RELOOP RP2000 MK2 Direct Drive Turntable

345.00 incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: 042264 Category:
Newly developed top panel and reinforced housing construction Reworked metallic buttons with improved feel & tactile response Precision Pitch with selectable ranges of +/-8 % Superior finish in deep black metallic Quartz-driven DJ turntable with direct drive Perfect for beginners Precise motor control with 2 speeds selectable (33 1/3 & 45 rpm) Precision-engineered, die-cast aluminium […]

 

Read more

  • Newly developed top panel and reinforced housing construction
  • Reworked metallic buttons with improved feel & tactile response
  • Precision Pitch with selectable ranges of +/-8 %
  • Superior finish in deep black metallic
  • Quartz-driven DJ turntable with direct drive
  • Perfect for beginners
  • Precise motor control with 2 speeds selectable (33 1/3 & 45 rpm)
  • Precision-engineered, die-cast aluminium platter with stable rotation
  • Statically balanced s-shaped tone arm with hydraulic lift and anti-skating – mechanism
  • Universal connection for pick-up systems (SME)
  • Extendible needle illumination
  • Built-in phono pre-amplifier (no grounding necessary)
  • Switchable phono and line level output
  • Shock-absorbing feet for vibration isolation
  • Sturdy, heavy construction with optimized damping features

Turntable:

  • Type: direct drive turntable
  • Drive: quartz-driven direct drive
  • Motor: 8-pol., 2-phase, brushless DC motor
  • Turntable speeds: 2 speeds, manual (33 1/3, 45 RPM)
  • Starting torque: > 1kg/cm
  • Brake time: < 1 sec.
  • Start-up / rpm change: < 1 sec.

Platter:

  • Material: aluminium die-cast
  • Diameter: 332 mm

Connections:

  • 1x PHONO out (gold-plated), 1x GND

Accessories included:

  • Platter, OM Black pick-up system (by Ortofon), headshell, slipmat, counterweight, power cord,
    operating instruction manual
Weight 7.00 kg

Reviews

There are no reviews yet.

Be the first to review “RELOOP RP2000 MK2 Direct Drive Turntable”

Your email address will not be published. Required fields are marked *

Quick Comparison

RELOOP RP2000 MK2 Direct Drive Turntable removeORTOFON TA-110 9" static-balance tonearm removeRELOOP RP-7000 MKII Direct drive turntable removeORTOFON TA-210 12" static-balance tonearm removeTECHNICS SL-1200 GR Direct Drive Turntable (no cartridge) removeReloop RP-7000 MK2 Upper Torque Turntable System Silver remove
NameRELOOP RP2000 MK2 Direct Drive Turntable removeORTOFON TA-110 9" static-balance tonearm removeRELOOP RP-7000 MKII Direct drive turntable removeORTOFON TA-210 12" static-balance tonearm removeTECHNICS SL-1200 GR Direct Drive Turntable (no cartridge) removeReloop RP-7000 MK2 Upper Torque Turntable System Silver remove
ImageReloop RP-7000 MK2 Upper Torque Turntable System Silver pikap artsound
SKU042264TA-110040277TA-210SL1200GR040278
Rating
Price 345.00 incl. GR VAT1,501.00 incl. GR VAT 555.00 incl. GR VAT1,549.00 incl. GR VAT 1,469.40 incl. GR VAT 569.00 incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

In stock

In stock

In stock

Available on backorder

Only 3 left in stock

AvailabilityOnly 1 left in stock (can be backordered)In stockIn stockIn stockAvailable on backorderOnly 3 left in stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Key Features
  • Powerful Direct-Drive Motor
  • Sturdy Rugged Construction
  • Heavy Weight for Vibration Resistance
  • Balanced S-Shaped Tonearm
  • Improved Tonearm Base for Stability
  • Dual Start/Stop Buttons
  • Precise Motor Control with Reverse
  • High-Resolution Pitch Control
  • Built-In Phono Preamp
  • Includes Slipmat, RCA Cable, Power Cord
Content
  • Newly developed top panel and reinforced housing construction
  • Reworked metallic buttons with improved feel & tactile response
  • Precision Pitch with selectable ranges of +/-8 %
  • Superior finish in deep black metallic
  • Quartz-driven DJ turntable with direct drive
  • Perfect for beginners
  • Precise motor control with 2 speeds selectable (33 1/3 & 45 rpm)
  • Precision-engineered, die-cast aluminium platter with stable rotation
  • Statically balanced s-shaped tone arm with hydraulic lift and anti-skating - mechanism
  • Universal connection for pick-up systems (SME)
  • Extendible needle illumination
  • Built-in phono pre-amplifier (no grounding necessary)
  • Switchable phono and line level output
  • Shock-absorbing feet for vibration isolation
  • Sturdy, heavy construction with optimized damping features
Turntable:
  • Type: direct drive turntable
  • Drive: quartz-driven direct drive
  • Motor: 8-pol., 2-phase, brushless DC motor
  • Turntable speeds: 2 speeds, manual (33 1/3, 45 RPM)
  • Starting torque: > 1kg/cm
  • Brake time: < 1 sec.
  • Start-up / rpm change: < 1 sec.
Platter:
  • Material: aluminium die-cast
  • Diameter: 332 mm
Connections:
  • 1x PHONO out (gold-plated), 1x GND
Accessories included:
  • Platter, OM Black pick-up system (by Ortofon), headshell, slipmat, counterweight, power cord, operating instruction manual
ORTOFON TA-110 TONEARM The TA-110 is a product with great benefits for the discerning analogue user. FEATURES • TA-110 is a static balance gimbal type arm, easy to use and adjust for optimal VTF settings • TA-110 has a standard 5-pin DIN connector for tonearm cable • The tonearm geometry allows for a Baerwald alignment (also the IEC recommendations) • Counterweight with Inner/Outer scale - Inner scale to be applied with main counterweight - Outer scale to be applied when extra mass ring is added • Counterweight will work with headshell+cartridge mass approximately in the range 20 to 28g • TA-110 is fitted with a standard headshell connector and can easily be adjusted in accordance with the included mounting template • Extra mass ring for heavier cartridge and headshell combinations included. The extra mass ring may need to be attached to achieve proper tracking force TECHNICAL DATA: • Effective mass without headshell 3.5 g • Mass of supplied headshell 15.5 g • Effective armlength (distance between the stylus and pivot point): 231.0 mm • Mounting distance (distance between the pivot point and turntable center): 213.0 mm • Offset angle: 23.9 degrees • Overhang: 18.0 mm • Tracking force adjusting range (direct reading): 0-3 g • Height adjustment range: 35-55 mm • Diameter of the armbase mounting hole: 19-20 mm • Diameter of the center shaft of tonearm: 18.0 mm • Inner null point: 66 mm • Outer null point: 120.9 mm • Counterweight for cartridge + headshell mass between 21 and 28 g included • Headshell LH-2000E, weight: 15.5 g, included • TA-110 total weight including headshell: 470 g • Set of tonearm cables 6NX-TSW-1010 included • Extra mass ring, weight 45 g, for heavier cartridges included
Features
  • NEW features of the MK2 version:
  • Built for the club: Rigid chassis construction with an even heavier design with additional reinforcements made of metal, rubber and moulding compound for high vibration damping and isolation
  • More powerful starting torque (adjustable from 2.8 - 4.5 kg/cm)
  • Fine-tuned motor control for further optimization of wow and flutter and rotation
  • Newly developed, height-adjustable tone arm base (VTA) and Anti-Skating control
  • Particularly light weight and rigid, satin aluminium material used for tone arm
  • Adjustable Pitch scale for precise adjustments
  • Optional ground terminal offers additional protection in complex club & studio environments
  • Easily replaceable, freely rotatable LED needle light in new aluminium design
  • High-quality and hard-wearing deep black, metallic finish
  • Quartz driven DJ turntable with upper-torque direct drive
  • Adjustable stop speed (0.2 - 6 sec.)
  • Precise control of motor with 3 speeds (33 1/3, 45 & 78 RPM)
  • Precision manufactured, die cast aluminium turntable
  • Rubber inlays for reduction of vibrations and background noise
  • Statically balanced universal S-shaped tone arm with hydraulic lift and anti-skating mechanism
  • Universal connection for pickup systems (SME)
  • Pitch range +/-8 %, +/-16 %, +/-50 % (Ultra Pitch)
  • Quartz lock
  • Additional start/stop button for vertical positioning
  • Reverse function: switch for forwards and reverse operation
  • Recessed connection cavity for easy installation in cases & seamless adjustment
  • Phono and line out (no grounding required)
  • Removable mains and RCA cable
  • Safety mains switch
  • Shock-absorbing feet against vibrations
Technical Data Turntable:
    • Type: direct-drive turntable
    • Drive: quartz driven upper-torque direct drive
    • Motor: 16-pole, 3-phase, brushless motor
    • Turntable speeds: 3 speeds, manual (33 1/3, 45, 78 RPM)
    • Starting torque: 2.8 – 4.5 kg/cm (adjustable)
    • Adjustable stop time (0.2 - 6 sec.)
    • Start-up time / change to RPM: 55dB (DIN-B)
    • Brake system: electronic brake
Platter:
    • Material: die cast aluminium
    • Diameter: 332 mm
    • Weight: approx. 1.5 kg
Tone arm:
    • Type: universal, static balanced, S-shaped
    • Effective length: 230 mm
    • Overhang: 15 mm
    • Tracking error range: < 3°
    • VTA setting range: 0-6 mm
    • Useable weight of pickups: 3.5~8.5 g (incl. headshell 13~18 g)
    • Anti-skating range: 0 – 3 g
    • Effective tone arm mass: 30 g
Connections:
    • 1x PHONO/LINE Out (gold-plated), 1x GND earth connection
General:
    • Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
    • Power consumption: 13 W
    • Dimensions: 458 x 354 x 144,6 mm
    • Weight: approx. 11.7 kg
Accessories included:
  • turntable, slipmat, LED needle light, counterweight, PHONO Cinch cable with earth, power cord, operating instructions

ORTOFON TA-210 TONERAM

The Ortofon TA-210 tonearm has gone to the next level by reducing unwanted vibrations in the tonearm. TA-210 armtube is a lot less stressed than conventional armtubes due to the Technical rubber and TPE excellent damping properties.
 
FEATURES:

• TA-210 is a static balanced gimbal type arm, easy to use and adjust for optimal VTF settings
• TA-210 has a standard 5-pin DIN connector for tonearm cable
• The tonearm geometry allows for a Baerwald alignment (also the IEC recommendations)
• Counterweight with Inner/outer scale
  - Inner scale to be applied with main counterweight
  - Outer scale to be applied when extra mass ring is added
• Counterweight will work with headshell+cartridge mass approximately in the range 20 to 28g
• TA-210 is fitted with a standard headshell connector and can easily be adjusted in accordance with the included mounting template
• Extra mass ring, weight 45 g, for heavier cartridge and headshell combinations included (the extra mass ring may need to be attached to achieve proper tracking force)
 

TECHNICAL DATA:

• Effective mass without headshell: 5 g
• Effective armlength (distance between the stylus and pivot point): 329.0 mm
• Mounting distance (distance between the pivot point and turntable center): 316.6 mm
• Offset angle: 16.5 degrees
• Overhang: 12.4 mm
• Tracking force adjusting range (direct reading): 0-3/0-4 g
• Height adjustment range: 35-55 mm
• Diameter of the armbase mounting hole: 19-20 mm
• Diameter of the center shaft of tonearm: 18.0 mm
• Inner null point: 66 mm
• Outer null point: 120.9 mm
• Counterweight for cartridge + headshell mass between 21 and 28g included
• Headshell LH-2000E included
• Headshell weight: 15.5 g
• TA-210 total weight including headshell: 536 g
• Set of tonearm cables 6NX-TSW-1010 included

Fusing Technics’ traditional analogue and leading-edge digital technologies Launched in 2016, the SL-1200G combined Technics‘ traditional analogue technology and advanced digital technology, while redesigning parts throughout. Its outstanding performance literally rocked the hi-fi market and redefined the reference for direct-drive turntables. Parts that were inherited from the SL-1200G were newly developed for the SL-1200GR, beginning with the coreless direct-drive motor and precise motor control technology that eliminated the cogging that originated from rotation irregularity, and including a low-vibration, high-rigidity platter and high-sensitivity tonearm. By these measures, the level of performance clearly outperforms the usual standards of its class. The SL-1200GR invites more audio enthusiasts to enjoy music with the rich, robust sound of analogue records. Coreless Direct Drive Motor In 1970, Technics commercialized the world‘s first direct-drive turntable, and the system took the world by storm. Unlike belt-drive and other systems, direct-drive systems rotate the motor at low speed and directly drive the platter, thus providing numerous advantages, such as the almost complete absence of degradation in S/N ratio due to motor vibration and deceleration mechanisms, as well as high reliability over a long period time because of not requiring parts replacement. And in 2016, Technics developed the twin-rotor, surface-facing, coreless direct-drive motor with rotor magnets placed on both sides, thereby eliminating the rotation irregularity of the motor, referred to as "cogging,” which was a unique issue for direct-drive systems. This motor was adopted for the SL-1200G, which once again drew a significant response in the hi-fi market. The SL-1200GR inherits the same design philosophy with the new development of a single-rotor, surface-facing, coreless direct-drive motor, resulting in the elimination of cogging. High-precision Motor Control The rotation control, which verifies and corrects the precision of the motor, uses the latest motor control technology cultivated in the development of Blu-ray disc devices, just as that used by the SL-1200G. Sine waves stored in ROM are used for the control waveforms at a constant speed, and this achieves smoother and more stable rotation compared with using the simple sine wave generation with an external coil as in the conventional SL-1200MK5. In addition, the electrical circuitry has had tuning performed so that the newly developed motor of the SL-1200GR achieves maximum performance. Two-Layer Platter Construction The platter achieves high rigidity and vibration damping characteristics by using a two-layer construction with deadening rubber applied to the entire rear surface of the aluminium die-cast to eliminate the unnecessary resonance that is otherwise relayed to the record, thereby producing clear sound. Precision Tonearm The tonearm tracks the rotation of the record and enables reading with high precision, and the tonearm inherited by Technics is the traditionally used static-balance universal S-shaped tonearm, employing an aluminium pipe with excellent lightweight and rigidity for the material of the tonearm pipe. With its gimbal suspension construction, the tonearm bearing section uses a cut-processed housing that employs high-precision bearings, as in the SL-1200G. The high initial-motion sensitivity of 5 mg or less is achieved through manual assembly and adjustment by skilled Japanese artisans. This enables the grooves etched into the records to be accurately traced. High-Rigidity Body The SL-1200GR ensures high rigidity by using a body with a two-layered construction solidly unifying the BMC and the aluminium die-cast chassis. For the insulators supporting the body, as with the SL-1200G, the SL-1200GR uses special silicon rubber that ensures both high vibration damping characteristics and long-term reliability. Vibration in the horizontal direction is absorbed by reinforcement with cylindrical tubes using microcell polymers. While inheriting the technology of the SL-1200G, the insulators have had tuning performed specifically for the SL-1200GR.
  • Type: Direct Drive Manual Turntable
  • Turntable Speeds: 33-1/3, 45 and 78 r/min
  • Adjust Range: ±8 %, ±16 %
  • Starting Torque: 2.2 kg-cm
  • Build-up Characteristics: 0.7 s. from Standstill to 33-1/3 r/min
  • Wow And Flutter: 0.025 % W.R.M.S.
  • Rumble: 78 dB (IEC 98A weighted)
  • Turntable Platter: Aluminium diecast
  • Diameter: 332 mm
  • Weight: Approx. 2.5 kg (Including rubber sheet)
  • Tonearm Section
  • Type: Universal Static Balance
  • Effective Length: 230 mm (9-1/16″)
  • Overhang: 15 mm (19/32″)
  • Tracking Error Angle: Within 2° 32′ (at the outer groove of 30 cm record), Within 0° 32′ (at the inner groove of 30 cm record)
  • Offset Angle: 22°
  • Arm-height Adjustment Range: 0 – 6 mm
  • Stylus Pressure Adjustment Range: 0 – 4 g (Direct Reading)
  • Head Shell Weight: Approx. 7.6 g
  • General
  • Power Consumption: 11 W Approx., 0.2 W (Standby)
  • Dimensions (WxHxD): 453 x 173 x 372 mm
  • Weight: Approx. 11.5 kg

Reloop RP-7000 MK2 Overview

The silver RP-7000 MK2 Upper Torque Turntable System from Reloop features a direct-drive motor and rugged construction. It is resistant to vibrations that can be caused by heavy bass sounds in DJ booths and its shock-absorbing feet help to further improve isolation. The surface is coated with a scratch-resistant high-quality silver metalic finish. The RP-7000 MK2 features a statically balanced S-shaped tonearm with hydraulic lift and anti-skating mechanism. The tonearm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tonearm comes with a universal connection for pickup cartridge systems (SME). The aluminum LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. An additional start/stop button has been integrated to facilitate a vertical setup (battle position) and by using the buttons on the system's top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mix. Furthermore, using the high-resolution pitch fader you can adjust the platter speed in the classic turntable pitch range ±8%. However, the RP-7000 MK2 is also capable of a wider, DJ-friendly ±16% pitch range and a massive ±50% ultra-pitch. This allows for increased creativity when modulating the playing record's tone. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%). Thanks to the recessed rear connection panel, the RP-7000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals. The fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. In addition, the turntable break speed (platter stop) can be adjusted from 0.2 to 6 seconds and the precision-machined, heavy die-cast aluminum platter is lined with vibration reducing rubber to eliminate unwanted vibrations and resonance.
  • Rigid chassis construction with heavier design and additional reinforcements out of metal, rubber, and molding compound for high-vibration damping and isolation
  • Powerful starting torque (adjustable from 2.8 - 4.5kg/cm)
  • Fine-tuned motor control for further optimization of wow and flutter and rotation
  • Height-adjustable tonearm base (VTA) and anti-skating control
  • Satin aluminum material used for tonearm
  • Adjustable pitch scale for precise adjustments
  • Easily replaceable, freely rotatable LED needle light in aluminum design
  • Quartz driven DJ turntable with upper-torque direct drive
  • Adjustable stop speed (0.2 to 6 seconds)
  • Precise control of motor with 3 speeds (33 1/3, 45 & 78 rpm)
  • Precision manufactured, die-cast aluminum turntable
  • Rubber inlays to reduce vibrations and background noise
  • Static-balance universal S-shaped tonearm with hydraulic lift and anti-skating mechanism
  • Universal connection for pickup systems (SME)
  • Pitch range ±8%, ±16%, ±50%
  • Quartz lock
  • Additional start/stop button for vertical positioning
  • Reverse Function: switch for forward and reverse operation
  • Recessed connection cavity for easy installation in cases & seamless adjustment
  • Phono and line out (no ground required)
  • Removable mains and cinch cable
  • Safety mains switch
  • Shock-absorbing feet to insulate against vibrations
Weight7.00 kg0.47 kg12.00 kg0.54 kg12.00 kg13 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 7.00 kg
Weight 0.47 kg
Weight 12.00 kg
Weight 0.54 kg
Weight 12.00 kg
Weight 13 kg
Color