RODE M-3 Condenser Cardioid Microphone

99.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: H11RD00022 Category:
Acoustic principle: Permanently polarised condenser Directional pattern: Cardioid Frequency range: 40Hz ~ 20kHz Output impedance: 200Ω Signal noise ratio din iec 651: 73dB SPL (per IEC651) Equvalent noise: 21dbA SPL (a – weighted per IEC651) Maximum spl: 142dB (@ 1kHz, 1% THD into 1kΩ load) Sensitivity: -40dB+/-3dB re 1V/Pa @ 1kHz (6.3mV/Pa @ 94db SPL) […]

 

Read more

Acoustic principle:
Permanently polarised condenser
Directional pattern:
Cardioid
Frequency range:
40Hz ~ 20kHz
Output impedance:
200Ω
Signal noise ratio din iec 651:
73dB SPL (per IEC651)
Equvalent noise:
21dbA SPL (a – weighted per IEC651)
Maximum spl:
142dB (@ 1kHz, 1% THD into 1kΩ load)
Sensitivity:
-40dB+/-3dB re 1V/Pa @ 1kHz (6.3mV/Pa @ 94db SPL)
Dynamic range din iec 651:
121dB (per IEC651)
Power supply voltage:
1.6mA (battery)/6.5mA (48V Phantom Power)
Battery life:
>200 hours
Output connection:
3 pin XLR
Weight without battery:
390g
Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “RODE M-3 Condenser Cardioid Microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

RODE M-3 Condenser Cardioid Microphone removeAKG C 430 - Cardioid Condenser Microphone removeAKG CK 33 - Cardioid Condenser Microphone removeAKG SE300B - Preamp unit removeSENNHEISER ME-67 Capsule elecret super shotgun removeRODE NT-3 MULTI POWERED 3-4 remove
NameRODE M-3 Condenser Cardioid Microphone removeAKG C 430 - Cardioid Condenser Microphone removeAKG CK 33 - Cardioid Condenser Microphone removeAKG SE300B - Preamp unit removeSENNHEISER ME-67 Capsule elecret super shotgun removeRODE NT-3 MULTI POWERED 3-4 remove
Imagerode microphone condenser m-3 cardioidAKG C 430 condenser microphone
SKUH11RD00022C 430CK 33SE 300BH10SE00022H11RD00004
Rating
Price 99.00 incl. GR VAT 156.00 incl. GR VAT 164.00 incl. GR VAT 178.00 incl. GR VAT 265.00 incl. GR VAT 250.00 incl. GR VAT
Stock

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

In stock

Only 1 left in stock (can be backordered)

AvailabilityAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderIn stockOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
Acoustic principle:
Permanently polarised condenser
Directional pattern:
Cardioid
Frequency range:
40Hz ~ 20kHz
Output impedance:
200Ω
Signal noise ratio din iec 651:
73dB SPL (per IEC651)
Equvalent noise:
21dbA SPL (a - weighted per IEC651)
Maximum spl:
142dB (@ 1kHz, 1% THD into 1kΩ load)
Sensitivity:
-40dB+/-3dB re 1V/Pa @ 1kHz (6.3mV/Pa @ 94db SPL)
Dynamic range din iec 651:
121dB (per IEC651)
Power supply voltage:
1.6mA (battery)/6.5mA (48V Phantom Power)
Battery life:
>200 hours
Output connection:
3 pin XLR
Weight without battery:
390g
Specifically designed for cymbal and overhead miking, the frequency response of the C 430 ensures a unique crisp sound. With its extremely compact external dimensions, this microphone will keep a low profile on the drum kit without compromising audio quality. Response is 20-20kHz, with 126dB max SPL, and requires phantom power. Specifications Polar Pattern: cardioid Frequency Response: 20?20.000 Hz Sensitivity: 7 mV/Pa=-43 dBV to 1 V/Pa Max. SPL for 1% / 3% THD: 126/130 dB SPL Equivalent Noise Level: 33 dB to DIN 45 412 Electrical Impedance: 200 ohms Recommended Load Impedance: >2.000 ohms Power Requirement: 9 to 52 volts universal phantom power Current Consumption: approx. 2 mA Connector : 3-pin XLR Cable Length: 1.5 m (5 ft.) Finish: matte black Size : dia.: 19 mm (0.7 in.), length: 79 mm (3.1 in.) Net / Shipping Weight: 23/192 g (0.8/6,8 oz.) Optional Accessorires: B15, B18

Technical specifications

Polar pattern

hypercardioid

Frequency range

50 to 20,000 Hz

Sensitivity

20 mV/Pa (?34 dBV)

Max. SPL

125 dB (k=1 %)

Equivalent noise level

21 dB-A

Signal/noise ratio (A-weighted)

73 dB

Impedance

600 ohms

Recommended load impedance

>2000 ohms

Supply voltage

9 to 52 V phantom power, requires DPA adapter (supplied with most Installation Modules)

Current consumption

Connector

Discreet Acoustics Modular standard

Finish

matte dark gray

Dimensions

13.5 x 20 mm dia. (0.5 dia. x 0.8 in.)

Net weight

5 g (0.17 oz.)

Shipping weight

88 g (3.1 oz.)

Accessories (included)

W 30

Transformerless Power/Output Module ? The SE 300 B is used with all AKG Blue Line capsules and operates from 9 ? 52 V phantom power. The 3-position switch allows selection of linear response, -10 dB preattenuation and 12-dB-per-octave 75 Hz low-cut filter. A stand adapter is included.

Specifications

Polar pattern: hypercardioid/directional
Frequency range: 20?20,000 Hz
Sensitivity: 25 mV/Pa (-32 dBV)
Max. SPL for 1 % THD: 124/134 dB
Equivalent noise level: 17 dB-A
Signal/noise ratio (A weighted): 77 dB
Preattenuation pad: -10 dB, switchable Bass cut filter: 12 dB/octave at 75 Hz
Electrical impedance: 200 Ohms
Recommended load impedance: >1,000 Ohms
Power requirement: 9 to 52 V phantom power to DIN 45 596
Current consumption:

The ME 67 is a long gun microphone head designed for use with the K6 and K6P powering modules. A highly directional microphone, it can be used where the microphone must be placed at a distance from the sound source. Matt black, anodised, scratch-resistant finish.

Pick-up pattern : lobar
Sensitivity in free field, no load (1kHz) : 50 mV/Pa +- 2,5 dB
Nominal impedance : 200 Ohm (K6)
Min. terminating impedance : 1000 Ohm (K6)
Equivalent noise level : 10 dB
Dimensions : d 22,5 x 343 mm
Weight : 100 g

NT3 - Versatile & Dependable Stylish and modern, the NT3 is a studio and location workhorse. With both 48V phantom and internal 9V battery operation, this R?DE is at home anywhere. Intended for studio, stage and location work, this versatile handheld or stand mounted microphone incorporates a true externally polarized condenser (hyper- cardioid polar response) transducer with an internal capsule shock mounting system, and an ultra-low noise electronic circuit that has a high immunity to R.F. interference. Incorporating a rugged welded and heat-treated mesh head and all metal body. The NT3 is supplied in a zip pouch with a windshield, stand mount and thread adaptor. SPECIFICATIONS: Acoustic principle: Externally polarised 19mm (3/4“) condenser Directional pattern:  Hypercardioid Frequency range:  20Hz-20 kHz Output impedance:  200? Signal noise ratio din iec 651:  > 77dB (per IEC268-15) Equvalent noise:  123dB (per IEC268-15) Power supply voltage: P48, P24, P12 phantom 9V battery Weight without battery:  371g Weight with battery:  680g
Weight1.00 kg0.19 kg0.30 kg0.50 kg0.10 kg2.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 0.19 kg
Weight 0.30 kg
Weight 0.50 kg
Weight 0.10 kg
Weight 2.00 kg