RODE NT-1A STUDIO CONDESER MICROPHONE BUNDLE

188.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The RODE NT1-A has become an industry standard; delivering the warmth, extended dynamic range, clarity and high SPL capability usually only featured by some of the most expensive microphones. Now available as the \’Complete Vocal Recording Solution\’ this NT1-A package now includes everything you need to get truly professional vocal recordings – the world\’s quietest […]

 

Read more

The RODE NT1-A has become an industry standard; delivering the warmth, extended dynamic range, clarity and high SPL capability usually only featured by some of the most expensive microphones.

Now available as the \’Complete Vocal Recording Solution\’ this NT1-A package now includes everything you need to get truly professional vocal recordings – the world\’s quietest studio microphone, a studio grade pop shield and shock mount, a premium 20\’ cable, dust cover, an instructional DVD with recording tips, and of course R DE\’s industry leading ten year warranty.

  • Large 1″ (25mm) capsule with gold plated diaphragm
  • Cardioid polar pattern
  • Self noise of only 5dB (A)
  • Ultra low noise, transformerless surface mount circuitry
  • Wide dynamic range
  • Gold plated output contacts
  • True condenser (externally biased)
  • Internal capsule shock mounting

Microphone Impedance: 100 Ohms Microphone Dynamic Range: > 132dB (per IEC268-15) Microphone Sensitivity: -31.9dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) Microphone Diameter: 50mm Microphone Powering: +48 Volts (Phantom Power) Physical Weight: 326.00g

Frequency Curve Image:

Weight 3.00 kg

Reviews

There are no reviews yet.

Be the first to review “RODE NT-1A STUDIO CONDESER MICROPHONE BUNDLE”

Your email address will not be published. Required fields are marked *

Quick Comparison

RODE NT-1A STUDIO CONDESER MICROPHONE BUNDLE removeAvantone AV-CK7 Condenser FET mic, inc shock mount, wooden mic box and metal case removeNEUMANN TLM-49 Condenser studio mic removeNEUMANN M-150 TUBE Condenser Tube Microphone removeAKG PERCEPTION 420 large-diaphragm condenser microphone removeRODE NT-2000 LARGE-DIAPHRAGM CONDESER MICROPHONE remove
NameRODE NT-1A STUDIO CONDESER MICROPHONE BUNDLE removeAvantone AV-CK7 Condenser FET mic, inc shock mount, wooden mic box and metal case removeNEUMANN TLM-49 Condenser studio mic removeNEUMANN M-150 TUBE Condenser Tube Microphone removeAKG PERCEPTION 420 large-diaphragm condenser microphone removeRODE NT-2000 LARGE-DIAPHRAGM CONDESER MICROPHONE remove
Image
SKUH11RD00025AV-CK7H11NE00032H11NE00026PERCEPTION 420H11RD00003
Rating
Price 188.00 incl. GR VAT332.19 incl. GR VAT 1,499.00 incl. GR VAT 6,659.00 incl. GR VAT 222.00 incl. GR VAT 529.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

In stock

Only 5 left in stock

Only 1 left in stock

In stock

AvailabilityAvailable on backorderAvailable on backorderIn stockOnly 5 left in stockOnly 1 left in stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe RODE NT1-A has become an industry standard; delivering the warmth, extended dynamic range, clarity and high SPL capability usually only featured by some of the most expensive microphones. Now available as the \'Complete Vocal Recording Solution\' this NT1-A package now includes everything you need to get truly professional vocal recordings - the world\'s quietest studio microphone, a studio grade pop shield and shock mount, a premium 20\' cable, dust cover, an instructional DVD with recording tips, and of course R DE\'s industry leading ten year warranty.
  • Large 1" (25mm) capsule with gold plated diaphragm
  • Cardioid polar pattern
  • Self noise of only 5dB (A)
  • Ultra low noise, transformerless surface mount circuitry
  • Wide dynamic range
  • Gold plated output contacts
  • True condenser (externally biased)
  • Internal capsule shock mounting
Microphone Impedance: 100 Ohms Microphone Dynamic Range: > 132dB (per IEC268-15) Microphone Sensitivity: -31.9dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) Microphone Diameter: 50mm Microphone Powering: +48 Volts (Phantom Power) Physical Weight: 326.00g Frequency Curve Image:

The CK-7 houses a 35mm gold-sputtered thin Mylar capsule. The CK-7 uses high grade Polystyrene and Metalized Polypropylene capacitors in the audio path. This represents a commitment to quality, as these normally are the type of "upgrade" components that are implemented by microphone modders/hot-rodders! Any studio can proudly offer the CK-7 as a vocal mic or utility condenser due to its versatility...It exudes class visually as well as sonically.

Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability. The versatile CK-7 mic is able to produce professional results with a clean sonic character. The included Custom Retro Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results. The 3 patterns allow the CK-7 to be used in a variety of situations.

The cardioid pattern is generally best used on vocals and single instruments. The omni mode works well in incorporating some room sound into the track. The figure 8 pattern allows 2 vocalists to use the mic at the same time from opposite sides. The CK-7 has separate -10 dB pad & 80 Hz LF roll off switches....The -10dB attenuation switch can be engaged when miking very high SPL sources to keep from overloading the electronics. The 80Hz high-pass filter switch can be engaged to reduce rumble and to keep unwanted low frequencies from "muddying up" the track.

Applications.

studio vocals, acoustic guitar, mandolin, drum overheads, piano, room mic

Specifications

Type: True Condenser
Polar Pattern(s): Cardioid , Omni , Figure 8
Capsule: Dual-sided 35mm center-terminated gold-sputter Mylar (6 micron)
Frequency Response: 20-20,000 Hz +/- 3dB
Output Impedance:

Acoustical operating principlePressure gradient transducer
Directional patternCardioid
Frequency range20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm13 mV/Pa
Rated impedance50 ohms
Rated load impedance1000 ohms
Equivalent noise level, CCIR1)23 dB
Equivalent noise level, A-weighted1)12 dB-A
Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL)71 dB
Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL)82 dB
Maximum SPL for THD 110 dB
Maximum SPL for THD 129 dB
Maximum output voltage for THD -1 dBu
Dyn. range of the mic. amplifier /A-weighted, 0.5 %2))98 dB
Dyn. range of the mic. amplifier /A-weighted, 5 %2))117 dB
Supply voltage (P48, IEC 61938)48 V ± 4 V
Current consumption (P48, IEC 61938)3.2 mA
Matching connectorXLR 3F
Weight825 g
Diameter78 mm
Length165 mm
1) According to IEC 60268-1; CCIR-weighting according to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS
2) Measured as equivalent el. input signal

Acoustical operating principlePressure transducer
Directional patternOmnidirectional
Frequency range20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm20 mV/Pa
Rated impedance50 ohms
Rated load impedance1000 ohms
Equivalent SPL CCIR 468-328 dB
Equivalent SPL DIN/IEC 65115 dB-A
S/N ratio CCIR 468-366 dB
S/N ratio DIN/IEC 65179 dB
Max. SPL (tube characteristic)K
Dynamic range (of the amplifier)K
Maximum output voltage8 dBu
Weight800 g
Diameter78 mm
Length165 mm
* THD of the microphone amplifier at an input voltage which is equivalent to the capsule output voltage at the specified SPL.
A/B, X/Y, and M/S stereo recording Ambience recording Grand piano, woodwind and brass instruments Percussions Drums Classical music recording Studio applications
  • Back-to-back large-diaphragm multi-pattern transducer
  • True condenser technology
  • High sensitivity and 155 dB maximum SPL capability
  • Switchable 20 dB preattenuation pad
  • Switchable bass cut filter
  • Legendary, pristine AKG sound quality
  • Complete with spider-type shock mount and aluminium carrying case
Type Dual-capsule,1-inch large-diaphragm, true condenser pressure-gradient microphone
Polar pattern Cardioid, omnidirectional, figure-eight
Frequency range 20 to 20,000 Hz
Sensitivity 28 mV/Pa (-31 dBV)
Max. SPL 135/155 dB SPL (0/-20 dB) for 0.5% THD
Equivalent noise level 16 dB-A (IEC 60268-4)
Signal/noise ratio (A-weighted) 78 dB
Preattenuation pad 0 dB, -20 dB
Bass filter 12 dB/octave, 300 Hz
Impedance =1000 ohms
Current consumption

NT2000 - ?Explore, Control, Create?? Seamlessly Variable Dual 1? Condenser Microphone.

The world's first large diaphragm condenser studio microphone with seamlessly variable Polar
Patterns, Filter and Pad located conveniently on the microphone body. The NT2000?s state of
the art surface-mount electronics combined with the new Australian designed and manufactured
HF1 Capsule, provide extremely low self-noise (7 dBA) and a maximum SPL of 147 dB (157 dB
with pad fully engaged) ensuring exceptional results and the ultimate in recording creativity.
The NT2000 is supplied with the SM2 Shock Mount, together in a durable custom carry case.

SPECIFICATIONS:
Acoustic principle:
Externally polarised 25 mm (1?) dual diaphragm condenser
Directional pattern: Multipattern
Frequency range:  20Hz - 20KHz
Output impedance: 200 ohms
Signal noise ratio din iec 651:  87 dB (1kHz rel 1Pa)
Equvalent noise: 7 dBA SPL (per IEC651, IEC268-15)
Maximum spl:
147 dB (@ 1% THD into 1K ohm) 157dB (@ 1% THD into 1K ohm) with pad set to maximum
Sensitivity:
-36 db re 1 Volt/Pasca (16 mv @94db SPL) +/- 2 dB
Dynamic range din iec 651: 140 dB (per IEC651, IEC268-15)
Power supply voltage: Phantom P48
Weight without battery: 831 gm
Weight with battery:  2.6 kg
 

Weight3.00 kg0.70 kg0.82 kg0.80 kg2.00 kg3.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 3.00 kg
Weight 0.70 kg
Weight 0.82 kg
Weight 0.80 kg
Weight 2.00 kg
Weight 3.00 kg