RELOOP DOMINANCE 702 MK2 Amplifier 2 x 120W 8ohm

209.00 incl. GR VAT

Only 1 left in stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
New front panel design Heavy duty aerator Novel transistors Large, oversized cooling fins Overload protection and short-circuit protection High reliability Thermal protective circuit Separate amplifier circuits for channel A and B Bridged mono operation Ground/lift switch against background noises Aluminium cooling tunnel 360 watt pro final amplifier Frequency range: 20 Hz – 20 kHz Inputs: […]

 

Read more

  • New front panel design
  • Heavy duty aerator
  • Novel transistors
  • Large, oversized cooling fins
  • Overload protection and short-circuit protection
  • High reliability
  • Thermal protective circuit
  • Separate amplifier circuits for channel A and B
  • Bridged mono operation
  • Ground/lift switch against background noises
  • Aluminium cooling tunnel
  • 360 watt pro final amplifier
  • Frequency range: 20 Hz – 20 kHz
  • Inputs: XLR, RCA
  • Outputs: PA speaker cord pro, screw clamps
  • Output rating: 2x 180 W at 4 ohm, 2x 120 W at 8 ohm
  • Dimensions: 483 x 88 x 350 mm
  • Weight: 8.5 kg
Weight 9.00 kg
Ohm

,

Reviews

There are no reviews yet.

Be the first to review “RELOOP DOMINANCE 702 MK2 Amplifier 2 x 120W 8ohm”

Your email address will not be published. Required fields are marked *

Quick Comparison

RELOOP DOMINANCE 702 MK2 Amplifier 2 x 120W 8ohm removePHONIC MAX-1500 PLUS v.10 Power Amplifier 2x450W removeDYNACORD SL-1200 / 230V 1200 Watts 8Ω removeRCF ED 600: 600 W, 2 IN, EXTENDED DYNAMIC STEREO POWER AMPLIFIERS removeYAMAHA PC-2001N Power Amplifier 2x250W removeDYNACORD SL-900 / 230V Power Amplifier 900 Watts 8Ω remove
NameRELOOP DOMINANCE 702 MK2 Amplifier 2 x 120W 8ohm removePHONIC MAX-1500 PLUS v.10 Power Amplifier 2x450W removeDYNACORD SL-1200 / 230V 1200 Watts 8Ω removeRCF ED 600: 600 W, 2 IN, EXTENDED DYNAMIC STEREO POWER AMPLIFIERS removeYAMAHA PC-2001N Power Amplifier 2x250W removeDYNACORD SL-900 / 230V Power Amplifier 900 Watts 8Ω remove
Image
SKU040051H06PH00016E009274ED600H060.00037E009273
Rating
Price 209.00 incl. GR VAT 350.00 incl. GR VAT 830.00 incl. GR VAT 585.89 incl. GR VAT 1,444.00 incl. GR VAT 710.00 incl. GR VAT
Stock

Only 1 left in stock

In stock

In stock

Available on backorder

Available on backorder

In stock

AvailabilityOnly 1 left in stockIn stockIn stockAvailable on backorderAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • New front panel design
  • Heavy duty aerator
  • Novel transistors
  • Large, oversized cooling fins
  • Overload protection and short-circuit protection
  • High reliability
  • Thermal protective circuit
  • Separate amplifier circuits for channel A and B
  • Bridged mono operation
  • Ground/lift switch against background noises
  • Aluminium cooling tunnel
  • 360 watt pro final amplifier
  • Frequency range: 20 Hz - 20 kHz
  • Inputs: XLR, RCA
  • Outputs: PA speaker cord pro, screw clamps
  • Output rating: 2x 180 W at 4 ohm, 2x 120 W at 8 ohm
  • Dimensions: 483 x 88 x 350 mm
  • Weight: 8.5 kg
Phonic's MAX 1500 Power Amplifier provides 900 Watts of power at 8 ohms (bridge mono) or 450 Watts at 4 ohms (stereo) - ideal for clubs, churches, auditoriums and more. Input to the MAX 1500 amp is achieved via XLR or phone jack, and output is achieved either through Speakon-type connectors or traditional binding posts. The MAX 1500 features ground switches, user defeatable clip limiters, selectable high pass filters, and the option to choose between stereo, parallel and bridge operating modes, making this amplifier ideal for real world application.
  • Output power: 450W @ 4 Ohms stereo, 280W @ 8 Ohms stereo
  • High-current toroidal transformers for greater power and low noise
  • Independent user-defeatable peak limiters reduce distortion
  • Selectable High-Pass filter at 30Hz or 50Hz
  • XLR and 1/4' TRS input jacks
  • Binding post and Speakon?-type outputs
  • Front mounted gain controls for easy access
  • Signal and Peak LED indicators to monitor performance
  • Short circuit, thermal, subsonic, RF protection, output DC offset
  • Power on/off muting

Solid DYNACORD amplifier technology at highly competitive prices.
These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.
The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.
Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel 2 Ω - 900 W, 4 Ω - 600 W, 8 Ω - 380 W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A 2 Ω - 1700 W, 4 Ω - 950 W, 8 Ω - 480 W Maximum Bridged Output Power, THD = 1%, 1 kHz 4 Ω - 1800 W, 8 Ω - 1200 W Input Sensitivity, rated power @ 8 Ω, 1 kHz +3.1 dBu (1.11 Vrms) Maximum Input Level +21 dBu (8.69 Vrms) Voltage Gain, ref. 1 kHz 32.0 dB Frequency Response, ref. 1 kHz 10 Hz...40 kHz (±1 dB) Output Stage Topology Class AB Dimensions (W x H x D), mm 483 x 88.1 x 421.5 Weight 14.8 kg (32.6 lbs)

The high efficiency of the ED series enables maximum efficiency with low heat generation.

A new and unique Class-H circuity technology using state of the art SMD Surface Mount Technology with a reduced number of components offering performance levels exceeding audiophile levels like a slew rate of 50V/µs and high-end extended dynamic sound. The amplifier provides 2x300W into 4 Ohm is equipped complete with temperature-controlled fan cooling, all common protective circuits such as over-temperature, short circuit, RFI and soft start.
The integral soft clip limiter protects against damage to the connected loudspeakers, the activity of a protective circuit, signal and limiter are shown for each channel by LEDʼs.

AMPLIFIER SPECIFICATIONS
Power output stereo 4Ω:2 x 300 Watt rms 
Power output stereo 8Ω:2 x 180 Watt rms 
Power output bridged 8Ω:600 Watt rms 
Frequency Response:20 Hz ÷ 20 kHz  
Signal/noise rate:> 105 dB 
Crosstalk:> 70 dB 
Distortion (THD+N): 
Intermodulation: 
Damping factor:200:1 (8 Ω) 
Slew rate:50 V/μS 
INPUT SECTION
Input connector:2 x XLR balanced, 6,3mm jack unbalanced 
Input sensitivity:0 / 0.775 dBm/V RMS 
Input impedance: 10.000 kΩ 
Controls:Volume control for each channel 
OUTPUT SECTION
Output connector:2 x Neutrik Speakon 4 ways 
SYSTEM PARAMETERS
Cooling:Two-speed fan 
Protections:Temperature, DC, RFI short circuit, Soft-Start thermal on transformer 
Amplifier class:H 
POWER REQUIREMENT
Operating voltage:220÷240 / 110÷120 ~ 50 / 60 V ~ Hz  
Max.current:6 A 
Power Consumption:1300 W 
PHYSICAL SPECIFICATIONS
Height:88 / 3.46 mm/inch 
Width:483 / 19.01 mm/inch 
Depth:350 / 13.77 mm/inch 
Net Weight:11.45 / 25.24 Kg/Lbs 
SHIPPING INFORMATION
Package height:120 / 4.72 mm/inch 
Package width:540 / 21.25 mm/inch 
Package depth:470 / 18.05 mm/inch 
Shipping Weight:13.81 / 30.44 Kg/Lbs

 

A full model revision takes Yamaha's high-end PC-N power amplifiers to the next level - the PC-1N Series. The new PC-1N Series amplifiers feature an extraordinarily solid low end, rich midrange, and superbly defined highs. They also deliver fast response and exceptional stability even in the face of serious power supply limitations. Refinements throughout this expanded five-model lineup make these amplifiers the new benchmarks for quality, reliability, and versatility in professional applications. Frequency Response: 10 Hz – 40 KHz. Output Power: 2 x 250 Watt / 8Ω RMS, 2 x 450 Watt / 4Ω RMS, 900 Watt / 8Ω bridge RMS. Weight: 12,5 Kg.

These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.
The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.

Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel 2 Ω - 650 W, 4 Ω - 450 W, 8 Ω - 270 W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A 2 Ω - 1150 W, 4 Ω - 660 W, 8 Ω - 350 W Maximum Bridged Output Power, THD = 1%, 1 kHz 4 Ω - 1300 W, 8 Ω - 900 W Input Sensitivity, rated power @ 8 Ω, 1 kHz + 2,2 dBu (1,0 Vrms) Maximum Input Level +21 dBu (8.69 Vrms) Voltage Gain, ref. 1 kHz 32.0 dB Frequency Response, ref. 1 kHz 10 Hz...40 kHz (±1 dB) Output Stage Topology Class AB Dimensions (W x H x D), mm 483 x 88.1 x 421.5 Weight 12.6 kg (27.8 lbs)

Weight9.00 kg16.00 kg14.80 kg13.81 kg12.50 kg12.60 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 9.00 kg
Ohm

,

Weight 16.00 kg
Weight 14.80 kg
Weight 13.81 kg
Weight 12.50 kg
Weight 12.60 kg