REGA Planar 1 PLUS Black Gloss Turntable

549.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available Available SKU: PLANAR 1 PLUS Category:
We asked ourselves, how do we make the most successful turntable we have ever made sound better, be even easier to use and be more accessible to a wider audience?  The answer was simple; our engineers added a custom designed, high quality, moving magnet phono stage based around the multi-award winning What Hi-Fi? 5 Star Fono Mini. For the Planar 1 Plus, we wanted to […]

 

Read more

We asked ourselves, how do we make the most successful turntable we have ever made sound better, be even easier to use and be more accessible to a wider audience?  The answer was simple; our engineers added a custom designed, high quality, moving magnet phono stage based around the multi-award winning What Hi-Fi? 5 Star Fono Mini.

For the Planar 1 Plus, we wanted to optimise this circuit for ultimate performance so we have removed the USB interface and used the money saved to improve what was already a stunning disc stage.

The new built in stage offers the ability to connect the Planar 1 Plus directly to almost any system that has a standard line input via a standard phono to phono cable (supplied) or phono to 3.5mm lead. Simply put, there is no need to purchase a standalone phono stage or use an amplifier with a built in stage. Your Planar 1 Plus will connect directly to any standard Line Level input (such as you would connect a CD player to).

There are obvious audio advantages to housing the phono stage directly beneath the tonearm. The carefully shielded tonearm wire is soldered directly to the stage which prevents any unwanted pick up via the usual external cable between the arm and stage.

The Planar 1 Plus benefits from all of the advantages of its sibling, the Planar 1, such as a low noise 24v motor, precision hub bearing assembly and hand made RB110 tonearm with a factory fitted Rega Carbon cartridge. Set-up remains possible in under 30 seconds making this the easiest to use, and most flexible Rega turntable to date.

Stick on your favourite LP, sit back and enjoy!

Key Features:

Built-in Phono Stage
The built-in phono stage is a high specification pre-amplifier. It is designed to amplify the signal from a moving magnet cartridge to a suitable level for all line level inputs of an appropriate system or audio amplifier. This allows simple connection to a wide variety of products using either the standard twin phono to phono lead (supplied) or phono to 3.5 mm plug (not supplied).

Tonearm
Brand new RB110 tonearm built with the new Rega designed, bespoke, zero play bearings with ultra-low friction performance (Patent Pending). New bias assembly and integrated arm clip. Includes automatic bias adjustment negating the need for the user to set bias, making this the most ‘Plug & Play’ turntable we have ever manufactured. New ergonomically, re-designed and stiffer headshell for improved usability and appearance.

Cartridge
Rega Carbon moving magnet cartridge supplied fitted as standard.

Motor
24v, synchronous AC motor with a new motor PCB and aluminium pulley offering low noise and better speed stability.

Plinth
Brand new Thermoset, gloss laminated plinth with vastly improved appearance and new ergonomically positioned on/off switch located on the underside. Two stunning plinth finishes available, gloss black and gloss white.

Central Bearing housing
Re-designed brass main bearing, offering improved fit and removing stress on the bearing itself while minimising the transfer of potential energy. (Patent pending)

Platter
23mm, high mass, phenolic platter with improved flywheel effect for improved speed stability.

Re-Designed feet
New improved feet to increase stability and reduce vibration transfer.

Motor cover tray
New motor cover tray with integrated cooling.

Balance Weight
New 111g ‘Plug and Play’ balance weight.

Use only with a Rega PS1 350 mA power supply.

50 Hz: 24 V AC 0.142 mA maximum power consumption 3.4 W.
60 Hz: 24 V AC 0.129 mA maximum power consumption 3.1 W.

Maximum Output Level (3.54 cm/s RMS 45 degrees CBS STR100 Band 6a and 7a): 370-410 mV

Output Impedance: 1 kΩ

Frequency Response (pre-amplifier only): 14 Hz (-3 dB Point) to 100 kHz (-0.6 dB Point)

RIAA Accuracy (pre-amplifier only): (100 Hz to 20 kHz) ± 0.4 dB typically better than ± 0.25 dB

Pre-amplifier Gain: 40 dB

Pre-amplifier Input Loading: 47 kΩ in parallel with 220 pF
Signal to Noise Ratio: -75 dB A-weighted ref maximum output.
Power Requirements: 50 Hz 24 V AC 0.142 mA 3.4 W – 60 Hz 24 V AC 0.129 mA 3.1 W

Dimensions (lid closed) H 11.7 x W 44.7 x D 36 cm

Weight 4.35kg

Weight 5.00 kg

Reviews

There are no reviews yet.

Be the first to review “REGA Planar 1 PLUS Black Gloss Turntable”

Your email address will not be published. Required fields are marked *

Quick Comparison

REGA Planar 1 PLUS Black Gloss Turntable removePro-Ject Debut Carbon DC OM10 Turntable Green removePro-Ject Essential II with phono USB Turntable White removeJB Systems Q3-USB DJ TURNTABLE 33, 45, 78 rpm removeTHORENS TD 206 Belt drive turntable (Black hg) removePro-Ject Essential II with phono USB Turntable Red remove
NameREGA Planar 1 PLUS Black Gloss Turntable removePro-Ject Debut Carbon DC OM10 Turntable Green removePro-Ject Essential II with phono USB Turntable White removeJB Systems Q3-USB DJ TURNTABLE 33, 45, 78 rpm removeTHORENS TD 206 Belt drive turntable (Black hg) removePro-Ject Essential II with phono USB Turntable Red remove
Image
SKUPLANAR 1 PLUSDCOM10GESIIUSBW120011TD 206 BLACK HGESIIUSBRED
Rating
Price 549.00 incl. GR VAT449.00 incl. GR VAT 384.39 incl. GR VAT279.00 incl. GR VAT1,065.00 incl. GR VAT 384.39 incl. GR VAT
Stock

In stock

In stock

Only 1 left in stock

Available on backorder

Available on backorder

Only 1 left in stock

AvailabilityIn stockIn stockOnly 1 left in stockAvailable on backorderAvailable on backorderOnly 1 left in stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentWe asked ourselves, how do we make the most successful turntable we have ever made sound better, be even easier to use and be more accessible to a wider audience?  The answer was simple; our engineers added a custom designed, high quality, moving magnet phono stage based around the multi-award winning What Hi-Fi? 5 Star Fono Mini. For the Planar 1 Plus, we wanted to optimise this circuit for ultimate performance so we have removed the USB interface and used the money saved to improve what was already a stunning disc stage. The new built in stage offers the ability to connect the Planar 1 Plus directly to almost any system that has a standard line input via a standard phono to phono cable (supplied) or phono to 3.5mm lead. Simply put, there is no need to purchase a standalone phono stage or use an amplifier with a built in stage. Your Planar 1 Plus will connect directly to any standard Line Level input (such as you would connect a CD player to). There are obvious audio advantages to housing the phono stage directly beneath the tonearm. The carefully shielded tonearm wire is soldered directly to the stage which prevents any unwanted pick up via the usual external cable between the arm and stage. The Planar 1 Plus benefits from all of the advantages of its sibling, the Planar 1, such as a low noise 24v motor, precision hub bearing assembly and hand made RB110 tonearm with a factory fitted Rega Carbon cartridge. Set-up remains possible in under 30 seconds making this the easiest to use, and most flexible Rega turntable to date. Stick on your favourite LP, sit back and enjoy! Key Features: Built-in Phono Stage The built-in phono stage is a high specification pre-amplifier. It is designed to amplify the signal from a moving magnet cartridge to a suitable level for all line level inputs of an appropriate system or audio amplifier. This allows simple connection to a wide variety of products using either the standard twin phono to phono lead (supplied) or phono to 3.5 mm plug (not supplied). Tonearm Brand new RB110 tonearm built with the new Rega designed, bespoke, zero play bearings with ultra-low friction performance (Patent Pending). New bias assembly and integrated arm clip. Includes automatic bias adjustment negating the need for the user to set bias, making this the most ‘Plug & Play’ turntable we have ever manufactured. New ergonomically, re-designed and stiffer headshell for improved usability and appearance. Cartridge Rega Carbon moving magnet cartridge supplied fitted as standard. Motor 24v, synchronous AC motor with a new motor PCB and aluminium pulley offering low noise and better speed stability. Plinth Brand new Thermoset, gloss laminated plinth with vastly improved appearance and new ergonomically positioned on/off switch located on the underside. Two stunning plinth finishes available, gloss black and gloss white. Central Bearing housing Re-designed brass main bearing, offering improved fit and removing stress on the bearing itself while minimising the transfer of potential energy. (Patent pending) Platter 23mm, high mass, phenolic platter with improved flywheel effect for improved speed stability. Re-Designed feet New improved feet to increase stability and reduce vibration transfer. Motor cover tray New motor cover tray with integrated cooling. Balance Weight New 111g ‘Plug and Play’ balance weight. Use only with a Rega PS1 350 mA power supply. 50 Hz: 24 V AC 0.142 mA maximum power consumption 3.4 W. 60 Hz: 24 V AC 0.129 mA maximum power consumption 3.1 W. Maximum Output Level (3.54 cm/s RMS 45 degrees CBS STR100 Band 6a and 7a): 370-410 mV Output Impedance: 1 kΩ Frequency Response (pre-amplifier only): 14 Hz (-3 dB Point) to 100 kHz (-0.6 dB Point) RIAA Accuracy (pre-amplifier only): (100 Hz to 20 kHz) ± 0.4 dB typically better than ± 0.25 dB Pre-amplifier Gain: 40 dB Pre-amplifier Input Loading: 47 kΩ in parallel with 220 pF Signal to Noise Ratio: -75 dB A-weighted ref maximum output. Power Requirements: 50 Hz 24 V AC 0.142 mA 3.4 W – 60 Hz 24 V AC 0.129 mA 3.1 W Dimensions (lid closed) H 11.7 x W 44.7 x D 36 cm Weight 4.35kg

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the "mass market” – something all music lovers could afford.  

The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  

The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  

This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  

The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option.

Specifications:

  •  8,6” carbon tonearm  

  •  Increased platter size with more weight  

  •  Precision belt drive with synchronous motor  

  •  New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.  

  •  New TPE motor suspension  

  •  Felt mat  

  •  magnetic cartridge options from Ortofon OM 10 or 2M red  

  •  7 high-gloss colours

A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from MDF. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction.  

The main chassis is made from lightweight, but very stiff particle board. Essential II utilises a straight 8,6" aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play" solution, than itʽs predecessor. Special feet effectively decouples the turntable from the surface.

Specifications:

  • speed : 33, 45 (manual speed change)

  • principle : belt drive

  • Speed variance : 33: 0,14% 45: 0,25%

  • Wow & flutter : 0,12%

  • platter : 300mm MDF with felt mat (0,8kg)

  • main bearing : stainless steel

  • tonearm : 8,6” aluminium

  • effective : arm length 218,5 mm

  • overhang : 22,0mm

  • effective tonearmmass : 8,0gr

  • counterweight for mass : 3 - 5,5g (included)

  • tracking force range : 0 - 25mn (OM5 18mn recommended)

  • included accessory : power supply, dust cover

  • Power consumption : 4,5 watts

  • dimensions : 420 x 112 x 330mm (WxHxD)

  • weight : 4,0 kg net

JB Systems Q3-USB features: 

  • high torque direct drive motor 
  • fast start / stop 
  • 3 speeds: 33, 45, 78 rpm with quartz lock 
  • 2 pitch adjustment ranges: +/-10% ; +/-20% 
  • forward / reverse play 
  • starting torque: More than 1.6kgf / cm 
  • starting time: less than 1 second 
  • braking time: less than 1 second 
  • tracking error angle: less than 3° 
  • USB-output for direct recording to any PC 
  • free, multilingual Audacity software available via download: 
  • endless possibilities with free downloadable effect plug-ins 
  • import, export and edit Ogg Vorbis, MP3, AIFF and WAV sound files. 
  • cut, copy, splice, and mix sounds together. 
  • change the speed or pitch of a recording. 
  • remove static, hiss, hum, or other constant background noises. 
  • alter frequencies with Equalization, FFT Filter, and Bass Boost effects. 
  • adjust volumes with Compressor, Amplify, and Normalize effects. 
  • selectable phono/line output 
  • all functions are equipped with stylish, blue LED lights 
  • plastic dust cover 
  • retractable target light 
  • Audio Technica cartridge included 
  • all metal S-shaped tone arm assembly with: counterweight, anti-skating adjustment, lever lift with 
  • height adjustment 
  • adjustable large feet for perfect leveling 
  • phono output: 1,5~3,6mV 
  • line-output: 90~216mV 
  • PC interface: USB 1.1 compatible (Win XP/Vista/Win7 or Mac OS X) 
  • power supply: 230V 
  • power consumption: 11 watt 
  • dimensions: 450 x 352 x 157 mm 
  • weight: 10,5 kg

A MUSICAL FAMILY

The TD 206 and TD 209 turntables are the younger siblings of the revolutionary, multiple-award-winning TD 309. However, they don’t have to live in the shadow of their older brother. Both models are built using only high-quality materials and parts. And both share a number of technical features with the TD 309, ensuring that their replay quality is up there with the best.

The new TP 90 tonearm is based on the tried-and-tested TP 92 and uses the same ultra-low-friction, high-performance bearing and the innovative zero-stiction anti-bias system. The arm tube is made from rolled aluminium that is damped using RMR technology (reduced-modal-resonance), and the stainless-steel counterweight at the end of the arm tube is double-decoupled. Tonearm height, azimuth and overhang are useradjustable.

SPECIAL FEATURES
  • Low Noise, Low Voltage electronically speed controlled DC Motor
  • Adjustable belt tension for best performance
  • Two-part aluminium/acrylic platter
  • New TP 90 tonearm with precision Japanese bearings
  • Tonearm adjustable for VTA, azimuth and overhang
  • Made in Germany

A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from MDF. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction.  

The main chassis is made from lightweight, but very stiff particle board. Essential II utilises a straight 8,6" aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play" solution, than itʽs predecessor. Special feet effectively decouples the turntable from the surface.

Specifications:

  • speed : 33, 45 (manual speed change)

  • principle : belt drive

  • Speed variance : 33: 0,14% 45: 0,25%

  • Wow & flutter : 0,12%

  • platter : 300mm MDF with felt mat (0,8kg)

  • main bearing : stainless steel

  • tonearm : 8,6” aluminium

  • effective : arm length 218,5 mm

  • overhang : 22,0mm

  • effective tonearmmass : 8,0gr

  • counterweight for mass : 3 - 5,5g (included)

  • tracking force range : 0 - 25mn (OM5 18mn recommended)

  • included accessory : power supply, dust cover

  • Power consumption : 4,5 watts

  • dimensions : 420 x 112 x 330mm (WxHxD)

  • weight : 4,0 kg net

Weight5.00 kg6.50 kg5.00 kg10.50 kg6.00 kg5.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 5.00 kg
Weight 6.50 kg
Weight 5.00 kg
Weight 10.50 kg
Weight 6.00 kg
Weight 5.00 kg