Heavy duty aerator Novel transistors Large, oversized cooling fins Overload protection and short-circuit protection High reliability Thermal protective circuit Separate amplifier circuits for channel A and B Ground/lift switch against background noises Aluminium cooling tunnel Outputs: PA speaker cord pro, screw clamps Inputs: XLR, RCA 720 watt pro final amplifier Output rating: 2x 360 W […]
Output rating: 2x 360 W at 4 ohm, 2x 240 W at 8 ohm
frequency range: 20 Hz - 20 kHz
Dimensions: 483 x 88 x 350 mm
Weight: 10 kg
L1400 450W-450W 4ohm (280W-280W8ohm)
COMPACT MODERN DESIGN
Compact size (2U-Rack Height) with up to 1200W per channel@2ohms
these amps save valuable rack space without compromising power output.
HIGH CURRENT TOROIDAL TRANSFORMER
A high-current toroidal transformer saves rack space
and minimizes hum and noise.
EXCELLENT SOUND QUALITY
The low T.H.D.(0.05%) and high damping factor (400 or higher)
gives excellent sound quality.
2 STAGE POWER SUPPLY
The high-power units (L1800 and L2400) have a 2-Stage Class-H design
that maximizes their performance.
EQUIPPED WITH 30Hz or 50Hz HPF
All amplifiers are equipped with high-pass filters on each channel to
help maintain sound quality, yet help protect the loudspeakers.
EXTENSIVE PROTECTION CIRCUITS
Extensive protection circuits monitor over voltage/current conditions, overheating,
output shorts, and DC voltage to improve performance and reliability.
CLIP-LIMITER CIRCUITS
Clip-limiters on each channel are provided to help prevent
distortion due to excessive signal levels.
L.E.D FUNCTION DISPLAYS
Power, Clip limiter, Signal, Protection, Mode (Parallel/Stereo/Bridged)
LEDs on the front panel indicate the status of the unit in operation.
HPS 1500 is a 2 channel power amplifier that delivers up to 2 x 750 W RMS @ 4 Ω (1500 W RMS bridged @ 8 Ω).
XLR inputs for patching in signals as well as Speakon ports for connecting speaker systems are provided for the maximum flexibility.
A forced air cooling system maintains a low operating temperature.
Features
Fast response and low distortion
Easy to configure in stereo / mono / bridge modes
Extensive protective circuits ensure high reliability and operating safety
Front panel signal / clip / protect LED indicators
Minimum load impedance (stereo / mono): 4 Ohm
XLR input connectors
SPEAKON output connectors
Switchable limiter
2 unit 19" rack, low weight for easy transportation
AMPLIFIER SPECIFICATIONS
Power output stereo 4Ω:
2 x 750 Watt rms
Power output stereo 8Ω:
2 x 450 Watt rms
Power output bridged 8Ω:
1500 Watt rms
Frequency Response:
20 Hz ÷ 20 kHz
Signal/noise rate:
106 dB
Damping factor:
> 300
Slew rate:
50 V/μS
INPUT SECTION
Input connector:
xlr
Input sensitivity:
1.4 V (/ 32 – 26 dB) dBm/V RMS
Input impedance:
20 kΩ (balanced), 10 kΩ (unbalanced) kΩ
OUTPUT SECTION
Output connector:
Speakon
SYSTEM PARAMETERS
Cooling:
Forced
Amplifier class:
H
POWER REQUIREMENT
Operating voltage:
220 ÷ 240 V (50 / 60 Hz) V ~ Hz
PHYSICAL SPECIFICATIONS
Height:
88/3.4 mm/inch
Width:
482/18.9 mm/inch
Depth:
420/16.5 mm/inch
Net Weight:
17/37.4 Kg/Lbs
Solid DYNACORD technology for fixed installations at very competitive prices. DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, also a switchable high-pass filter (50 Hz, 18 dB/oct) and a Ground Lift switch. The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
<br>
- Frequency Response: (+/-01db, @rated output Power, 8 Ohms): 20Hz - 20K Hz<br>
- Slew Rate: 15V Per usec<br>
- Damping Factor: @ 8 Ohm: 300<br>
- Impedance: 20 Ohms balanced / 10 Ohms unbalanced<br>
- Cooling System: 2 individual fans<br>
- Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift; Limiter<br>
- build in clip limiter<br>
- Input: XLR 3pin + Jack 6,3mm<br>
- output: Speakon + Binding post<br>
- Dimensions (LxWxH): 360 x 482 x 88mm 2-rack mount spaces<br>
- Weight: 15 KG. <br></p></td><td>
<p>
These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.<br>
The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.
</p>
<p>
Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel 2 Ω - 650 W, 4 Ω - 450 W, 8 Ω - 270 W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A 2 Ω - 1150 W, 4 Ω - 660 W, 8 Ω - 350 W Maximum Bridged Output Power, THD = 1%, 1 kHz 4 Ω - 1300 W, 8 Ω - 900 W Input Sensitivity, rated power @ 8 Ω, 1 kHz + 2,2 dBu (1,0 Vrms) Maximum Input Level +21 dBu (8.69 Vrms) Voltage Gain, ref. 1 kHz 32.0 dB Frequency Response, ref. 1 kHz 10 Hz...40 kHz (±1 dB) Output Stage Topology Class AB Dimensions (W x H x D), mm 483 x 88.1 x 421.5 Weight 12.6 kg (27.8 lbs) <br>
</p></td></tr><tr class= "acrobat_reader_logo."){kind=logo}
Reviews
There are no reviews yet.