Content |
- For RMX Innofader Compatible Mixers
- Non-Contact Crossfader
- Rated for 4 Million Movement Cycles
- Ultra-Precise Default Calibration
- Custom Set Cut-In and Cut-Out Points
- Precision Adjustments on Both Sides
- Smooth Tension for Precise Scratching
- Works with RMX-22i, 33i, 60, 80 Mixers
- Includes 3-Pin Adapter Cable for Reloop Mixers
- Blue Fader Cap Included
The RMX Innofader from Reloop is a contact-less crossfader designed for RMX Innofader compatible mixers including the RMX-80, RMX-60, RMX-22i, and RMX-33i. The fader shaft is grounded to protect the integrity of the audio signal and is rated for 4 million movement cycles. Designed to quickly install into the RMX-series mixers, the included 3-pin adapter cable make the fader compatible with other mixers. The factory calibrated fader is ready for immediate use, but also has the ability to set customized cut-in and cut-out points. The RMX Innofader ships with a blue fader cap.
- Revolutionary non-contact fader
- Designed to last more than 4 million cycles
- Quick mounting
- Cut-in and cut-out points can be calibrated
- Smooth operating tension for perfect scratching
- Ultra-precise default calibration
- 3-pin and 4-pin compatible (adapter cable included)
- Fader shaft with brush grounding for even more reliable applications
- Precision adjustment in steps of 0.006" / 0.150 mm on both sides
- Compatible with Reloop RMX-60/80 and RMX-22i/33i mixers
- Blue fader cap included
Dimensions (L x W x H) |
2.8 x 0.6 x 0.7" / 7.2 x 1.5 x 1.7 cm |
Weight |
0.9 oz / 26.0 g |
|
FADER B30 KOHM STEREO ALPHA FOR channel and master , for mixer
RESISTANCE : 30 KΒ Χ2- B30Kx2 - 30KBx2
LENGTH out : 87 mm
LENGTH route : 72 mm
SHAFT LENGTH: 12 mm
87 mm x 16mm x 9mm | AFTERMARKET CAP4Y KNOB CAP FOR FADER 4ΜΜ YELLOW
Size:
Long 23.5mm
Wide 11.5mm
High 11mm
HOLE 4mm |
FADER B100 KOHM STEREO(DUAL) ALPHA FOR BEHRINGER.
SUITABLE REPLACEMENT FOR MIXER MODEL:
DX052 - DX626 - DJX400 - DJX700 - VMX100 - VMX200 - VMX300 - DDM2000 - DDM4000
RESISTANCE : 100 KΒΧ2
LENGTH out : 73 mm
LENGTH route : 45 mm
PCB mountings: 67.5 mm
SHAFT LENGTH: 15 mm
SHAFT TIP : 4 mm
73 mm x 16mm x 9mm
This fader is a replacement spare part suitable replacement for the CROSSFADER on the above models. This fader is a standard and very commonly used fader and will also fit many other mixers from other manufacturers like, American Audio, Citronic, Kam, Numark, Phonic, Sound-lab, Vestax, Vision, etc.
| Slide Pot, Pitch Fader, CDN25/33/25+G/30/35/HDCD1
Numark HDCD1 CDN25 CDN25+G CDN30 CDN35 CDN55 Pitch Slide Pot
Original Numark Replacement Pitch Slide Pot
Fits following units:
- HDCD1
- CDN25
- CDN25+G
- CDN30
- CDN35
- CDN55
Numark part number: VRS10306002
Value: 10KBM2
RESISTANCE : 10 KΒM2
LENGTH out : 60 mm
LENGTH route : mm
PCB mountings: mm
SHAFT LENGTH: 20 mm
SHAFT TIP : 4 mm
60 mm x 26.5mm x 8mm
| PIONEER DAA 1205 Button Effect / Channel Select for DJM800
- DJM-V10
- XDJ-XZ
- XDJ-RX2
- DDJ-1000
- DDJ-1000SRT
- DJM-800
- DJM-900
- DJM-900NXS2
- DJM-750MK2
- DJM-850
- DJM-750
- DJM-700
Pioneer DJM-800 DDJ-1000 DJM-900 NXS2 DJM-750 MK2 DJM-900 DJM-850 DJM-750 DJM-700 XDJ-XZ DDJ-1000SRT |
Reviews
There are no reviews yet.