| Content | -Newly developed top panel and reinforced housing construction
-Reworked metallic buttons with improved feel & tactile response
-USB audio output for digitizing your records easily
- Newly developed top panel and reinforced housing construction
- Reworked metallic buttons with improved feel & tactile response
- Precision Pitch with selectable ranges of +/-8 %
- Superior finish in deep black metallic
- Quartz-driven DJ turntable with direct drive
- Perfect for beginners
- USB audio output for digitizing your records easily
- Precise motor control with 2 speeds selectable (33 1/3 & 45 rpm)
- Precision-engineered, die-cast aluminium platter with stable rotation
- Statically balanced s-shaped tone arm with hydraulic lift and anti-skating - mechanism
- Universal connection for pick-up systems (SME)
- Extendible needle illumination
- Built-in phono pre-amplifier (no grounding necessary)
- Switchable phono and line level output
- Shock-absorbing feet for vibration isolation
- Sturdy, heavy construction with optimized damping features
Turntable:
- Type: direct drive turntable
- Drive: quartz-driven direct drive
- Motor: 8-pol., 2-phase, brushless DC motor
- Turntable speeds: 2 speeds, manual (33 1/3, 45 RPM)
- Starting torque: > 1kg/cm
- Brake time: < 1 sec.
- Start-up / rpm change: < 1 sec.
Platter:
- Material: aluminium die-cast
- Diameter: 332 mm
Connections:
- 1x PHONO/LINE out (gold-plated)
Accessories included:
- Platter, OM Black pick-up system (by Ortofon), headshell, slipmat, counterweight, power cord,
operating instruction manual
|
ORTOFON TA-210 TONERAM
The Ortofon TA-210 tonearm has gone to the next level by reducing unwanted vibrations in the tonearm. TA-210 armtube is a lot less stressed than conventional armtubes due to the Technical rubber and TPE excellent damping properties.
FEATURES:
• TA-210 is a static balanced gimbal type arm, easy to use and adjust for optimal VTF settings
• TA-210 has a standard 5-pin DIN connector for tonearm cable
• The tonearm geometry allows for a Baerwald alignment (also the IEC recommendations)
• Counterweight with Inner/outer scale
- Inner scale to be applied with main counterweight
- Outer scale to be applied when extra mass ring is added
• Counterweight will work with headshell+cartridge mass approximately in the range 20 to 28g
• TA-210 is fitted with a standard headshell connector and can easily be adjusted in accordance with the included mounting template
• Extra mass ring, weight 45 g, for heavier cartridge and headshell combinations included (the extra mass ring may need to be attached to achieve proper tracking force)
TECHNICAL DATA:
• Effective mass without headshell: 5 g
• Effective armlength (distance between the stylus and pivot point): 329.0 mm
• Mounting distance (distance between the pivot point and turntable center): 316.6 mm
• Offset angle: 16.5 degrees
• Overhang: 12.4 mm
• Tracking force adjusting range (direct reading): 0-3/0-4 g
• Height adjustment range: 35-55 mm
• Diameter of the armbase mounting hole: 19-20 mm
• Diameter of the center shaft of tonearm: 18.0 mm
• Inner null point: 66 mm
• Outer null point: 120.9 mm
• Counterweight for cartridge + headshell mass between 21 and 28g included
• Headshell LH-2000E included
• Headshell weight: 15.5 g
• TA-210 total weight including headshell: 536 g
• Set of tonearm cables 6NX-TSW-1010 included
| Audio-Technica AT-LP140XP BL, Direct Drive Turntable, professional turntable, manual, high-performance direct drive motor, anti-resonance / shock mount die-cast aluminium platter, selectable 33/45/78 RPM speeds, S-shaped tonearm with hydraulically damped lift control, height adjustment, and lockable rest, forward / reverse operation and variable pitch control with quartz speed lock, adjustable pitch range: +/-8 %, +/-16 %, +/- 24 %, stroboscopic platter with speed indicator, popup stylus target light, accessories Included: AT-XP3 phono cartridge, AT-HS6 headshell, dual RCA (male) to dual RCA (male) cable with ground wire, counterweight, felt mat, dust cover, 45 RPM adapter, plug-type stylus target light, colour: black
- Experience high-fidelity audio and professional DJ performance
- Direct-drive, high-torque motor
- Fully manual operation
- Adjustable dynamic anti-skate control
- Professional anti-resonance, mass-damped, die-cast aluminium platter
- Including AT-XP3 cartridge with AT-HS6 universal half inch-mount headshell
The AT-LP140XP fully manual professional DJ turntable features a high-torque direct-drive motor and anti-resonant, mass-damped, die-cast aluminium platter to ensure stable, on-axis rotation at 33-1/3, 45, and 78 RPM. It is equipped with an S-shaped tonearm with height adjustment, adjustable tracking force (counterweight) and adjustable dynamic anti-skate control.
Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the durable, high-output AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus included with the turntable. It comes pre-mounted to an AT-HS6 universal ½“-mount headshell.
Designed to connect to components with a dedicated phono input, the turntable comes with a detachable dual RCA output cable which supplies a strong 5.5 mV phono output.
Additional professional features include a start/stop button; forward and reverse play; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8%, +/-16%, and +/-24% adjustment ranges; a stroboscopic platter with speed indicator; a retractable plug-type stylus target light; and a removable hinged dust cover.
- Experience high-fidelity audio and professional DJ performance
- Direct-drive, high-torque servo motor with speed stabilization
- Fully manual operation
- Adjustable dynamic anti-skate control
- Selectable 33/45/78 RPM speeds
- Professional anti-resonance, mass-damped, die-cast aluminium platter with felt mat
- AT-HS6 universal ½“-mount headshell and AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus
- Balanced S-shaped tonearm with hydraulically damped lift control, height adjustment, and lockable rest
- Dedicated phono-level output (5.5 mV)
- Stroboscopic platter with speed indicator
- Forward/reverse operation and variable pitch control with quartz speed lock
- Retractable plug-type target light for easier cueing in low light
- Damped base construction for reduced low-frequency feedback coloration
- Includes: detachable RCA output cable (dual RCA male to dual RCA male), power cable, 45 RPM adapter, counterweight, felt mat, and removable hinged dust cover.
| Cartridge & Stylus |
| Model |
AT-XP3 |
| Type |
VM Dual Magnet |
| Output Voltage |
5.5 mV (@ 1.0 kHz, 5cm/sec) |
| Vertical Tracking Force Range |
2.0 to 4.0 g (standard 3.0 g) |
| Stylus Shape |
Conical |
| Stylus Size |
0.6 mil |
| Recommended Load Impedance |
47,000 ohms |
| Weight |
6.2 g |
| Headshell |
| Model |
AT-HS6 |
| Weight |
9 g |
| Tone arm |
| Type |
Balanced S-shaped tonearm with detachable headshell |
| Effective Length |
230.5mm |
| Overhang |
16mm |
| Maximum Tracking Error Angle |
Less than 3 degree |
| Applicable Cartridge Weight |
3.5 - 8.5 g |
| Anti-skating Range |
0-4 g |
| Turntable |
| Drive Method |
Direct drive |
| Type |
3-speed, fully manual operation |
| Motor |
High-torque DC motor |
| Speeds |
33-1/3 RPM, 45 RPM, 78 RPM |
| Pitch Variation |
+/-8% or +/-16% or +/-24% |
| Turntable Platter |
Die-cast aluminium |
| Starting Torque |
2.2 kgf-cm |
| Wow and Flutter |
50 dB |
| Output Level |
5.5 mV nominal at 1 kHz, 5 cm/sec |
| Power Supply Requirements |
115/230V AC, 60/50 Hz |
| Power Consumption |
4.3 W |
| Weight |
10.0 kg |
| The directly driven Technics SL-1210GR has an extremely high quality core and brushless motor for a vibration-free drive. The Technics SL-1210GR becomes a real heavyweight thanks to the superbly crafted 2-layer sandwich chassis and the heavy-duty aluminium die-casting plate, which is rubber-coated inside for resonance damping. High-quality RCA sockets and a connection for the power cord make the hearts of HiFi fans beat faster.
The high-end turntable is equipped with the medium-heavy, S-shaped aluminium arm - including removable headshell with SME connection. The tonearm is light and easily height-adjustable.
Extreme robustness, fast start-up times and the easy assembly of different pickups are still the hallmarks of Technics turntables today. Older records are also reproduced in an impressive width.
A beautifully designed bonnet with the legendary arch over the tonearm is also included.
Features Technics SL-1210 GR
- Technology for high rotational stability
- Ironless direct drive motor
- High precision motor control
- Vibration tolerant construction
- Vibration absorbing platter plate
- Robust housing construction
- Silicone rubber cushioning feet
- High quality components
- Highly sensitive tone arm
- Gold plated connectors
TECHNOLOGY FOR ROTATIONAL STABILITY
- Coreless Direct Drive Motor
- High-Precision Motor Controller
CONSTRUCTION FOR VIBRATION TOLERANCE
- High-dampening Turntable Platter
- Rigid Cabinet Construction
- Silicon Rubber Insulator
HIGH QUALITY PARTS
- High Sensitive Tonearm
- Gold--plated Detachable Terminals
TECHNICS DEFINITIVE DESIGN
TURNTABLE SECTION
- Type: Direct Drive Manual Turntable
- Turntable Speeds: 33 1/3, 45, 78 r/min
- Adjust Range: ±8%, ±16%
- Starting Torque: 2.2 kg･cm
- Build-up Characteristics: 0.7 s. from standstill to 33 1/3 r/min
- Wow and Flutter: 0.025% W.R.M.S.
- Rumble: 78dB (IEC 98A Weighted)
- Turntable Platter: Aluminum die-cast
Diameter：332mm
Weight：Approx. 2.5kg (Including rubber sheet)
TONEARM SECTION
- Type: Universal, Static Balance
- Effective Length: 230mm • Overhang: 15mm
- Tracking Error Angle:
Within 2° 32\' (at the outer groove of 30cm record)
Within 0° 32\' (at the inner groove of 30cm record)
- Offset Angle: 22°
- Arm Height Adjustment Range: 0 - 6mm
- Stylus Pressure Adjustment Range: 0 - 4g (Direct Reading)
- Head Shell Weight: Approx. 7.6g
- Applicable Cartridge Weight Range:
[without auxiliary weight] 5.6 - 12.0g (14.3 - 20.7g (including head shell))
[with auxiliary weight] 10.0 - 16.4g (18.7 - 25.1g (including head shell))
- Cartridge Mounting Dimension: JIS 12.7mm, interval • Head Shell Terminal Lug: 1.2mmφ 4-pin terminal lug
TERMINALS
- Audio Output: PHONO (Pin Jack) x 1, EARTH TERMINAL x 1
GENERAL
- Dimensions (W x H x D): 453 x 173 x 372 mm
- Weight: Approx. 11.2kg
|
| Reloop RP-7000 MK2 Overview
The silver RP-7000 MK2 Upper Torque Turntable System from Reloop features a direct-drive motor and rugged construction. It is resistant to vibrations that can be caused by heavy bass sounds in DJ booths and its shock-absorbing feet help to further improve isolation. The surface is coated with a scratch-resistant high-quality silver metalic finish. The RP-7000 MK2 features a statically balanced S-shaped tonearm with hydraulic lift and anti-skating mechanism. The tonearm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tonearm comes with a universal connection for pickup cartridge systems (SME).
The aluminum LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. An additional start/stop button has been integrated to facilitate a vertical setup (battle position) and by using the buttons on the system's top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mix.
Furthermore, using the high-resolution pitch fader you can adjust the platter speed in the classic turntable pitch range ±8%. However, the RP-7000 MK2 is also capable of a wider, DJ-friendly ±16% pitch range and a massive ±50% ultra-pitch. This allows for increased creativity when modulating the playing record's tone. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%).
Thanks to the recessed rear connection panel, the RP-7000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals.
The fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. In addition, the turntable break speed (platter stop) can be adjusted from 0.2 to 6 seconds and the precision-machined, heavy die-cast aluminum platter is lined with vibration reducing rubber to eliminate unwanted vibrations and resonance.
- Rigid chassis construction with heavier design and additional reinforcements out of metal, rubber, and molding compound for high-vibration damping and isolation
- Powerful starting torque (adjustable from 2.8 - 4.5kg/cm)
- Fine-tuned motor control for further optimization of wow and flutter and rotation
- Height-adjustable tonearm base (VTA) and anti-skating control
- Satin aluminum material used for tonearm
- Adjustable pitch scale for precise adjustments
- Easily replaceable, freely rotatable LED needle light in aluminum design
- Quartz driven DJ turntable with upper-torque direct drive
- Adjustable stop speed (0.2 to 6 seconds)
- Precise control of motor with 3 speeds (33 1/3, 45 & 78 rpm)
- Precision manufactured, die-cast aluminum turntable
- Rubber inlays to reduce vibrations and background noise
- Static-balance universal S-shaped tonearm with hydraulic lift and anti-skating mechanism
- Universal connection for pickup systems (SME)
- Pitch range ±8%, ±16%, ±50%
- Additional start/stop button for vertical positioning
- Reverse Function: switch for forward and reverse operation
- Recessed connection cavity for easy installation in cases & seamless adjustment
- Phono and line out (no ground required)
- Removable mains and cinch cable
- Shock-absorbing feet to insulate against vibrations
|
Reviews
There are no reviews yet.