| Content | The NT-USB Mini is a compact, studio-quality USB microphone designed for recording direct to a computer or tablet.
It is simple to set-up and use, and a smooth frequency response and directional pickup pattern make the NT-USB Mini perfect for recording vocals and instruments, livestreaming and gaming, podcasting, voice calls and more.
The included desk stand features a magnetic base that can be detached for easy mounting on mic stands or studio arms, and with its in-built pop filter and zero-latency headphone monitoring, the NT-USB Mini delivers crisp, clear audio in all recording applications.
Acoustic Principle: Pressure gradient Active Electronics: Electret condenser, A/D and USB interface Polar Pattern: Cardioid
Frequency Range: 20 Hz – 20 kHz
Input SPL @ 1%THD: 121dB (A-weighted, as per IEC651) Sample Rate: 48 kHz
Bus Powered: Yes
Bit Depth: 24-bit Analog Output: 3.5mm headphone
Computer Connectivity: USB - simultaneous I/O Mono input, stereo output
Output Connection: USB-C OS Requirements: macOS 10.12 / Windows 10
Weight (grams): 585
Dimensions (millimetres): Height: 141.9 Width: 54.5 Diameter (base): 89.3
• Studio-quality microphone with U SB-C connectivity
• 3.5mm headphone output with zero-latency monitoring
• Easy set-up, plug in and play
• Detachable magnetic desk stand
• In-built pop ? lte
| Polar Chart: |
Cardioid |
| USB compatibility: |
Yes |
| Specifically designed for cymbal and overhead miking, the frequency response of the C 430 ensures a unique crisp sound. With its extremely compact external dimensions, this microphone will keep a low profile on the drum kit without compromising audio quality. Response is 20-20kHz, with 126dB max SPL, and requires phantom power.
Specifications
Polar Pattern: cardioid
Frequency Response: 20?20.000 Hz
Sensitivity: 7 mV/Pa=-43 dBV to 1 V/Pa
Max. SPL for 1% / 3% THD: 126/130 dB SPL
Equivalent Noise Level: 33 dB to DIN 45 412
Electrical Impedance: 200 ohms
Recommended Load Impedance: >2.000 ohms
Power Requirement: 9 to 52 volts universal phantom power
Current Consumption: approx. 2 mA
Connector : 3-pin XLR
Cable Length: 1.5 m (5 ft.)
Finish: matte black
Size : dia.: 19 mm (0.7 in.), length: 79 mm (3.1 in.)
Net / Shipping Weight: 23/192 g (0.8/6,8 oz.)
Optional Accessorires: B15, B18 | Optimised for podcasters, gamers, streamers and home recording applications
Three integrated 14 mm capsules
Switchable polar pattern: omnidirectional, figure-eight, cardioid, stereo
Frequency range: 20 - 20,000 Hz
Max. SPL: 120 dB
AD-converter: 48/44.1 kHz / 16-bit
Gain +17 dB
Mute button
Volume control
Headphone jack: 3.5 mm mini jack
Mini-B USB connector
Plug & Play compatible with Windows 10 (64-bit) and Mac OSX 10.10 or higher
5/8" Thread for mounting on standard microphone stands
Dimensions (H x W x D): 227 x 110 x 110 mm
Weight: 1.7 kg
Includes table stand and USB cable |
Professional quality microphone for GarageBand on iPad, iPhone and Mac. Features: - Up to 96kHz recording. - Studio quality cardioid condenser microphone. - PureDIGITAL connection for pristine sound quality. - No configuration, just plug in and record. - Designed for vocal and acoustic instrument recording. - Input only, output via iPhone, iPad or Mac. | The Pod Pack 1 is a professional upgrade to any announce studio. The kit consists of a high-quality USB condenser microphone paired with a fully-adjustable suspension boom arm, keeping the desk clear and the microphone always in position for podcasting, on-air or voice-over applications. Assembly is a snap and the articulating boom clamps securely to nearly any desk or table surface.
- Included USB cardioid condenser microphone
- All-steel construction
- Dual suspension springs for stable angle
- Fully adjustable - microphone can even be suspended upside-down
- Clamps to nearly any desk or table
- USB cable included
- Microphone
- Element: Back electret condenser
- Element Diameter: 13mm
- Polar pattern: Cardioid
- Frequency response: 20 - 17,000 Hz
- Sensitivity: -34dB +/-2dB (0dB = 1V/Pa @ 1kHz)
- Output impedance: 100Ω +/-30% (at 1kHz)
- Load impedance: >1kΩ
- Self noise: 16dBA
- Max SPL: 132dB (@ 1kHz
- Signal to Noise ratio: 78dB
Broadcast Boom Arm
- Adjustable height and angle
- Telescoping range: 15.75" - 27.5" (40cm - 70cm)
- Weight: 13.5oz (382g)
| STUDIO CONDENSER MICROPHONE C-1U
Studio Condenser Microphone with USB Audio Interface and software suite
Professional, large-diaphragm condenser microphone with built-in USB interface, ideal for podcasters and musicians
Plug this amazing USB-mic straight into your computer and turn your PC or Mac computer into a recording system without the need for any other hardware
Directly works with your PC or Mac computer—ultra-low latency ASIO and WDM drivers for PC audio optimization included
Exceptionally flat frequency response and ultra-high sound resolution perfect for voice, acoustic instruments, etc.
Cardioid pickup pattern for outstanding sound source separation and feedback rejection
Pressure-gradient transducer with shock-mounted capsule
- Professional large-diaphragm condenser microphone with built-in 48 kHz USB interface for unsurpassed audio quality
- Gets phantom power directly from PC USB output
- Comes with Audacity audio editor, Kristal audio engine, Podifier uploading software, and Juice and Podnova downloading software
- Maximum SPL (sound pressure level) of 136 dB
- Ideal as main and support microphone for studio and live applications
- Exceptionally flat frequency response and ultra-high sound resolution
- Cardioid pickup pattern for outstanding sound source separation and feedback rejection
- Ultra low-noise transformerless FET input circuitry
- LED indicates phantom power operation
- Ultra-rugged construction with die-cast body
- USB connector and swivel stand mount included
|
Reviews
There are no reviews yet.