RODE NT-2A Multipattern Condenser Microphone

339.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
NT2-A – ?The Legend Continues? Multi Pattern 1? Condenser Microphone.   The new NT2-A carries on the tradition forged by the now legendary R?DE NT2. A professional large capsule (1?) studio microphone incorporating three-position pick-up patterns, pad and high pass filter switches conveniently located on the mic body. At the heart of the NT2-A is […]

 

Read more

NT2-A – ?The Legend Continues? Multi Pattern 1? Condenser Microphone.
 
The new NT2-A carries on the tradition forged by the now legendary R?DE NT2.
A professional large capsule (1?) studio microphone incorporating three-position
pick-up patterns, pad and high pass filter switches conveniently located on the
mic body.
At the heart of the NT2-A is the Australian designed and manufactured HF1 dual
diaphragm capsule. The frequency and transient response of this new transducer
has been voiced to complement today?s modern recording techniques, and yet still
evoke the silky smooth character of the legendary microphones of the 50?s and 60?s.
These features provide the flexibility and superlative audio characteristics that make
the NT2-A one of the most versatile condenser mics available.
The NT2-A?s variable controls allow switching between Omni, Figure 8, and Cardioid
polar patterns. The three position high-pass filter provides a flat response or an 80Hz
and 40Hz high pass filter to be selected. Finally the microphones Pad can be switched
between 0 dB, -5dB and -10dB. The NT2-A comes in a soft pouch with an M2 stand mount.
 
SPECIFICATIONS:
Features:
The Australian designed and manufactured HF1 1? edge terminated, gold sputtered, dual
5 um diaphragm capsule. 3-position variable polar pattern: Omni, Cardioid & Figure 8; all
controlled on the mic. 3-position variable high-pass filter: Flat, 80 Hz or 40 Hz. 3-position
variable pad: 0 dB, -5 dB or -10 dB. Ultra low noise, transformerless SMT circuitry. Wide
dynamic range. High strength heat-treated steel mesh head. Durable satin nickel finish.
Internal capsule shock mounting. Supplied complete with soft pouch and clip. Designed
and manufactured in Sydney, Australia.
Operation power:
The NT2-A is designed to operate from phantom power to the P48 standard. The NT2-A will
operate between 44V and 52V applied with positive polarity to pin 2 and pin 3 of the output
XLR connector.
Operation output impedance:
The NT2-A will operate satisfactorily into a load impedance as low as 1 kΩ. If a load below this
is used, the output signal level will be reduced. The NT2-A output is balanced between pin 2 (hot)
and pin 3 (cold). Pin 1 is ground.
Acoustic principle: Externally polarized 25 mm (1?) dual diaphragm.
Directional pattern: Multi-pattern
Frequency range:  20 Hz ~ 20 000 Hz
Output impedance: 200 Ω
Signal noise ratio din iec 651:
87 dB (1 kHz rel 1 Pa; per IEC651, IEC268-15)
Equvalent noise: 7 dBA SPL (per IEC651, IEC268-15)
Maximum spl:
147 dB (@ 1% THD into 1 kΩ); 157 dB (@ 1% THD into 1 kΩ) – pad at maximum
Sensitivity: -36 dB re 1 Volt/Pascal; (16 mV @ 94 dB SPL) +/-2 dB
Dynamic range din iec 651: 140 dB (per IEC651, IEC268-15)
Power supply voltage: 48 Volts (P48)
Output connection:
3 pin XLR, balanced output between; pin 2(+) and pin 3(-); Pin 1 ground
Weight with battery: 860 grm

Weight 2.90 kg

Reviews

There are no reviews yet.

Be the first to review “RODE NT-2A Multipattern Condenser Microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

RODE NT-2A Multipattern Condenser Microphone removeAKG PERCEPTION 220 CONDENSER MICROPHONE removeBEHRINGER C-2 - 2 Matched Studio Condenser Microphones removeAvantone AV-CK7 Condenser FET mic, inc shock mount, wooden mic box and metal case removeAvantone AV-CK6 Condenser FET mic, inc shock mount, wooden mic box and metal case removeSHURE KSM44A/SL - Large Dual-Diaphragm Microphone 20Hx to 20kHz remove
NameRODE NT-2A Multipattern Condenser Microphone removeAKG PERCEPTION 220 CONDENSER MICROPHONE removeBEHRINGER C-2 - 2 Matched Studio Condenser Microphones removeAvantone AV-CK7 Condenser FET mic, inc shock mount, wooden mic box and metal case removeAvantone AV-CK6 Condenser FET mic, inc shock mount, wooden mic box and metal case removeSHURE KSM44A/SL - Large Dual-Diaphragm Microphone 20Hx to 20kHz remove
Image
SKUH11RD00030PERCEPTION 220E005251AV-CK7AV-CK6KSM44SL
Rating
Price 339.00 incl. GR VAT 180.00 incl. GR VAT67.00 incl. GR VAT332.19 incl. GR VAT212.03 incl. GR VAT 938.00 incl. GR VAT
Stock

In stock

In stock

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

In stock

AvailabilityIn stockIn stockOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

NT2-A - ?The Legend Continues? Multi Pattern 1? Condenser Microphone.
 
The new NT2-A carries on the tradition forged by the now legendary R?DE NT2.
A professional large capsule (1?) studio microphone incorporating three-position
pick-up patterns, pad and high pass filter switches conveniently located on the
mic body.
At the heart of the NT2-A is the Australian designed and manufactured HF1 dual
diaphragm capsule. The frequency and transient response of this new transducer
has been voiced to complement today?s modern recording techniques, and yet still
evoke the silky smooth character of the legendary microphones of the 50?s and 60?s.
These features provide the flexibility and superlative audio characteristics that make
the NT2-A one of the most versatile condenser mics available.
The NT2-A?s variable controls allow switching between Omni, Figure 8, and Cardioid
polar patterns. The three position high-pass filter provides a flat response or an 80Hz
and 40Hz high pass filter to be selected. Finally the microphones Pad can be switched
between 0 dB, -5dB and -10dB. The NT2-A comes in a soft pouch with an M2 stand mount.
 
SPECIFICATIONS:
Features:
The Australian designed and manufactured HF1 1? edge terminated, gold sputtered, dual
5 um diaphragm capsule. 3-position variable polar pattern: Omni, Cardioid & Figure 8; all
controlled on the mic. 3-position variable high-pass filter: Flat, 80 Hz or 40 Hz. 3-position
variable pad: 0 dB, -5 dB or -10 dB. Ultra low noise, transformerless SMT circuitry. Wide
dynamic range. High strength heat-treated steel mesh head. Durable satin nickel finish.
Internal capsule shock mounting. Supplied complete with soft pouch and clip. Designed
and manufactured in Sydney, Australia.
Operation power:
The NT2-A is designed to operate from phantom power to the P48 standard. The NT2-A will
operate between 44V and 52V applied with positive polarity to pin 2 and pin 3 of the output
XLR connector.
Operation output impedance:
The NT2-A will operate satisfactorily into a load impedance as low as 1 kΩ. If a load below this
is used, the output signal level will be reduced. The NT2-A output is balanced between pin 2 (hot)
and pin 3 (cold). Pin 1 is ground.
Acoustic principle: Externally polarized 25 mm (1?) dual diaphragm.
Directional pattern: Multi-pattern
Frequency range:  20 Hz ~ 20 000 Hz
Output impedance: 200 Ω
Signal noise ratio din iec 651:
87 dB (1 kHz rel 1 Pa; per IEC651, IEC268-15)
Equvalent noise: 7 dBA SPL (per IEC651, IEC268-15)
Maximum spl:
147 dB (@ 1% THD into 1 kΩ); 157 dB (@ 1% THD into 1 kΩ) - pad at maximum
Sensitivity: -36 dB re 1 Volt/Pascal; (16 mV @ 94 dB SPL) +/-2 dB
Dynamic range din iec 651: 140 dB (per IEC651, IEC268-15)
Power supply voltage: 48 Volts (P48)
Output connection:
3 pin XLR, balanced output between; pin 2(+) and pin 3(-); Pin 1 ground
Weight with battery: 860 grm

  • One-inch large-diaphragm, true condenser cardioid transducer
  • Rugged all-metal body
  • Roadworthy construction
  • Switchable 20 dB preattenuation pad
  • Switchable bass cut filter
  • Legendary AKG sound quality
  • Designed and engineered by AKG in Vienna, Austria
  • Comes with spider-type shock mount and aluminium carrying case
The Perception 220 is a large-diaphragm true condenser microphone offering outstanding build quality and excellent value. Its many useful features and included accessories make this microphone uncommonly versatile. It delivers a classic warm, clear sound and conforms to the stringent standards defined for AKG recording products. These standards are based on AKG΄s six decades of experience in making microphones and on input from sound engineers around the world who use AKG products every day. Its 1-inch large-diaphragm true condenser transducer brings AKG studio quality to the project studio as well as all other areas of recording and live sound applications. A switchable bass cut filter and preattenuation pad make it perfectly suited even for use on loud sound sources producing sound pressure levels up to 155 dB SPL. The rugged and roadworthy design makes it also a perfect choice for on-stage applications. The Perception 220 comes with a spider-type shock mount and a rugged metal case.
Type 1" Large Diaphragm True Condenser
Polar pattern cardioid
Frequency range 20 to 20,000 Hz
Sensitivity 18 mV/Pa (-35 dBV)
Max. SPL 135 dB/155 dB (0/-20 dB) for 0.5% THD
Equivalent noise level 16 dB-A (IEC 60268-4)
Signal/noise ratio (A-weighted) 78 dB
Preattenuation pad 0 dB, -20 dB
Bass filter 12 dB/octave at 300 Hz
Impedance =1000 ohms
Current consumption
Behringer C-2 2 Matched Studio Condenser Microphones 2 Matched Studio Condenser Microphones
  • 2 matched condenser microphones for stereo studio recording and live applications
  • Ideal as main and support microphones for studio and live applications
  • Cardioid pickup pattern for effective feedback elimination
  • Low-mass diaphragm for ultra-wide frequency response and ultimate sound reproduction
  • Switchable low-frequency roll-off and input attenuation
  • Ultra low-noise transformerless FET input eliminates low-frequency distortion
Excellent Source Isolation Our C-2 mics also feature a low-frequency rolloff switch to eliminate infrasonics (mic handling noise, sound created by creaky stages), as well as a switchable -10 dB input pad to accommodate hot signals, such as a really loud vocalist or overzealous cellist. The cardioid pickup pattern provides unparalleled sound source separation and feedback rejection. C-2 mics contain ultra low-noise transformerless FET input circuitry that can handle extreme dynamics with a maximum sound pressure level of 136 dB. So even if the featured performer at your next recording session or live show happens to be a revved-up jet engine, this workhorse mic will not distort! Sound That Astounds Every stitch of these mics is designed to deliver beautiful sound. Beginning with the gold-plated 3-pin XLR connector, you get the highest signal integrity. Once connected to your system, youʼll notice these twin pro-caliber microphones have a 4 dB boost in the 1 kHz - 8 kHz range. For those of you new to condenser mics, this basically means youʼll get a slightly brighter sound that will give the perfect shape to cymbals and overhead miking. Acoustic pianos and choirs also benefit greatly from this type of frequency response. Excellent Source Isolation The cardioid pickup pattern provides unparalleled sound source separation and feedback rejection. C-2 mics contain ultra low-noise transformerless FET input circuitry that can handle extreme dynamics with a maximum sound pressure level of 136 dB. So even if the featured performer at your next recording session or live show happens to be a revved-up jet engine, this workhorse mic will not distort! Our C-2 mics also feature a low-frequency rolloff switch to eliminate infrasonics (mic handling noise, sound created by creaky stages), as well as a switchable -10 dB input pad to accommodate hot signals, such as a really loud vocalist or overzealous cellist. You Are Covered We always strive to provide the best possible Customer Experience. Our products are made in our own MUSIC Group factory using state-of-the-art automation, enhanced production workflows and quality assurance labs with the most sophisticated test equipment available in the world. As a result, we have one of the lowest product failure rates in the industry, and we confidently back it up with a generous 3-Year Warranty program.

The CK-7 houses a 35mm gold-sputtered thin Mylar capsule. The CK-7 uses high grade Polystyrene and Metalized Polypropylene capacitors in the audio path. This represents a commitment to quality, as these normally are the type of "upgrade" components that are implemented by microphone modders/hot-rodders! Any studio can proudly offer the CK-7 as a vocal mic or utility condenser due to its versatility...It exudes class visually as well as sonically.

Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability. The versatile CK-7 mic is able to produce professional results with a clean sonic character. The included Custom Retro Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results. The 3 patterns allow the CK-7 to be used in a variety of situations.

The cardioid pattern is generally best used on vocals and single instruments. The omni mode works well in incorporating some room sound into the track. The figure 8 pattern allows 2 vocalists to use the mic at the same time from opposite sides. The CK-7 has separate -10 dB pad & 80 Hz LF roll off switches....The -10dB attenuation switch can be engaged when miking very high SPL sources to keep from overloading the electronics. The 80Hz high-pass filter switch can be engaged to reduce rumble and to keep unwanted low frequencies from "muddying up" the track.

Applications.

studio vocals, acoustic guitar, mandolin, drum overheads, piano, room mic

Specifications

Type: True Condenser
Polar Pattern(s): Cardioid , Omni , Figure 8
Capsule: Dual-sided 35mm center-terminated gold-sputter Mylar (6 micron)
Frequency Response: 20-20,000 Hz +/- 3dB
Output Impedance:

The AVANTONE CK-6 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to fine studio-standard FET mics…but at a fraction of their cost!

The rugged CK-6 microphone body and capsule assembly are precision machined of Brass. Aesthetically the compact body features an elegant Metallic Cabernet Wine-Red finish, accented with polished nickel trim and capsule assembly. Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability.

This Transformerless CLASS A FET Microphone w/ 32mm gold sputtered thin Mylar capsule is designed with circuitry that will yield pleasing professional results comparable to much more expensive designs. It also features -10 dB pad  &  80 Hz LF roll off switches for varied recording situations.
 
The included Custom Retro Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results.
 
Applications

Studio vocals, acoustic guitar, mandolin, drum overheads, piano, etc…

Specifications

Type: True Transformerless Condenser
Polar Pattern: Cardioid
Frequency Response: 35-20,000 Hz +/- 3.5dB
Output Impedance:

KSM44A Multi-Pattern Dual Diaphragm Microphone Premium microphone with three polar pattern options (cardioid, omnidirectional, bidirectional).

Features

  • Prethos® Advanced Preamplifier Technology: Class A, discrete, transformerless preamplifier provides  transparency, extremely fast transient response and no crossover distortion. Minimizes harmonic and intermodulation distortions.  
  • Groundbreaking specifications: 4dB of self-noise and max SPL of 131 dB for a total dynamic range of 127 dB – an increase of 7 dB that defines the new standard for cleanly nuanced audio capture
  • Multiple polar patterns–cardioid, omnidirectional and bidirectional–for maximum flexibility in a wide variety of recording applications
  • Dual 1 inch, externally biased, ultra-thin, 2.5 μm, 24 Karat gold-layered, low mass diaphragms provide superior frequency response
  • Premium electronic components and gold-plated internal and external connectors
  • Subsonic filter eliminates rumble from mechanical vibration below 17 Hz.
  • Switchable 15 dB pad for handling extremely high sound pressure levels (SPLs)
  • 3-position switchable low-frequency filter helps reduce unwanted stand vibration noise or counteract proximity effect
  • Integrated three-stage "pop” protection grille reduces plosives and other breath noise

    Type Condenser (externally biased)
    Frequency Response 20 to 20,000 Hz
    Polar Pattern Cardioid, Omnidirectional, Bidirectional
    lmpedance 50 ohms
    Phantom power required? 11–52 V DC phantom power (IEC-61938) 5.8 mA, maximum


Weight2.90 kg1.00 kg0.90 kg0.70 kg0.60 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.90 kg
Weight 1.00 kg
Weight 0.90 kg
Weight 0.70 kg
Weight 0.60 kg
Weight 1.00 kg