| Content |
Hand built MONO moving magnet cartridge in our custom body designed specifically for 78rpm record playback.
The RB78 is a general purpose mono cartridge designed to play most 78 rpm records.
- Output: 6.8 - 7.2mV
- Stylus: 78 profile
- Fixing: Standard, two screws
- Coils: High spec parallel wound coils
- Colour: Black
- Tracking Pressure 1.75g
|
A revolutionary new high performance cart for DJs! Exceptional tracking ability of 120 μm!
The Ortofon-Serato S-120 represents a completely new way of constructing and designing cartridges. Its breakthrough patent pending technology has been designed to provide maximum freedom for DJ performance.
An innovative technology, called asymmetric suspension, takes the cartridge performance to the next level.
Its superior tracking force ensures the S-120 stays in the groove even under extreme live performance conditions.
In addition, its design achieves an unprecedentedly low level of record wear, which helps protect your valuable vinyl. On top of this, the S-120 is capable of providing a level of sound quality never thought possible from a modern DJ cartridge.
|
Output voltage at 1000Hz, 5cm/sec.
|
10 mV
| |
Channel balance at 1kHz
|
1,5 dB
| |
Channel separation at 1kHz
|
20 dB
| |
Channel separation at 15 kHz
|
15 dB
| |
Frequency range at -3dB
|
20-18.000 Hz
| |
Frequency response
|
20-18.000 Hz +3/- 2dB
| |
FIM distortion at recommended tracking force DIN 45.542
| | |
Tracking ability at 315 Hz at recommended tracking force
|
120 μm
| |
Compliance, dynamic lateral
|
11 μm/m N
| |
Stylus type
|
Spherical
| |
Stylus tip radius
|
R 18 μm
| |
Tracking force range
|
1,5-10,0 g (15-100 mN)
| |
Tracking force recommended
|
4,0 g (40 mN)
| |
Internal impedance, DC resistance
|
1680 Ohm
| |
Internal inductance
|
920 mH
| |
Recommended load resistance
|
47 kOhm
| |
Recommended load capacitance
|
200-600 pF
| |
Cartridge weight
|
5 g
| |
Replacement stylus unit
| Ortofon-Serato S-120 |
|
For DJs that require increased tracking ability, the Scratch is up to the task. Featuring a reinforced rubber suspension, DJs need not worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.
|
Output voltage at 1000Hz, 5cm/sec.
|
7 mV
|
|
Channel balance at 1kHz
|
1,5 dB
|
|
Channel separation at 1kHz
|
25 dB
|
|
Channel separation at 15 kHz
|
15 dB
|
|
Frequency range at -3dB
|
20-20.000 Hz
|
|
Frequency response
|
20-15.000 Hz 3dB/-2dB
|
|
Tracking ability at 315 Hz at recommmende tracking force
|
80 μm
|
|
Compliance, dynamic lateral
|
6 μm/m N
|
|
Stylus type
|
Spherical
|
|
Stylus tip radius
|
R 18 μm
|
|
Tracking force range
|
3,0-5,0 g (30-50 mN)
|
|
Tracking force recommended
|
4,0 g (40 mN)
|
|
Tracking angle
|
20°
|
|
Internal impedance, DC resistance
|
750 Ohm
|
|
Internal inductance
|
450 mH
|
|
Recommended load resistance
|
47 kOhm
|
|
Recommended load capacitance
|
200-600 pF
|
|
Cartridge weight
|
5 g
|
|
Replacement stylus unit
|
scratch
|
| A budget cartridge that out performs a lot of other top-of-the-line models.
No need to go broke to get an affordable, tough-as-nails scratching tool.
Technical Data:
- Output voltage at 1000 Hz, 5cm/sec: 5 mV
- Channel balance at 1 kHz: 2 dB
- Channel separation at 1 kHz: 20 dB
- Channel separation at 15 kHz: 15 dB
- Frequency range at - 3dB: 20-20.000 Hz
- Frequency response: 20-18.000 Hz + 3 / - 2 dB
- FIM distortion at recommended
tracking force, DIN 45.542:
- Tracking ability at 315Hz at
recommended tracking force: 70 µm
- Compliance, dynamic, lateral: 7 µm/mN
- Stylus type: Spherical
- Stylus tip radius: R 26 µm
- Equivalent stylus tip mass: 0,5 mg
- Tracking force range: 3,0-5,0 g (30-50 mN)
- Tracking force, recommended: 4,0 g (40 mN)
- Tracking angle: 20°
- Internal impedance, DC resistance: 750 Ohm
- Internal inductance: 450 mH
- Recommended load resistance: 47 kOhm
- Recommended load capacitance: 200-600 pF
- Cartridge colour: Black
- Cartridge weight: 5 g
- Replacement stylus unit: PRO S
| The MC 3 Turbo takes high output moving coil (MC) cartridges a step further, with a high polished, nude fine line diamond. The MC 3 Turbo has a 3.3mV output, which is perfect for use with virtually any moving magnet (MM) phono preamps, included inbuilt models. The nude fine line diamond resolves a high level of detail and provides expansive stereo imaging.
| Technical data |
|
| Output voltage at 1000 Hz, 5cm/sec. |
3,3 mV |
| Channel balance at 1 kHz |
|
| Channel separation at 1 kHz |
> 24 dB |
| Channel separation at 15 kHz |
>15 dB |
| Frequency range at - 3dB |
20-30.000 Hz |
| Frequency response FIM distortion at recommended |
20-20.000 Hz + 4 / - 1 dB |
| Tracking ability at 315Hz at recommended tracking force *) |
> 70 µm |
| Compliance, dynamic, lateral |
13 µm/mN |
| Stylus type |
Nude Fine Line |
| Stylus tip radius |
r/R 8/40 µm |
| Tracking force range |
1,8-2,2 g (18-22 mN) |
| Tracking force, recommended |
2 g (20 mN) |
| Tracking angle |
20° |
| Internal impedance, DC resistance |
100 Ohm |
| Recommended load impedance |
47 kOhm / |
| Cartridge body material |
Noryl |
| Cartridge colour |
Black |
| Cartridge weight |
4,1 g |
| EVERYTHING YOU NEED IN A CARTRIDGE, NOTHING YOU DONʼT
* Adjustable cartridge which will fit in a traditional headshell mount
* Replaceable diamond tip |
Reviews
There are no reviews yet.