REGA Planar 1 PLUS White Gloss Turntable

No longer available!

459.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Availability: No longer available! No longer available! SKU: PLANAR 1 PLUS WHITE Category:
We asked ourselves, how do we make the most successful turntable we have ever made sound better, be even easier to use and be more accessible to a wider audience?  The answer was simple; our engineers added a custom designed, high quality, moving magnet phono stage based around the multi-award winning What Hi-Fi? 5 Star Fono Mini.  For the Planar 1 Plus, we wanted to […]

 

Read more

We asked ourselves, how do we make the most successful turntable we have ever made sound better, be even easier to use and be more accessible to a wider audience?  The answer was simple; our engineers added a custom designed, high quality, moving magnet phono stage based around the multi-award winning What Hi-Fi? 5 Star Fono Mini. 

For the Planar 1 Plus, we wanted to optimise this circuit for ultimate performance so we have removed the USB interface and used the money saved to improve what was already a stunning disc stage. 

The new built in stage offers the ability to connect the Planar 1 Plus directly to almost any system that has a standard line input via a standard phono to phono cable (supplied) or phono to 3.5mm lead. Simply put, there is no need to purchase a standalone phono stage or use an amplifier with a built in stage. Your Planar 1 Plus will connect directly to any standard Line Level input (such as you would connect a CD player to).

There are obvious audio advantages to housing the phono stage directly beneath the tonearm. The carefully shielded tonearm wire is soldered directly to the stage which prevents any unwanted pick up via the usual external cable between the arm and stage.

The Planar 1 Plus benefits from all of the advantages of its sibling, the Planar 1, such as a low noise 24v motor, precision hub bearing assembly and hand made RB110 tonearm with a factory fitted Rega Carbon cartridge. Set-up remains possible in under 30 seconds making this the easiest to use, and most flexible Rega turntable to date.

Stick on your favourite LP, sit back and enjoy!

Key Features:

 

Built-in Phono Stage
The built-in phono stage is a high specification pre-amplifier. It is designed to amplify the signal from a moving magnet cartridge to a suitable level for all line level inputs of an appropriate system or audio amplifier. This allows simple connection to a wide variety of products using either the standard twin phono to phono lead (supplied) or phono to 3.5 mm plug (not supplied).

Tonearm
Brand new RB110 tonearm built with the new Rega designed, bespoke, zero play bearings with ultra-low friction performance (Patent Pending). New bias assembly and integrated arm clip. Includes automatic bias adjustment negating the need for the user to set bias, making this the most ‘Plug & Play’ turntable we have ever manufactured. New ergonomically, re-designed and stiffer headshell for improved usability and appearance.

Cartridge
Rega Carbon moving magnet cartridge supplied fitted as standard.

Motor
24v, synchronous AC motor with a new motor PCB and aluminium pulley offering low noise and better speed stability.

Plinth
Brand new Thermoset, gloss laminated plinth with vastly improved appearance and new ergonomically positioned on/off switch located on the underside. Two stunning plinth finishes available, gloss black and gloss white.

Central Bearing housing
Re-designed brass main bearing, offering improved fit and removing stress on the bearing itself while minimising the transfer of potential energy. (Patent pending)

Platter
23mm, high mass, phenolic platter with improved flywheel effect for improved speed stability.

Re-Designed feet
New improved feet to increase stability and reduce vibration transfer.

Motor cover tray
New motor cover tray with integrated cooling.

Balance Weight
New 111g ‘Plug and Play’ balance weight.

Use only with a Rega PS1 350 mA power supply.

50 Hz: 24 V AC 0.142 mA maximum power consumption 3.4 W.
60 Hz: 24 V AC 0.129 mA maximum power consumption 3.1 W.

Maximum Output Level (3.54 cm/s RMS 45 degrees CBS STR100 Band 6a and 7a): 370-410 mV

Output Impedance: 1 kΩ

Frequency Response (pre-amplifier only): 14 Hz (-3 dB Point) to 100 kHz (-0.6 dB Point)

RIAA Accuracy (pre-amplifier only): (100 Hz to 20 kHz) ± 0.4 dB typically better than ± 0.25 dB

Pre-amplifier Gain: 40 dB

Pre-amplifier Input Loading: 47 kΩ in parallel with 220 pF
Signal to Noise Ratio: -75 dB A-weighted ref maximum output.
Power Requirements: 50 Hz 24 V AC 0.142 mA 3.4 W – 60 Hz 24 V AC 0.129 mA 3.1 W

Dimensions (lid closed) H 11.7 x W 44.7 x D 36 cm

Weight 4.35kg

Weight 5.00 kg

Reviews

There are no reviews yet.

Be the first to review “REGA Planar 1 PLUS White Gloss Turntable”

Your email address will not be published. Required fields are marked *

Quick Comparison

REGA Planar 1 PLUS White Gloss Turntable removePro-Ject Elemental Turntable Red-Black with Ortofon OM 5 E removePro-Ject Debut Carbon DC OM10 Turntable Blue removeThorens TD 209 Turntable 45 rpm belt drive (black) removePro-Ject Elemental Turntable Silver-Black with Ortofon OM 5 E removePro-Ject Elemental Turntable White-Black with Ortofon OM 5 E remove
NameREGA Planar 1 PLUS White Gloss Turntable removePro-Ject Elemental Turntable Red-Black with Ortofon OM 5 E removePro-Ject Debut Carbon DC OM10 Turntable Blue removeThorens TD 209 Turntable 45 rpm belt drive (black) removePro-Ject Elemental Turntable Silver-Black with Ortofon OM 5 E removePro-Ject Elemental Turntable White-Black with Ortofon OM 5 E remove
Image
SKUPLANAR 1 PLUS WHITEELEMENTALRBDCOM10BLTD 209ELEMENTALSBELEMENTALWB
Rating
Price 459.00 incl. GR VAT268.99 incl. GR VAT449.00 incl. GR VAT1,065.00 incl. GR VAT 289.89 incl. GR VAT269.00 incl. GR VAT
Stock

Out of stock

Available on backorder

In stock

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

AvailabilityOut of stockAvailable on backorderIn stockAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

We asked ourselves, how do we make the most successful turntable we have ever made sound better, be even easier to use and be more accessible to a wider audience?  The answer was simple; our engineers added a custom designed, high quality, moving magnet phono stage based around the multi-award winning What Hi-Fi? 5 Star Fono Mini. 

For the Planar 1 Plus, we wanted to optimise this circuit for ultimate performance so we have removed the USB interface and used the money saved to improve what was already a stunning disc stage. 

The new built in stage offers the ability to connect the Planar 1 Plus directly to almost any system that has a standard line input via a standard phono to phono cable (supplied) or phono to 3.5mm lead. Simply put, there is no need to purchase a standalone phono stage or use an amplifier with a built in stage. Your Planar 1 Plus will connect directly to any standard Line Level input (such as you would connect a CD player to).

There are obvious audio advantages to housing the phono stage directly beneath the tonearm. The carefully shielded tonearm wire is soldered directly to the stage which prevents any unwanted pick up via the usual external cable between the arm and stage.

The Planar 1 Plus benefits from all of the advantages of its sibling, the Planar 1, such as a low noise 24v motor, precision hub bearing assembly and hand made RB110 tonearm with a factory fitted Rega Carbon cartridge. Set-up remains possible in under 30 seconds making this the easiest to use, and most flexible Rega turntable to date.

Stick on your favourite LP, sit back and enjoy!

Key Features:

 

Built-in Phono Stage
The built-in phono stage is a high specification pre-amplifier. It is designed to amplify the signal from a moving magnet cartridge to a suitable level for all line level inputs of an appropriate system or audio amplifier. This allows simple connection to a wide variety of products using either the standard twin phono to phono lead (supplied) or phono to 3.5 mm plug (not supplied).

Tonearm
Brand new RB110 tonearm built with the new Rega designed, bespoke, zero play bearings with ultra-low friction performance (Patent Pending). New bias assembly and integrated arm clip. Includes automatic bias adjustment negating the need for the user to set bias, making this the most ‘Plug & Play’ turntable we have ever manufactured. New ergonomically, re-designed and stiffer headshell for improved usability and appearance.

Cartridge
Rega Carbon moving magnet cartridge supplied fitted as standard.

Motor
24v, synchronous AC motor with a new motor PCB and aluminium pulley offering low noise and better speed stability.

Plinth
Brand new Thermoset, gloss laminated plinth with vastly improved appearance and new ergonomically positioned on/off switch located on the underside. Two stunning plinth finishes available, gloss black and gloss white.

Central Bearing housing
Re-designed brass main bearing, offering improved fit and removing stress on the bearing itself while minimising the transfer of potential energy. (Patent pending)

Platter
23mm, high mass, phenolic platter with improved flywheel effect for improved speed stability.

Re-Designed feet
New improved feet to increase stability and reduce vibration transfer.

Motor cover tray
New motor cover tray with integrated cooling.

Balance Weight
New 111g ‘Plug and Play’ balance weight.

Use only with a Rega PS1 350 mA power supply.

50 Hz: 24 V AC 0.142 mA maximum power consumption 3.4 W.
60 Hz: 24 V AC 0.129 mA maximum power consumption 3.1 W.

Maximum Output Level (3.54 cm/s RMS 45 degrees CBS STR100 Band 6a and 7a): 370-410 mV

Output Impedance: 1 kΩ

Frequency Response (pre-amplifier only): 14 Hz (-3 dB Point) to 100 kHz (-0.6 dB Point)

RIAA Accuracy (pre-amplifier only): (100 Hz to 20 kHz) ± 0.4 dB typically better than ± 0.25 dB

Pre-amplifier Gain: 40 dB

Pre-amplifier Input Loading: 47 kΩ in parallel with 220 pF
Signal to Noise Ratio: -75 dB A-weighted ref maximum output.
Power Requirements: 50 Hz 24 V AC 0.142 mA 3.4 W – 60 Hz 24 V AC 0.129 mA 3.1 W

Dimensions (lid closed) H 11.7 x W 44.7 x D 36 cm

Weight 4.35kg

Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight ultra low mass tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it in. The only plastic here is the stylus guard. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.
  •  Belt drive system with low vibration DC motor
  •  Central gravity mass point made from artificial stone
  •  Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom
  •  Low resonance MDF platter with felt mat
  •  8,6” ultra low mass tonearm with straight arm tube
  •  Pre-adjusted tracking force & antiskating
  •  Gold-plated RCA contacts & cartridge pins
  •  Colour options: red-black, white-black, silver-black
Specifications:
  • speed : 33, 45 (manual speed change)
  • Speed variance: 33: 0,2% 45: 0,18%
  • Wow & flutter: 33: 0,14% 45: 0,13%
  • platter: 300mm MDF
  • tonearm: 8,6” metal tube
  • effective arm length: 218,5 mm
  • overhang: 22,0 mm
  • effective tonearmmass: 8,0gr
  • counterweight for cartridge mass: 3 - 5,5g (included)
  • tracking force range: 0 - 30mn (OM5 18mn pre-adjusted)
  • output: RCA to phono input
  • included accessory: RCA cable, 15V DC power supply
  • power consumption: 4,0 watts
  • dimensions: 430 x 90 x 300mm (WxHxD)
  • weight: 2,7 kg net

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the "mass market” – something all music lovers could afford.  

The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  

The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  

This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  

The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option.

Specifications:

  •  8,6” carbon tonearm  

  •  Increased platter size with more weight  

  •  Precision belt drive with synchronous motor  

  •  New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.  

  •  New TPE motor suspension  

  •  Felt mat  

  •  magnetic cartridge options from Ortofon OM 10 or 2M red  

  •  7 high-gloss colours

Manual, Drive System belt-drive (flat belt around sub-platter), Speeds 33-1/3, 45 rpm, Tonearm THORENS TP 90, Pick-up Cartridge AT-95 B, Anti-skating (Bias) by magnet, Dimensions 470 x 125 x 430 mm (W x H x D), Weight 4.7 kg, power supply, RCA interconnects, stylus gauge, spirit level, cartridge alignment protractor

Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight ultra low mass tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it in. The only plastic here is the stylus guard. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.
  •  Belt drive system with low vibration DC motor
  •  Central gravity mass point made from artificial stone
  •  Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom
  •  Low resonance MDF platter with felt mat
  •  8,6” ultra low mass tonearm with straight arm tube
  •  Pre-adjusted tracking force & antiskating
  •  Gold-plated RCA contacts & cartridge pins
  •  Colour options: red-black, white-black, silver-black
Specifications:
  • speed : 33, 45 (manual speed change)
  • Speed variance: 33: 0,2% 45: 0,18%
  • Wow & flutter: 33: 0,14% 45: 0,13%
  • platter: 300mm MDF
  • tonearm: 8,6” metal tube
  • effective arm length: 218,5 mm
  • overhang: 22,0 mm
  • effective tonearmmass: 8,0gr
  • counterweight for cartridge mass: 3 - 5,5g (included)
  • tracking force range: 0 - 30mn (OM5 18mn pre-adjusted)
  • output: RCA to phono input
  • included accessory: RCA cable, 15V DC power supply
  • power consumption: 4,0 watts
  • dimensions: 430 x 90 x 300mm (WxHxD)
  • weight: 2,7 kg net

Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight ultra low mass tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it in.  

The only plastic here is the stylus guard. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.

The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards. 

  •  Belt drive system with low vibration DC motor  

  •  Central gravity mass point made from artificial stone  

  •  Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom  

  •  Low resonance MDF platter with felt mat  

  •  8,6” ultra low mass tonearm with straight arm tube  

  •  Pre-adjusted tracking force & antiskating  

  •  Gold-plated RCA contacts & cartridge pins  

  •  Colour options: red-black, white-black, silver-black 

Specifications:

  • speed : 33, 45 (manual speed change)

  • Speed variance: 33: 0,2% 45: 0,18%

  • Wow & flutter: 33: 0,14% 45: 0,13%

  • platter: 300mm MDF

  • tonearm: 8,6” metal tube

  • effective arm length: 218,5 mm

  • overhang: 22,0 mm

  • effective tonearmmass: 8,0gr

  • counterweight for cartridge mass: 3 - 5,5g (included)

  • tracking force range: 0 - 30mn (OM5 18mn pre-adjusted)

  • output: RCA to phono input

  • included accessory: RCA cable, 15V DC power supply

  • power consumption: 4,0 watts

  • dimensions: 430 x 90 x 300mm (WxHxD)

  • weight: 2,7 kg net

Weight5.00 kg3.50 kg6.50 kg5.00 kg3.50 kg3.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 5.00 kg
Weight 3.50 kg
Weight 6.50 kg
Weight 5.00 kg
Weight 3.50 kg
Weight 3.50 kg