level with the use of a low noise, fully regulated, supply. Noise has also been kept to a minimum by the use of an external mains transformer. The Ear exceeds the voltage requirements of IEC 268-15. This along with low output impedance makes it suitable for studio use as well as a hi-fi headphone amplifier. The Ear operates in Class A at normal listening levels.

High Quality Components

The Ear utilises the highest quality components and our engineers’ experience, to achieve the best sonic performance. Utilising the design ideals of the ‘cascaded emitter follower output stage’ with a pair of complementary Darlington output transistors, along with polyester film and Nichicon FG capacitors in critical positions, ensures it is our most advanced performing headphone amplifier to date.

Custom Case

Housed in a compact custom case, the Ear is designed to match the current range of Rega electronics with a matching, high gloss, front facia.The new Ear Headphone amplifier benefits from an all new extruded aluminium case and new styling giving it more of a family feel to match its illustrious big brothers. The Ear simply connects to the tape output of an amplifier via phono leads. The headphones are plugged into the front panel and there is a link socket in case you need your tape output sockets for other use.

Hi Fi News reviews the Rega Ear headphone amplifier:

\'The Rega Ear is lovely, in so many ways. It is beautifully made, stylish and has all the facilities you really need, plus a delightful sound that stirs the soul regardless of whatever music you put through it. Wonderfully expansive and big hearted, it makes listening a pleasure. Tonally it\'s slightly on the warm side, so suits poor quality sources down to the ground - even an iPad sounds good via the Rega!\' - January 2014.

  • Maximum output level - 25 load 775mW, 32 load 685mW, 50 load 530mW, 100 load 320mW, 600 load 60mW
  • Open circuit voltage 6v
  • Input impedance 20K, Gain 28dB
  • Frequency response 12Hz to 37kHz
  • THD typically 0.003%
  • Signal to noise ratio referenced to max output level -100dB (22Hz – 22kHz)
  • Maximum Power requirements - 24VAC at 225mA (685mW 32)
  • Dimensions: W 178mm x D 155mm x H 45mm.
Preamplifier PHONO *Transforms phono to line *Input stereo rca, output stereo rca & 1/4” TRS *Power supply DC 12V includedThe Rega Fono Mini A2D is a high quality phono pre-amplifier for use with any moving magnet cartridge. The addition of USB interface allows you to easily transfer vinyl to your PC. The Fono Mini A2D is designed to amplify the signal from a moving magnet cartridge to a suitable level for all line level inputs of an audio amplifier. The new Fono Mini A2D benefits from an extruded aluminium case and very user friendly front and back panels that make this phono pre-amplifier a very easy product to use. The Fono Mini A2D amplifier offers exceptional performance and incredible value for money and promises to be a valuable addition to any hi-fi set up. To transfer vinyl to your PC, you will need to install a digital audio editor. Such software is widely available as a free download (such as Audacity), from the internet. This is a simple interface which allows monitoring of volume and balance whilst transferring your audio to your PC hard drive. Audio editing software includes a level meter which indicates the output level achieved when playing a piece of vinyl. You should adjust the output as necessary via the ‘Level’ control located on the front panel. Always take special note of record levels to ensure optimum recording quality. This is a cost effective version of the Fono MM and based on the phono amplifier as used in the Brio-R amplifier. Simply switch on, sit back and enjoy!
  • Input sensitivity: 5mV for 500mV output
  • Input loading: 47k +100pF
  • Maximum input level: 70mV @ 1kHz
  • Output Impedance: 100 Ohms
  • Signal to noise ratio: 78dBA ref 5mV
  • Power requirements: 24VAC 85mA
  • Input for full scale digital output: 7.5mV
  • Dimensions  W 102mm x D 125mm x H 30mm

Both Microsoft® Windows® and Apple® Mac OS® come with very simple audio recording software pre-installed. However, to take full advantage of the high-resolution recording facilities offered by the MM 008 ADC, we recommend recording software that can record at 24 bits/96 kHz and save lossless high-resolution audio files such as FLAC or Apple® Lossless. 

Specs:

  • Mode: MM/MC (switchable)
  • Gain at 1 kHz: 40 dB (MM)/60 dB (MC)
  • Input impedance (MM): 47 kΩ + 220 pF fixed
  • Input impedance (MC): 47 kΩ + 1 nF (modifiable with external load plugs)
  • Frequency response (flat): 20 Hz - 20 kHz ±0.3 dB
  • Frequency response (-3 dB): 10 Hz - 50 kHz
  • RIAA curve accuracy: ±0.3 dB
  • THD+N: 72 dB (MC)
  • Crosstalk: ≧40 dB
  • Input sensitivity (MM): 3.29 mVrms for -10 dBV output (316 mVrms)
  • Input sensitivity (MC): 0.325 mVrms for -10 dBV output (316 mVrms)
  • Max. output voltage: 482 mVrms at 5 mVrms input (1 kHz)
  • Output impedance: 47 Ω
  • Input connections: 3 pairs of RCA sockets (left/right)
  • Output connections: 1 pair of RCA sockets (left/right)
  • Power supply: 24 V DC
  • Power consumption: 3.4 W/15 mA
  • Weight: 504 g (not including power supply)
  • Dimensions:  (W x H x D): 150 x 50 x 117 mm
  • Input impedance, MM 47kohms/120pF
  • Input impedance, MC 100ohms/120pF
  • Gain, MM 40dB
  • Output voltage typically 300mV/1kHz at 3mV/1kHz (MM input)
  • Gain, MC 60dB
  • Output voltage typically 300mV/1kHz at 0,3mV/1kHz (MC input)
  • Max. output 9,5V (1kHz)
  • Noise floor, MM 86dB (94dB - A weighted)
  • Noise floor, MC 68dB (75dB - A weighted)
  • THD, MM 0,01%
  • THD, MC 0,05%
  • RIAA-equalisation curve accuracy 20Hz - 20kHz / max. 0,5dB
  • A/D converter -Bit Delta Sigma
  • USB output digital serial data protocol USB 1.1
  • Operating systems Windows®, MacOS® and Linux®
  • THD: 0.005% - Noise floor: 96dB - Dynamic range: 93dB - Outboard power supply: 16V/200mA AC, suitable for your country's mains supply
  • Power consumption: 16V/100mA AC -Dimension W x H x D: 103 x 38 x 115mm - Weight: 570g without power supply

 

Manual/Εγχειρίδιο

Weight1.50 kg1.50 kg0.30 kg1.00 kg0.50 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.50 kg
Weight 1.50 kg
Weight 0.30 kg
Weight 1.00 kg
Weight 0.50 kg
Weight 1.00 kg