ROCKTRON HUSH THE PEDAL Noise reduction

Discontinued

63.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Availability: Discontinued Discontinued SKU: HUSH THE PEDAL Category:
If you arenʼt using the HUSH, you arenʼt using real noise reduction for guitar. When used properly, the HUSH will wipe out hiss, unwanted feedback and pickup buzz. The HUSH pedal delivers 65dB of signal cleanup, while your music signal integrity remains unaffected. In other words, get rid of the noise without altering your tone! […]

 

Read more

If you arenʼt using the HUSH, you arenʼt using real noise reduction for guitar. When used properly, the HUSH will wipe out hiss, unwanted feedback and pickup buzz. The HUSH pedal delivers 65dB of signal cleanup, while your music signal integrity remains unaffected. In other words, get rid of the noise without altering your tone!

Guitar Player Magazine wrote that the “HUSH Pedal will work for all guitar-related noise problems: itʼs perfect” and “its potent noise-killing abilities will be fully appreciated.”  

Simply plug the HUSH in AFTER distortion boxes, wah-wahs, noisy vintage effects, or other noisy units and turn the Threshold knob until the noise goes away.  Itʼs that easy! You will not find a more effective noise reduction.  Unlike noise “gates” that chop off the end of your notes, or ruin your sustain, HUSH the Pedal is actually a form of single-ended noise reduction that tracks your signal all the way and pushes the noise floor below the point where your ear can hear the noise.  It does not hurt your sustain or chop off the end of your notes.   Simply use the Threshold knob to smooth out your signal while wiping out noise. This is the best friend a guitar player could have!

Now hold on, partner. You must pay attention to the proper setup, with the HUSH pedal going AFTER your noisy stomp boxes. The HUSH is not designed to take the input directly from your guitar WITHOUT some processing happening between the guitar and the HUSH noise reduction. When setup correctly, with your signal going from your preamp and effects, or from your distortion and effects, into the HUSH, you WILL be amazed at how it will clean up the excess noise, including pickup buzz! The HUSH can also be used in your amplifierʼs effects loop. However, if you are running multiple effects through this loop, the HUSH should always be the last dynamic device in the signal chain, but before digital delays or reverbs.

The HUSH pedal incorporates the latest version of the HUSH discreet circuitry which also includes Rocktronʼs patented Variable Integrated Release (V.I.R.) technology. V.I.R. technology utilizes a low-noise VCA with precision detector circuits to achieve the smoothest and most transparent noise reduction possible.
    
HUSH The Pedal Demo Video with Gary Hoey
Specifications

    Input Impedance: 470K
    Maximum Input: +5dBu
    Maximum Output: +5dBu
    Distortion: .09% 0dBu@1KHz typical
    Dynamic Range: 99dBu (A-weighted)
    Frequency Response: ±½dB 20Hz-20KHz
    Noise Reduction: over 60dB
    Current Consumption: 10mA
    Power Requirement: 9V Battery or 9V DC adaptor

Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “ROCKTRON HUSH THE PEDAL Noise reduction”

Your email address will not be published. Required fields are marked *

Quick Comparison

ROCKTRON HUSH THE PEDAL Noise reduction removeVOX V847 WAH-WAH PEDAL removeMARSHALL EH-1 ECHOHEAD Guitar Effect Pedal, Echo/Delay removeDIGITECH XHP 7-MODE PHASER removeVOX SNAKE CHARMER COMPRESSOR PEDAL removeBOSS OS-2 OverDrive/Distortion Pedal remove
NameROCKTRON HUSH THE PEDAL Noise reduction removeVOX V847 WAH-WAH PEDAL removeMARSHALL EH-1 ECHOHEAD Guitar Effect Pedal, Echo/Delay removeDIGITECH XHP 7-MODE PHASER removeVOX SNAKE CHARMER COMPRESSOR PEDAL removeBOSS OS-2 OverDrive/Distortion Pedal remove
Image
SKUHUSH THE PEDALV847 WAH-WAHPEDL-10035XHPVOX SNAKE CHARMER690.ROL.035
Rating
Price 63.00 incl. GR VAT 90.89 incl. GR VAT 86.90 incl. GR VAT 52.00 incl. GR VAT 87.01 incl. GR VAT125.23 incl. GR VAT
Stock

Out of stock

Available on backorder

Only 2 left in stock

In stock

In stock

Only 1 left in stock (can be backordered)

AvailabilityOut of stockAvailable on backorderOnly 2 left in stockIn stockIn stockOnly 1 left in stock (can be backordered)
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

If you arenʼt using the HUSH, you arenʼt using real noise reduction for guitar. When used properly, the HUSH will wipe out hiss, unwanted feedback and pickup buzz. The HUSH pedal delivers 65dB of signal cleanup, while your music signal integrity remains unaffected. In other words, get rid of the noise without altering your tone!

Guitar Player Magazine wrote that the "HUSH Pedal will work for all guitar-related noise problems: itʼs perfect" and "its potent noise-killing abilities will be fully appreciated."  

Simply plug the HUSH in AFTER distortion boxes, wah-wahs, noisy vintage effects, or other noisy units and turn the Threshold knob until the noise goes away.  Itʼs that easy! You will not find a more effective noise reduction.  Unlike noise "gates" that chop off the end of your notes, or ruin your sustain, HUSH the Pedal is actually a form of single-ended noise reduction that tracks your signal all the way and pushes the noise floor below the point where your ear can hear the noise.  It does not hurt your sustain or chop off the end of your notes.   Simply use the Threshold knob to smooth out your signal while wiping out noise. This is the best friend a guitar player could have!

Now hold on, partner. You must pay attention to the proper setup, with the HUSH pedal going AFTER your noisy stomp boxes. The HUSH is not designed to take the input directly from your guitar WITHOUT some processing happening between the guitar and the HUSH noise reduction. When setup correctly, with your signal going from your preamp and effects, or from your distortion and effects, into the HUSH, you WILL be amazed at how it will clean up the excess noise, including pickup buzz! The HUSH can also be used in your amplifierʼs effects loop. However, if you are running multiple effects through this loop, the HUSH should always be the last dynamic device in the signal chain, but before digital delays or reverbs.

The HUSH pedal incorporates the latest version of the HUSH discreet circuitry which also includes Rocktronʼs patented Variable Integrated Release (V.I.R.) technology. V.I.R. technology utilizes a low-noise VCA with precision detector circuits to achieve the smoothest and most transparent noise reduction possible.
    
HUSH The Pedal Demo Video with Gary Hoey
Specifications

    Input Impedance: 470K
    Maximum Input: +5dBu
    Maximum Output: +5dBu
    Distortion: .09% 0dBu@1KHz typical
    Dynamic Range: 99dBu (A-weighted)
    Frequency Response: ±½dB 20Hz-20KHz
    Noise Reduction: over 60dB
    Current Consumption: 10mA
    Power Requirement: 9V Battery or 9V DC adaptor

The new V847 Wah-Wah pedal is an enhanced version of the most famous guitar effects pedal of all time. Based on the specifications of the original pedal developed by VOX in the '60s, the new Wah-Wah offers guitarists the same legendary tone with the addition of AC power capability and a buffered input jack for preserving the unprocessed guitar tone when the pedal is not engaged. The pedalʼs inductor has undergone a redesign to be closer in specification to the original VOX wah inductors, for improved dynamics and tone. These additions will benefit players of all genres who use a wah pedal as an integral part of their sound.

About the Wah-Wah

VOX developed the worldʼs first Wah-Wah effect during the '60s in an effort to allow guitarists to emulate the sound of a trumpet being muted an important musical ingredient of the day. VOXʼs original Wah-Wah pedal quickly gained widespread popularity and its unique sonic characteristics have encouraged further experimentation by guitarists ever since. Having made spotlight appearances on some of the most famous recordings of all time, the Wah-Wah is still considered "must-have equipment” for guitar players of all levels and abilities today.

VOX V847 Wah-Wah Specificaitons
  • Input/Output jacks: INST jack, AMP jack, DC i/p jack.
  • Power supply: One 9V DC battery 6F22(S-006P)
  • Power consumption: 540uA @ 9VDC
  • Battery life for continuous use: approximately >100 hours with manganese battery (will vary depending on conditions)
  • Dimensions: 102(W) x 252(D) x 75(H) (including rubber feet, pedal in lowest postion)
  • Weight: 1673g (including battery)
  • Included Accessories: Vinyl carry bag
The Marshall EH-1 ECHOHEAD Guitar Effect Pedal, Echo/Delay. Add dense rhythmic textures to your sound. The Marshall EH-1 ECHOHEAD recreates six different delay effects for you to explore, from crystal-clear echoes to hypnotic reverse delays via the vintage whir of a retro tape machine. Create pulsing tones from your guitar rig and add dense rhythmic textures to your sound. The EH-1 Echohead features a maximum delay time of 2000ms, stereo outputs and a tap tempo delay imput. The EH1 Echohead dual outputs offer the choice of using a passive bypass for the main signal path to ensure complete tonal integrity or to allow your pedal to spill over, permitting your echo to naturally die away. The main features of the Marshall EH-1 ECHOHEAD include:
  • 6 different, high quality delay effects for you to explore
  • Multi-mode selector switch
  • Delay time control
  • Feedback control
  • Level control
  • Solid metal casing
  • Passive bypass
  • Tap tempo pedal input
  • Power: 9V DC Centre Negative Regulated PSU or PP3 battery
  • Minimum Current Draw: 80mA
  • Switches: On/Off Switch
  • Indicators: On/Off LED
  • Jacks: 2 Input, 2 Output 'Jack sockets' (1/4 inch)
  • Input Impedance: 1MOhm
  • Output Load Impedance: less than 1kOhm
  • Dimensions: 120mm x 65mm x 55mm
  • Weight: 510 grammes

The Digitech XHP HYPER PHASE Guitar Effect Stomp Box Pedal. Dial in the exact phaser or flanger sound you want from a selection of awesome voicing sounds.

The Digitech XHP Hyper Phase delivers 7 operational modes, instead of the typical one mode only that you find in some other pedals. These operational modes are easily selectable using the mode control allowing you to choose from a selection of awesome voicing sounds, triggering feature, and useful step functions. Now you are no longer limited to a one-trick pedal. You can dial in the exact phaser or flanger sound you want! The Hyper Phase has Speed, Depth, Regen, and Mode controls. Outputs for both pedals include Out 1 (Mono) and Out 2 for stereo operation.

The main features of the Digitech XHP HYPER PHASE include:

  • Dial in the exact phaser or flanger sound you want from a selection of awesome voicing sounds
  • 7 Different phase types
  • Speed, Depth, Regen, and Mode controls
  • Triggering and step capability
  • Stereo outputs with switchable CIT Cabinet Modeling

Tame your tone with the new Snake Charmer Compressor. The result? Silky smooth, mesmerizing tone that behaves as it should. The Snake Charmerʼs compression affects the ratio and threshold of the signal, smoothing out peaks and spikes. At the same time, the Snake Charmer also increases the Gain level to complement the corresponding ratio and threshold settings so that the overall gain remains constant.

Thereʼs also a Gain Reduction Indicator that gives you visual cues of the results of your settings. And a High/Low Switch lets you choose between two overall levels of ratio. The Snake Charmer is equipped with other controls for Attack, which determines how quickly the gain reduction kicks in, and Release, which determines how long the gain is attenuated. Finally, the High-End Emphasis control fine-tunes the amount of compression applied to the top end of the guitar signal.

  • Snake Charmer Compressor CT05
    • Connection: Input: x1 (guitar input), Output: x1 (line output)
    • Input / Output Impedance: 830 k-ohm / 4 k-ohm
    • Tube: 12AU7 (ECC82)
    • Power Supply: Four AA alkaline batteries or DC9V AC adapter
    • Battery Life: Approx. 18 hours
    • Current Consumption: 95 mA
    • Dimensions: 168.5 (W) x 155.5 (D) x 64.0 (H) mm / 6.63” (W) x 6.12” (D) x 2.52” (H)
    • Weight: 1,007 g (excluding batteries / 1,102 g including batteries)
    • Included Items: Four AA alkaline batteries

 

The OS-2 gives players a choice of overdrive or distortion or lets them combine both--all in a single compact pedal. Its distortion maintains the subtle nuances of single-coil guitar pickups.

  • Flexible distortion pedal capable of producing blended overdrive/distortion sounds
  • Provides both "over-the-top" distortion sounds and less extreme overdrive tones for rhythm playing
  • Includes Level, Tone, Drive and Color controls for precise tonal shaping
  • BOSS 5-year warranty
Weight0.50 kg1.67 kg0.51 kg1.00 kg1.00 kg1.20 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 1.67 kg
Weight 0.51 kg
Weight 1.00 kg
Weight 1.00 kg
Weight 1.20 kg