Content |
Compact directional on-camera microphone powered via Lithium-Ion batteries, 2 x AA Batteries or Micro USB with automatic power function.
Acoustic Principle: Line Gradient
Active Electronics: JFET impedance converter
Capsule: 0.55“
Polar Pattern: Supercardioid
Frequency Range: 20Hz-20kHz (selected HPF @75Hz/150Hz)
Output Impedance: 200Ω
Maximum SPL: 133dBSPL
Maximum Output Level: 7.7dBu (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity: -33.6dB re 1 Volt/Pascal (21.20mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted): 14dBA
Power Options: Internal battery, USB bus powered, AA Battery
Weight: 122g
Dimensions: 111mm x 66mm x 170mm
Output: Minijack Output
IN THE BOX:
VideoMic Pro+ Compact Directional On-camera Microphone
Micro USB cable
LB-1 Lithium-Ion Rechargeable Battery
Detachable 3.5mm TRS Cable
|
With an overall length of just 9.17" and weight of just 3.5 oz, this microphone adds virtually no heft to the end of a fish pole or the top of a minicam. Through the use of an innovative Audio-Technica design, the interference tube of the BP4073 provides a narrow acceptance angle, effective for long-distance pickup. The highly directional mics offer low self-noise and are fully RoHS-compliant - free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).
Designed for use in broadcasting, film/TV production and theater sound reinforcement applications
Direct-coupled, balanced output ensures a clean signal even in high-output conditions
Innovative acoustic design provides same directivity as mics up to 50% longer
Switchable 80 Hz hi-pass filter & 10 dB pad
Rugged housing made of lightweight structural-grade aluminum alloy
RoHS-compliant - free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)
Element: Externally polarized (DC bias) capacitor
Polar Pattern: Line + gradient
Frequency Response: 20-20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -29 dB (35.5 mV) re 1V at 1 Pa
Impedance: 50 ohms
Maximum Input Sound Level: 141 dB SPL, 1 kHz at 1% T.H.D.; 151 dB SPL, with 10 dB pad (nominal)
Dynamic Range: 128 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 81 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 48V DC, 4.8 mA typical
Weight: 99 g (3.5 oz)
Dimensions: 233.0 mm (9.17“) long, 21.0 mm (0.83“) maximum body diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8405a stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; AT8144 windscreen; two O-Rings; protective carrying case
|
This product, like the VideoMic (VM), now the worldʼs biggest selling on camera shotgun microphone, is also destined to become an Industry standard and not only offers the same sound quality & performance as itʼs predecessor, but also meets the industry demand for stereo recording.
Now videographers may use true ʽstudioʼ stereo recording techniques in the field with ease. The X/Y configuration enables the SVM to capture the true ambience of the recording space, while still offering a high level of rear rejection and low noise.
Fitted with a shoe mount, the SVM has the same low noise circuit design as the VM. The SVM offers 9V battery operation, an LED battery status indicator, a high pass filter switch, and a -10dB pad switch which allows for the mic to be used on most cameras with perfect level control.
You can also use the SVM as a remote mic on a stand, or a RØDE boom pole (Optional Accessory), which truly makes this versatile product well suited for all video applications including Electronic News Gathering (ENG), Weddings, Sports Events & Interviews.
Rode Stereo Video Mic Features - Stereo X/Y condenser microphone
- Broadcast sound quality
- Two stp high-pass filter - flat or 80 Hz
- Rugged cast aluminum body
- 9V battery operation
- Custom designed integral windshield
- Low noise circuitry
- Low handling noise
- Integral camera-shoe mount
- Includes Dead Kitten windscreen
- Acoustic Principle: Pressure Gradient
- Directional Pattern: Super Cardioid
- Frequency range: 40 Hz - 20 kHz
- Output Impedance: 200 Ohms
- Signal/Noise Ratio: 74 dB SPL (A - weighted per IEC651)
- Equivalent Noise: 20 dB SPL (A - weighted per IEC651)
- Maximum SPL: 134 dB (@ 1kHz, 1% THD into 1 Ohm load)
- Sensitivity: -38 dB re 1Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB @ 1kHz
- Power (Supply voltage): 7 mA, 9 V DC Alkaline Battery, (NSI: 1604A or IEC:6LR61)
- Battery Life: 60+ hours
- Output Connection: Stereo mini jack plug - ø3.5mm (Right Channel - Ring, Left Channel - Tip)
- Dimensions (WxHxD): 6.75 x 3.9 x 2.5 Inches (172 x 100 x 64 mm)
- Weight: .72 lbs (330 grams)
|
The length (14.53“) of the AT8035 Line + Gradient Condenser Microphone is well-suited for ENG, outdoor recording and other specialized uses. The microphone is designed for video production and broadcast (ENG/EFP) audio acquisition. Suited for both boom & handheld use, it provides the narrow acceptance angle desirable for long-distance sound pickup, featuring excellent sound rejection from the sides and rear of mic and switchable low-frequency roll-off. It operates on battery or phantom power.
Designed for video production and broadcast (ENG/EFP) audio acquisition
Length is well-suited for ENG, outdoor recording and other specialized uses
Provides the narrow acceptance angle desirable for long-distance sound pickup
Excellent sound rejection from the sides and rear of mic
Switchable low-frequency roll-off
Operates on battery or phantom power
RoHS compliant - free from all substances specified in the EU directive on hazardous substances
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Line + gradient
Frequency Response: 40-20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: Phantom: -38 dB (12.5 mV) re 1V at 1 Pa Battery: 39 dB (11.2 mV) re 1V at 1 Pa
Impedance: Phantom: 250 ohms Battery: 300 ohms
Maximum Input Sound Level: Phantom: 132 dB SPL, 1 kHz at 1% T.H.D. Battery: 120 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: Phantom: 110 dB, 1 kHz at Max SPL Battery: 98 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 72 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 11-52V DC, 2 mA typical
Battery Type: 1.5V AA/UM3
Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)
Switch: Flat, roll-off
Weight: 170 g (6.0 oz)
Dimensions: 369.0 mm (14.53“) long, 21.0 mm (0.83“) diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8405a stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; AT8132 windscreen; battery; protective carrying case
|
Element: Externally polarized (DC bias) capacitor
Polar Pattern: Line + gradient
Frequency Response: 20-18,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -29 dB (35.5 mV) re 1V at 1 Pa
Impedance: 50 ohms
Maximum Input Sound Level: 141 dB SPL, 1 kHz at 1% T.H.D.; 151 dB SPL, with 10 dB pad (nominal)
Dynamic Range: 128 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 81 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 48V DC, 4.8 mA typical
Weight: 175 g (6.2 oz)
Dimensions: 539.0 mm (21.22“) long, 21.0 mm (0.83“) maximum body diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8405a stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; AT8147 windscreen; two O-Rings; protective carrying case
| The R?DE VideoMic is a professional grade shotgun microphone. Based on the
latest ?Film industry? technology, the VideoMic is designed specifically for use with
high quality Digital Video Cameras.
The microphone exhibits low noise and an unusually wide bandwidth for its size. It
is ultra lightweight, yet rugged due to it?s ABS construction. The VideoMic is powered
by a standard 9 V battery and offers a Low Battery LED status indicator and a
switchable high pass filter to reduce unwanted low frequency rumble.
The VideoMic attaches to any Camcorder that has the standard camera-shoe fitting
and utilizes a stereo mini jack for audio output.
SPECIFICATIONS:
Features:
Studio recording quality. Rugged fibre-reinforced ABS construction. 9 V battery operation.
Custom designed integral wind shield. Condenser Microphone. Low noise circuitry. Low
handling noise. Integral camera-shoe mount. Designed & manufactured in Australia.
Full 2 year guarantee.
Operation power:
The VideoMic is designed to operate from a 9 V battery (ANSI:1604A or IEC:6LR61).
The battery is conveniently located within the support arm of the microphone. A fully
removable access cover and a 1-way insertion mechanism ensure ease of loading.
The battery will provide more than 100 hrs. of continuous use due to a low consumption
of only 5.0 mA.
Operation output impedance:
The microphone will operate satisfactorily into a load impedance as low as 1 k?.
If a load below this is used, the output signal level will be reduced.
Acoustic principle: Line plus Gradient
Directional pattern: Super-Cardioid
Frequency range:
40 Hz ~ 20 000 Hz selectable HPF @ 80 Hz/12 dB/octave
Output impedance: 200 Ω
Signal noise ratio din iec 651:
74 dB (1 kHz rel 1 Pa; per IEC651, IEC268-15)
Equvalent noise: 20 dB SPL (per IEC651, IEC268-15)
Maximum spl: 134 dB (@ 1% THD into 1 kΩ)
Sensitivity:
-38 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in free field into open circuit)
Dynamic range din iec 651: 114 dB (per IEC651, IEC268-15)
Power supply voltage:
9 V DC Alkaline Battery (ANSI:1604A or IEC:6LR61)
Current consumption: 5 mA
Battery life: >100 hours
Output connection: Stereo mini jack plug - ?3.5 mm.
Weight: 176 grm.
Dimensions width: 250mm
Dimensions depth: 65mm
Dimensions height: 102mm |
Reviews
There are no reviews yet.