REGA Fono MC Phono Stage

390.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: FONO MC Phono stage Category:
The Fono MC is an exceptionally high quality MC phono stage designed to maximise the potential of any MC cartridge. Although specifically to compliment the latest Rega range of  moving coils you will find full adjustability for loading is available via dip switches conveniently placed on the rear panel with two different gain settings located on the back panel making the […]

 

Read more

The Fono MC is an exceptionally high quality MC phono stage designed to maximise the potential of any MC cartridge. Although specifically to compliment the latest Rega range of  moving coils you will find full adjustability for loading is available via dip switches conveniently placed on the rear panel with two different gain settings located on the back panel making the Fono MC compatible with most low output MC cartridges.

The Fono MC has been designed to be effective, easy to use, and above all, to reproduce music. The Fono MC uses the Linear Systems low noise LSK389 FET in an all discrete input stage where low noise and linearity are vitally important to get the best from an MC cartridge. Because of the high input impedance of FET, the loading effects of the amplifier circuit are minuscule and do not affect the performance of the cartridge.

A MUSE operational amplifier is used in the RIAA equalization amplifier. Polypropylene capacitors have been used in the signal path and in the RIAA equalization circuits. There is selectable input loading for both resistance and capacitance along with two different gain settings located on the back panel making the Fono MC compatible with most low output MC cartridges.

The aesthetic design of the Fono MC was as important as the quality of its electrical capabilities, so it benefits from the same aluminium case as the Rega TTPSU and Fono MM amplifier, giving it a design which offers a familiar feel and moreover brings it in line with its illustrious bigger brothers. The new Fono MC circuit resulted from the design work carried out on the Aria phono amplifier.

The Fono disk stage is designed to amplify the signal from a moving coil cartridge to a level which can feed into a 200mV line level input on a standard hi-fi amplifier.

Specifications

Output impedance = 200Ω
Recommended minimum output load resistance = 5K
Frequency response (50KΩ output load) = 13Hz (-3dB) to 100KHz (-0.3dB)
RIAA accuracy (50KΩ output load) = Better than +/-0.2dB 100Hz to 100KHz
Power requirements = 24V AC at 150mA maximum. Only to be used with Rega PS1.

Input sensitivity (for 200mV output)
4 off = 133uV
4 on = 67uV

Input loading resistance
1 and 2 off = 400Ω
1 on = 100Ω
2 on = 150Ω
1 and 2 on = 70Ω

Input loading capacitance
3 off = 1000pF
3 on = 4300pF
Gain (at 1KHz)
4 off = 63.5dB
4 on = 69.5dB

Maximum input level (at 1KHz)
4 off = 6.7mV
4 on = 3.4mV

Load settings for adjustable MC stages

Impedance -100ohm
Capacitance – 1000pF
Gain setting – High (\’On\’ position for Rega phono stages)

Fono MC dip switches settings (factory set at Rega for Rega MC models).

Weight 1.50 kg

Reviews

There are no reviews yet.

Be the first to review “REGA Fono MC Phono Stage”

Your email address will not be published. Required fields are marked *

Quick Comparison

REGA Fono MC Phono Stage removeNorth Star LINESTAGE SE PREAMP PRE AMPLIFIER removeNorth Star PHONO STAGE MM/MC HIGH LOW PRE AMPLIFIER BLACK removeREGA Fono Mini A2D MM phono stage Preamplifier removeYAMAHA CX-A5200 (BL) Home Cinema Pre-amplifier 11.2 removeJBL CSM-14 PRE-AMP 4IN & 1 OUT remove
NameREGA Fono MC Phono Stage removeNorth Star LINESTAGE SE PREAMP PRE AMPLIFIER removeNorth Star PHONO STAGE MM/MC HIGH LOW PRE AMPLIFIER BLACK removeREGA Fono Mini A2D MM phono stage Preamplifier removeYAMAHA CX-A5200 (BL) Home Cinema Pre-amplifier 11.2 removeJBL CSM-14 PRE-AMP 4IN & 1 OUT remove
Image
SKUFONO MC Phono stageLINESTAGE SEPHONO STAGE BFono Mini A2DS090.31176CSM-14
Rating
Price390.00 incl. GR VAT 2,216.17 incl. GR VAT 1,458.00 incl. GR VAT 353.00 incl. GR VAT 2,390.00 incl. GR VAT 517.00 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

In stock

In stock

Available on backorder

AvailabilityIn stockAvailable on backorderAvailable on backorderIn stockIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The Fono MC is an exceptionally high quality MC phono stage designed to maximise the potential of any MC cartridge. Although specifically to compliment the latest Rega range of  moving coils you will find full adjustability for loading is available via dip switches conveniently placed on the rear panel with two different gain settings located on the back panel making the Fono MC compatible with most low output MC cartridges.

The Fono MC has been designed to be effective, easy to use, and above all, to reproduce music. The Fono MC uses the Linear Systems low noise LSK389 FET in an all discrete input stage where low noise and linearity are vitally important to get the best from an MC cartridge. Because of the high input impedance of FET, the loading effects of the amplifier circuit are minuscule and do not affect the performance of the cartridge.

A MUSE operational amplifier is used in the RIAA equalization amplifier. Polypropylene capacitors have been used in the signal path and in the RIAA equalization circuits. There is selectable input loading for both resistance and capacitance along with two different gain settings located on the back panel making the Fono MC compatible with most low output MC cartridges.

The aesthetic design of the Fono MC was as important as the quality of its electrical capabilities, so it benefits from the same aluminium case as the Rega TTPSU and Fono MM amplifier, giving it a design which offers a familiar feel and moreover brings it in line with its illustrious bigger brothers. The new Fono MC circuit resulted from the design work carried out on the Aria phono amplifier.

The Fono disk stage is designed to amplify the signal from a moving coil cartridge to a level which can feed into a 200mV line level input on a standard hi-fi amplifier.

Specifications

Output impedance = 200Ω
Recommended minimum output load resistance = 5K
Frequency response (50KΩ output load) = 13Hz (-3dB) to 100KHz (-0.3dB)
RIAA accuracy (50KΩ output load) = Better than +/-0.2dB 100Hz to 100KHz
Power requirements = 24V AC at 150mA maximum. Only to be used with Rega PS1.

Input sensitivity (for 200mV output)
4 off = 133uV
4 on = 67uV

Input loading resistance
1 and 2 off = 400Ω
1 on = 100Ω
2 on = 150Ω
1 and 2 on = 70Ω

Input loading capacitance
3 off = 1000pF
3 on = 4300pF
Gain (at 1KHz)
4 off = 63.5dB
4 on = 69.5dB

Maximum input level (at 1KHz)
4 off = 6.7mV
4 on = 3.4mV

Load settings for adjustable MC stages

Impedance -100ohm
Capacitance - 1000pF
Gain setting - High (\'On\' position for Rega phono stages)

Fono MC dip switches settings (factory set at Rega for Rega MC models).

High rigidity metal frame
• Shielded power supply
• Separated toroidals for analogue and digital
• Rubber insulated aluminium feet
• WBT and Neutrik connectors
• Fully discrete analogue design
• Motorized ALPS blue series volume
control
• Buffer and Gain cards on socket for future
upgrades
• Metal machined remote control
• Trigger signal for link to Monoblock amplifier

BLACK
 
Bandwidth 5Hz to 90kHz, -3dB Maximum output
voltage 8.5Vrms (47 kOhm load)
Overall gain 40dB-60dB @ 1kHz selectable with
dip- switch.
Input Impedance 29 Ohm - 100 kOhm selectable
with dip-switch.Selectable input Capacitance.
Input Unbalanced 1 pair x channel (RCA)WBT
Output Unbalanced(RCA)WBT - MM,
high output
MC, low output MC.
Handmade Litz cable for this specific application
from White Gold. JFET differential built around Toshiba 2SK170 among the most noiseless transistor of the current production.

The Rega Fono Mini A2D is a high quality phono pre-amplifier for use with any moving magnet cartridge. The addition of USB interface allows you to easily transfer vinyl to your PC. The Fono Mini A2D is designed to amplify the signal from a moving magnet cartridge to a suitable level for all line level inputs of an audio amplifier. The new Fono Mini A2D benefits from an extruded aluminium case and very user friendly front and back panels that make this phono pre-amplifier a very easy product to use. The Fono Mini A2D amplifier offers exceptional performance and incredible value for money and promises to be a valuable addition to any hi-fi set up. To transfer vinyl to your PC, you will need to install a digital audio editor. Such software is widely available as a free download (such as Audacity), from the internet. This is a simple interface which allows monitoring of volume and balance whilst transferring your audio to your PC hard drive. Audio editing software includes a level meter which indicates the output level achieved when playing a piece of vinyl. You should adjust the output as necessary via the ‘Level’ control located on the front panel. Always take special note of record levels to ensure optimum recording quality. This is a cost effective version of the Fono MM and based on the phono amplifier as used in the Brio-R amplifier. Simply switch on, sit back and enjoy!
  • Input sensitivity: 5mV for 500mV output
  • Input loading: 47k +100pF
  • Maximum input level: 70mV @ 1kHz
  • Output Impedance: 100 Ohms
  • Signal to noise ratio: 78dBA ref 5mV
  • Power requirements: 24VAC 85mA
  • Input for full scale digital output: 7.5mV
  • Dimensions  W 102mm x D 125mm x H 30mm
  • 11.2-Channel Preamplifier Configuration
  • Dolby Atmos & DTS:X Compatibility
  • RCA & Balanced XLR Pre-Outs
  • Bluetooth, Wi-Fi, AirPlay Connectivity
  • 7 x HDMI Inputs / 3 x HDMI Outputs
  • HDR10, Dolby Vision, HLG Pass-Through
  • HDMI Upscaling
  • Works with Amazon Alexa
  • Integrated AM/FM Tuners

Enjoy streaming audio and immersive multi-channel sound with your amplifier and the Yamaha AVENTAGE CX-A5200 11.2-Channel MusicCast Preamplifier. It sports an 11.2-channel XLR pre-out and features Dolby Atmos and DTS:X compatibility for object-based audio decoding. Built-in Bluetooth and AirPlay support allows the preamplifier to wirelessly stream music from compatible sources, such as smartphones and tablets.

Onboard Wi-Fi and Ethernet connectivity allows the AVENTAGE CX-A5200 to access music from your connected computer or NAS. Amazon Alexa compatibility enables you to control certain functions of the preamplifier with just your voice through your Alexa-enabled devices. With seven HDMI inputs and three outputs, the CX-A5200 can act as a video switcher for your HD source components. It will pass through HDR UHD 4K signals as well as HDR10, Dolby Vision, and HLG HDR formats. The preamplifier also has a USB port for accessing media stored on USB flash drives.

Note: Access to certain Internet-based content may require a subscription to a service.

Surround:AIThis AI technology built into the DSP analyzes the scene of your content and creates a surround effect to help reproduce it with augmented realism. In real time, this AI analyzes scenes by focusing on distinct sound elements, such as dialogue, background music, ambient sounds, and sound effects, and automatically enhances the surround effect to help provide greater realism.Dolby Atmos & DTS:XThese object-based sound technologies are designed to create realistic surround sound, positioning and moving individual sounds to nearly any virtual point in your room, including overhead.CINEMA DSP HD3In addition to Dolby Atmos, DTS:X, and conventional channel-based audio, a 3D space can be simulated in which separate acoustic elements can move freely, providing a sensation of the motion of sound effects above your head. CINEMA DSP HD3 uses signal processing algorithms to help heighten this sense of realism.YPAO-RSC (Reflected Sound Control)YPAO-RSC analyzes the room acoustics with the included microphone to tune your system for optimal sound in your room. It uses RSC to correct early reflections for enhanced sound. YPAO 3D is designed to provide automatic sound parameter optimization that maximizes the 3D sound field of CINEMA DSP HD3 as well as Dolby Atmos and DTS:X, and with 64-bit EQ calculations, this technology helps produce natural room acoustics.Dual ESS SABRE PRO Premier (ES9026 PRO) DACsIncorporating two ESS SABRE PRO Premier (ES9026 PRO) DACs helps further enhance the signal-to-noise ratio and achieve up to 32-bit performance.Large Power Transformer with Vibration Dampening PlateThe CX-A5200 features a large power transformer to help maximize performance and precision. Deep, powerful sound is achieved with enhanced regulation of power, while a thick brass plate helps dampen unwanted vibrations.Thick Bottom PlateStabilizing the chassis is the key to enhanced performance and sound. The CX-A5200 achieves this by employing a thick bottom plate, which acts to steady and immobilize the entire structure and achieve optimal sound.Balanced Connections and XLR TerminalsElectrical noise is an inherent issue with cabling due to connection with other A/V components, the connections between them, and from other sources of external noise. To ensure that the CX-A5200 is not affected by such distortion, it uses balanced, noise-resistant terminals. Even the RCA unbalanced connections use a ground-sensing transmission method that achieves simple balanced transmission. Further, the XLR terminals allow for the use of long cables. The CX-A5200 also allows a balanced audio input connection from audiophile-grade source components such as CD players.Built-In Streaming ServicesWith built-in music streaming services and connectivity options, you can enjoy all your content, including Internet radio stations and music from your compatible smart devices with the CX-A5200.Voice Control with Amazon Alexa and MusicCastWith Alexa voice control integration, all you have to do is ask. Use any Alexa-enabled device to control either the amplifier by itself or multiple MusicCast devices throughout your home.Bluetooth and AirPlay CompatibilityThe CX-A5200 features Bluetooth connectivity for simple, convenient wireless msuic streaming from your compatible smart devices, including smartphones, tablets, and laptops. iTunes and iOS users can use AirPlay to wirelessly stream audio seamlessly from compatible devices.MusicCast for Whole-Home MusicMusicCast makes it easy to share audio throughout the home using your Wi-Fi network. The CX-A5200 is designed to work seamlessly with other MusicCast products, including multi-room streaming amplifiers, soundbars, wireless speakers, and hi-fi gear, and they\'re all controllable from the MusicCast app or from a third-party control system such as Control4, RTI, or ELAN.Additional Features
  • 34 Cinema DSP programs
  • Dialogue level adjustment
  • Virtual presence speaker & virtual surround back speaker
  • Dialogue lift (no presence speakers required)
  • Virtual CINEMA FRONT
  • Pure Direct (with video on mode)
  • Compressed music enhancer
  • High-resolution music enhancer
  • YPAO Volume
  • Adaptive DRC (Dynamic Range Control)
  • Initial volume and maximum volume setting
  • A.R.T. Wedge
  • 0 to 500 ms audio delay
  • Analog to HDMI & HDMI to HDMI upscaling
  • Video adjustment
  • Deep Color, x.v.Color, 24 Hz refresh rate, and auto lip-sync support
  • HDR10, Dolby Vision, HLG, and BT.2020 support
  • HDMI CEC (SCENE, device control)
  • Graphical user interface
  • Eight SCENE PLUS sets
  • App control (iOS/Android)
  • Web browser control
  • Full LED-backlit remote control
  • Zone GUI
  • Party Mode
  • Auto Power Standby
  • ECO Mode

Audio
Audio Formats Dolby Atmos, Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS:X, DTS-HD Master Audio
D/A Converter 2 x ESS 384 kHz / 32-bit SABRE PRO Premier DAC ES9026PRO for all channels
Video
HDR Support HDR10, Dolby Vision, HLG pass-through
HDCP Version 2.2
Upscaling Up to 4K/60p, 4:4:4, analog to HDMI, HDMI to HDMI
Physical Specifications
Power Requirements 120 VAC, 60 Hz
Standby Power Consumption ≤0.1 W
Dimensions (W x H x D) With Antenna Down: 17.13 x 7.5 x 18.63 / 43.5 x 19.05 x 47.31 cm
With Antenna Up: 17.13 x 10.63 x 18.63 / 43.5 x 26.99 x 47.31 cm
Weight 33.5 lb / 15.2 kg
Bluetooth Version: 4.2
Supported Profiles: A2DP, AVRCP
Supported Codecs: SBC, AAC
Class: Class 2
Range: 33\' / 10 m
AirPlay Yes
Wi-Fi Yes, dual-band (2.4/5 GHz)
Supported File Types MP3, WMA, WAV, MPEG-4 AAC up to 48 kHz / 16-bit, ALAC up to 96 kHz / 24-bit, FLAC up to 384 kHz / 24-bit, AIFF up to 384 kHz / 32-bit, up to 11.2 MHz
Inputs 7 x HDMI
2 x RCA component video
4 x RCA composite video
3 x optical TOSLINK
3 x digital coaxial
1 x 2-channel XLR
8 x stereo RCA (1 front)
1 x stereo RCA phono with ground screw
1 x 5.1-channel RCA
1 x USB (front)
Outputs 3 x HDMI
1 x 11.2-channel XLR pre-out
1 x 11.2-channel RCA pre-out
2 x stereo RCA pre-outs (Zone 2/3)
1 x 1/4" / 6.35 mm headphone (front)
Other Ports 1 x RJ45 Ethernet LAN
2 x 1/8" / 3.5 mm trigger out
1 x 1/8" / 3.5 mm remote in
1 x 1/8" / 3.5 mm remote out
1 x RS-232C
2 x wireless antennas
1 x FM antenna in
1 x AM antenna in
1 x 1/8" / 3.5 mm YPAO mic in (front)

Backed by the combined technological prowess of multiple HARMAN brands, the JBL Commercial Series Mixers (CSM) deliver unsurpassed quality in commercial sound. Easily configured for a range of applications, such as background music, security, and paging, CSM units are designed for everything from schools and hospitals to restaurants and fitness facilities. They feature RJ45 connectors for use with JBLCSR-V in-wall volume controls, and a universal power supply that accepts AC voltages from 100 to 240 VAC, 50/60 Hz. Plus, theyʼre built using HARMANʼs GreenEdge clean standards to offer numerous energy-efficient benefits, including a lighter weight, space-saving design, and conforming to RoHS standards. 4 or 8 inputs with 1 or 2 channel outputs Fanless, space-saving 1U design Configurable output routing (2 channel models only) Independent base/treble controls Euro-block type mic/line input and output connectors, and unbalanced RCA inputs for consumer connection Supports JBL CSR-V wall controller via Ethernet cable Priority muting, VOX ducking, and phantom power for all models

Weight1.50 kg10.00 kg9.00 kg1.00 kg15.00 kg2.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.50 kg
Weight 10.00 kg
Weight 9.00 kg
Weight 1.00 kg
Weight 15.00 kg
Weight 2.00 kg