Content |
Developed by our engineers, the new Ear benefits from a completely new surface mount PCB layout based on the hugely successful Brio-R amplifier. Exceptional performance is guaranteed with the convenience of independent mute, volume control and multiple connectivity options to integrate perfectly into any users system.
Power Supplies & Noise Reduction
The Ear pushes the Brio-R power amplifier circuit concept to a new level with the use of a low noise, fully regulated, supply. Noise has also been kept to a minimum by the use of an external mains transformer. The Ear exceeds the voltage requirements of IEC 268-15. This along with low output impedance makes it suitable for studio use as well as a hi-fi headphone amplifier. The Ear operates in Class A at normal listening levels.
High Quality Components
The Ear utilises the highest quality components and our engineers’ experience, to achieve the best sonic performance. Utilising the design ideals of the ‘cascaded emitter follower output stage’ with a pair of complementary Darlington output transistors, along with polyester film and Nichicon FG capacitors in critical positions, ensures it is our most advanced performing headphone amplifier to date.
Custom Case
Housed in a compact custom case, the Ear is designed to match the current range of Rega electronics with a matching, high gloss, front facia.The new Ear Headphone amplifier benefits from an all new extruded aluminium case and new styling giving it more of a family feel to match its illustrious big brothers. The Ear simply connects to the tape output of an amplifier via phono leads. The headphones are plugged into the front panel and there is a link socket in case you need your tape output sockets for other use.
Hi Fi News reviews the Rega Ear headphone amplifier:
\'The Rega Ear is lovely, in so many ways. It is beautifully made, stylish and has all the facilities you really need, plus a delightful sound that stirs the soul regardless of whatever music you put through it. Wonderfully expansive and big hearted, it makes listening a pleasure. Tonally it\'s slightly on the warm side, so suits poor quality sources down to the ground - even an iPad sounds good via the Rega!\' - January 2014.
- Maximum output level - 25 load 775mW, 32 load 685mW, 50 load 530mW, 100 load 320mW, 600 load 60mW
- Open circuit voltage 6v
- Input impedance 20K, Gain 28dB
- Frequency response 12Hz to 37kHz
- THD typically 0.003%
- Signal to noise ratio referenced to max output level -100dB (22Hz – 22kHz)
- Maximum Power requirements - 24VAC at 225mA (685mW 32)
- Dimensions: W 178mm x D 155mm x H 45mm.
|
- Input impedance 47kohms/100pF
- Gain 32dB
- Output voltage typically 200mV/1kHz at 5mV/1kHz
- Noise floor 82dB (88dB - A weighted)
- THD
|
• MM & MC capable
• True dual mono design
• Balanced XLR & unbalanced RCA In & Outputs
• Fully passive RIAA & DECCA equalisation
• Unique continously variable input impedance loading,
matches every cartridge (adjustment even while playing)
• RCA & XLR In & Out
• Superior low noise / low distortion
• Classy & elegant dip switches
• DC power supply (
• Metal casing protects against vibration and interference
• Faceplate silver or black
Technical data | Pro-Ject Phono Box RS | Input impedance | Fixed 10 ohms or 47kohms, | | variable 10 - 1200 ohms | Load capacity switchable | 100pF 200pF, 300pF, 420pF, 520pF | Output impedance | 50 ohms | Gain, MM / MC | RCA: 40, 50, 60 dB | | XLR: 46, 56, 66 dB | Signal to noise ratio | 80dB (91dB - IEC -A) | THD | | RIAA accuracy | within 0,3dB/20Hz - 20kHz | SubsonIc | 20Hz / - 12dB | Input | RCA & XLR | Output | RCA & XLR | Power supply | +2x 18V/300mA DC; 220 - 240V, 50Hz | Power consumption | 150mA DC | dimensions W x H x D (T with sockets) | 206 x 72 x 200 (210)mm | |
2000g without power supply
|
Manual/Εγχειρίδιο
|
Azur 851C Upsampling DAC, CD Player and Digital Pre-amplifier Features Digital to Analogue Converter featuring S/PDIF and Toslink digital inputs, AES/EBU balanced digital input and USB audio inputs (all 24 bit compatible) CD playback Optional digital volume and channel balance control Balanced XLR and unbalanced RCA analogue audio outputs USB Audio input allowing streaming of up to 24-bit/192kHz audio from computer ATF2™ audio up-sampling to 24-bit/384kHz Twin Analog Devices AD1955 24 bit DACs delivering superior sound-staging and stereo imaging Selectable digital filters – linear phase, minimum phase, steep Audiophile grade toroidal transformer delivering ultra-low low noise and distortion Full metal casework design with thick brushed aluminium front panel and dual layer damped feet, giving enhanced resonance control RS232 controllable Eco-friendly Azur Navigator remote control with Cambridge Audio amplifier and iPod dock control Available in black and silver finishes
| Phono preamplifier with A/D converter and USB output
Record Box E: Pure vinyl listening pleasure plus recording functionality!
Record Box E is an high-quality phono preamplifier, that offers the possibility to convert your valuable vinyls into computer music data. Record Box E accepts both MM & MC cartridges and gives audiophile music experience at an entry level price. The integrated A/D converter operates with Windows and MAC operating systems and connects via USB to your computer. Therefore your valuable vinyl collection can be digitised, especially for use in portable music players. Advanced circuitry and SMD construction keep noise and distortion at a surprisingly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Record Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Record Box E can be connected easily to a line-input (AUX etc) of your amplifier.
- Amplification and RIAA equalisation for MM & MC
- Design principle inspired by Dr. Sykora
- Digitalisation of vinyl for recording direct to USB with suitable recording programs
- Automatic recognition, no additional drivers needed
- Runs on Windows®, Mac OS® & Linux operating systems
- SMD circuitry with special low noise components
- Internal metal shielding
- Small size allows installation close to record player
- Gold plated RCA connection sockets
- Outboard power supply included
- Black or White casing
Input capacitance/input impedance |
MC: 100 ohms/120 pF (low output MC) MM: 47kohms/120 pF (MM or high output MC) |
Gain, MM / MC |
40 dB / 60 dB |
Output voltage typically |
300 mV/1 kHz bei 3 mV/1 kHz (MM) oder 0.3 mV/1 kHz (MC) |
Max. output |
9,5 V (1 kHz) |
Noise floor MM / MC |
94 dB (A weighted) / 75 dB (A weighted) |
THD MM / MC |
<0,01% / <0,05% |
RIAA-equalisation curve accuracy |
20 Hz - 20 kHz / max. 0.5 dB |
A/D converter |
Burr Brown PCM2904 16-Bit Delta Sigma |
Sampling rates |
32, 44,1 and 48 kHz |
USB output |
5 pin Mini b Buchse |
USB signal |
digital serial data protocol USB 1.1 |
Operating systems |
Windows XP®, Windows Vista®, Windows 7®, Windows 8®, Mac OS, Linux |
Input / Line output |
1 pair RCA/Cinch sockets each |
Outboard power supply |
18 V / 500 mA DC, suitable for your country's mains supply |
Power consumption |
100 mA DC |
Dimensions W x H x D (D with sockets) |
120 x 32 x 100 (115) mm |
Weight |
250g without power supply |
| Preamplifier PHONO
*Transforms phono to line
*Input stereo rca, output stereo rca & 1/4” TRS
*Power supply DC 12V included |
Reviews
There are no reviews yet.