RODE NT-1A STUDIO CONDESER MICROPHONE BUNDLE

188.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The RODE NT1-A has become an industry standard; delivering the warmth, extended dynamic range, clarity and high SPL capability usually only featured by some of the most expensive microphones. Now available as the \’Complete Vocal Recording Solution\’ this NT1-A package now includes everything you need to get truly professional vocal recordings – the world\’s quietest […]

 

Read more

The RODE NT1-A has become an industry standard; delivering the warmth, extended dynamic range, clarity and high SPL capability usually only featured by some of the most expensive microphones.

Now available as the \’Complete Vocal Recording Solution\’ this NT1-A package now includes everything you need to get truly professional vocal recordings – the world\’s quietest studio microphone, a studio grade pop shield and shock mount, a premium 20\’ cable, dust cover, an instructional DVD with recording tips, and of course R DE\’s industry leading ten year warranty.

  • Large 1″ (25mm) capsule with gold plated diaphragm
  • Cardioid polar pattern
  • Self noise of only 5dB (A)
  • Ultra low noise, transformerless surface mount circuitry
  • Wide dynamic range
  • Gold plated output contacts
  • True condenser (externally biased)
  • Internal capsule shock mounting

Microphone Impedance: 100 Ohms Microphone Dynamic Range: > 132dB (per IEC268-15) Microphone Sensitivity: -31.9dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) Microphone Diameter: 50mm Microphone Powering: +48 Volts (Phantom Power) Physical Weight: 326.00g

Frequency Curve Image:

Weight 3.00 kg

Reviews

There are no reviews yet.

Be the first to review “RODE NT-1A STUDIO CONDESER MICROPHONE BUNDLE”

Your email address will not be published. Required fields are marked *

Quick Comparison

RODE NT-1A STUDIO CONDESER MICROPHONE BUNDLE removeRODE NT-2A Multipattern Condenser Microphone removeBEHRINGER C3 Dual-Diaphragm Studio Condenser Microphone removeAKG PERCEPTION 420 large-diaphragm condenser microphone removeNEUMANN TLM-193 Cardioid Condenser Microphone removeAKG PERCEPTION 220 CONDENSER MICROPHONE remove
NameRODE NT-1A STUDIO CONDESER MICROPHONE BUNDLE removeRODE NT-2A Multipattern Condenser Microphone removeBEHRINGER C3 Dual-Diaphragm Studio Condenser Microphone removeAKG PERCEPTION 420 large-diaphragm condenser microphone removeNEUMANN TLM-193 Cardioid Condenser Microphone removeAKG PERCEPTION 220 CONDENSER MICROPHONE remove
Image
SKUH11RD00025H11RD00030E005253PERCEPTION 420H11NE00001PERCEPTION 220
Rating
Price 188.00 incl. GR VAT 339.00 incl. GR VAT 80.00 incl. GR VAT 222.00 incl. GR VAT 1,399.00 incl. GR VAT 180.00 incl. GR VAT
Stock

Available on backorder

In stock

In stock (can be backordered)

Only 1 left in stock

Available on backorder

In stock

AvailabilityAvailable on backorderIn stockIn stock (can be backordered)Only 1 left in stockAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe RODE NT1-A has become an industry standard; delivering the warmth, extended dynamic range, clarity and high SPL capability usually only featured by some of the most expensive microphones. Now available as the \'Complete Vocal Recording Solution\' this NT1-A package now includes everything you need to get truly professional vocal recordings - the world\'s quietest studio microphone, a studio grade pop shield and shock mount, a premium 20\' cable, dust cover, an instructional DVD with recording tips, and of course R DE\'s industry leading ten year warranty.
  • Large 1" (25mm) capsule with gold plated diaphragm
  • Cardioid polar pattern
  • Self noise of only 5dB (A)
  • Ultra low noise, transformerless surface mount circuitry
  • Wide dynamic range
  • Gold plated output contacts
  • True condenser (externally biased)
  • Internal capsule shock mounting
Microphone Impedance: 100 Ohms Microphone Dynamic Range: > 132dB (per IEC268-15) Microphone Sensitivity: -31.9dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) Microphone Diameter: 50mm Microphone Powering: +48 Volts (Phantom Power) Physical Weight: 326.00g Frequency Curve Image:

NT2-A - ?The Legend Continues? Multi Pattern 1? Condenser Microphone.
 
The new NT2-A carries on the tradition forged by the now legendary R?DE NT2.
A professional large capsule (1?) studio microphone incorporating three-position
pick-up patterns, pad and high pass filter switches conveniently located on the
mic body.
At the heart of the NT2-A is the Australian designed and manufactured HF1 dual
diaphragm capsule. The frequency and transient response of this new transducer
has been voiced to complement today?s modern recording techniques, and yet still
evoke the silky smooth character of the legendary microphones of the 50?s and 60?s.
These features provide the flexibility and superlative audio characteristics that make
the NT2-A one of the most versatile condenser mics available.
The NT2-A?s variable controls allow switching between Omni, Figure 8, and Cardioid
polar patterns. The three position high-pass filter provides a flat response or an 80Hz
and 40Hz high pass filter to be selected. Finally the microphones Pad can be switched
between 0 dB, -5dB and -10dB. The NT2-A comes in a soft pouch with an M2 stand mount.
 
SPECIFICATIONS:
Features:
The Australian designed and manufactured HF1 1? edge terminated, gold sputtered, dual
5 um diaphragm capsule. 3-position variable polar pattern: Omni, Cardioid & Figure 8; all
controlled on the mic. 3-position variable high-pass filter: Flat, 80 Hz or 40 Hz. 3-position
variable pad: 0 dB, -5 dB or -10 dB. Ultra low noise, transformerless SMT circuitry. Wide
dynamic range. High strength heat-treated steel mesh head. Durable satin nickel finish.
Internal capsule shock mounting. Supplied complete with soft pouch and clip. Designed
and manufactured in Sydney, Australia.
Operation power:
The NT2-A is designed to operate from phantom power to the P48 standard. The NT2-A will
operate between 44V and 52V applied with positive polarity to pin 2 and pin 3 of the output
XLR connector.
Operation output impedance:
The NT2-A will operate satisfactorily into a load impedance as low as 1 kΩ. If a load below this
is used, the output signal level will be reduced. The NT2-A output is balanced between pin 2 (hot)
and pin 3 (cold). Pin 1 is ground.
Acoustic principle: Externally polarized 25 mm (1?) dual diaphragm.
Directional pattern: Multi-pattern
Frequency range:  20 Hz ~ 20 000 Hz
Output impedance: 200 Ω
Signal noise ratio din iec 651:
87 dB (1 kHz rel 1 Pa; per IEC651, IEC268-15)
Equvalent noise: 7 dBA SPL (per IEC651, IEC268-15)
Maximum spl:
147 dB (@ 1% THD into 1 kΩ); 157 dB (@ 1% THD into 1 kΩ) - pad at maximum
Sensitivity: -36 dB re 1 Volt/Pascal; (16 mV @ 94 dB SPL) +/-2 dB
Dynamic range din iec 651: 140 dB (per IEC651, IEC268-15)
Power supply voltage: 48 Volts (P48)
Output connection:
3 pin XLR, balanced output between; pin 2(+) and pin 3(-); Pin 1 ground
Weight with battery: 860 grm

Behringer C-3 Dual-Diaphragm Studio Condenser Microphone Introducing the Professional Condenser Microphone C-3 from BEHRINGER Our latest dual-diaphragm condenser microphone C-3 is ideal for high-quality studio recording and live applications. The selectable omnidirectional, cardioid, and figure-eight pickup patterns offer ultimate versatility needed to professionally record vocals and acoustic instruments. The C-3 holds a pressure-gradient transducer with a shock-mounted dual-diaphragm capsule. Its ultra-high sound resolution and flat frequency response rival those of microphones with much higher price tags. It also includes an LED that indicates phantom power operation and a gold-plated XLR output connector to ensure highest signal integrity. The C-3 comes with extensive accessories such as swivel stand and transport case. The C-3 represents state-of-the-art technology at a price that is simply unheard of.A/B, X/Y, and M/S stereo recording Ambience recording Grand piano, woodwind and brass instruments Percussions Drums Classical music recording Studio applications
  • Back-to-back large-diaphragm multi-pattern transducer
  • True condenser technology
  • High sensitivity and 155 dB maximum SPL capability
  • Switchable 20 dB preattenuation pad
  • Switchable bass cut filter
  • Legendary, pristine AKG sound quality
  • Complete with spider-type shock mount and aluminium carrying case
Type Dual-capsule,1-inch large-diaphragm, true condenser pressure-gradient microphone
Polar pattern Cardioid, omnidirectional, figure-eight
Frequency range 20 to 20,000 Hz
Sensitivity 28 mV/Pa (-31 dBV)
Max. SPL 135/155 dB SPL (0/-20 dB) for 0.5% THD
Equivalent noise level 16 dB-A (IEC 60268-4)
Signal/noise ratio (A-weighted) 78 dB
Preattenuation pad 0 dB, -20 dB
Bass filter 12 dB/octave, 300 Hz
Impedance =1000 ohms
Current consumption
Acoustical operating principlePressure gradient transducer
Directional patternCardioid
Frequency range20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohms18 mV/Pa
Rated impedance50 ohms
Rated load impedance1000 ohms
Equivalent SPL CCIR 468-321 dB
Equivalent SPL DIN/IEC 65110 dB-A
S/N ratio CCIR 468-373 dB
S/N ratio DIN/IEC 65184 dB
Maximum SPL for THD 0.5%140 dB
Maximum output voltage13 dBu
Dynamic range of the microphone amplifier DIN/IEC 651130 dB
Supply voltage48 V ± 4 V
Current consumption3 mA
Matching connectorsXLR 3F
Weight480 g
Diameter49 mm
Length175 mm
  • One-inch large-diaphragm, true condenser cardioid transducer
  • Rugged all-metal body
  • Roadworthy construction
  • Switchable 20 dB preattenuation pad
  • Switchable bass cut filter
  • Legendary AKG sound quality
  • Designed and engineered by AKG in Vienna, Austria
  • Comes with spider-type shock mount and aluminium carrying case
The Perception 220 is a large-diaphragm true condenser microphone offering outstanding build quality and excellent value. Its many useful features and included accessories make this microphone uncommonly versatile. It delivers a classic warm, clear sound and conforms to the stringent standards defined for AKG recording products. These standards are based on AKG΄s six decades of experience in making microphones and on input from sound engineers around the world who use AKG products every day. Its 1-inch large-diaphragm true condenser transducer brings AKG studio quality to the project studio as well as all other areas of recording and live sound applications. A switchable bass cut filter and preattenuation pad make it perfectly suited even for use on loud sound sources producing sound pressure levels up to 155 dB SPL. The rugged and roadworthy design makes it also a perfect choice for on-stage applications. The Perception 220 comes with a spider-type shock mount and a rugged metal case.
Type 1" Large Diaphragm True Condenser
Polar pattern cardioid
Frequency range 20 to 20,000 Hz
Sensitivity 18 mV/Pa (-35 dBV)
Max. SPL 135 dB/155 dB (0/-20 dB) for 0.5% THD
Equivalent noise level 16 dB-A (IEC 60268-4)
Signal/noise ratio (A-weighted) 78 dB
Preattenuation pad 0 dB, -20 dB
Bass filter 12 dB/octave at 300 Hz
Impedance =1000 ohms
Current consumption
Weight3.00 kg2.90 kg0.45 kg2.00 kg0.48 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 3.00 kg
Weight 2.90 kg
Weight 0.45 kg
Weight 2.00 kg
Weight 0.48 kg
Weight 1.00 kg