RODE VideoMic Pro Rycote

229.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
RODE VideoMic Pro Rycote All new capsule with lower noise and higher sensitivity Compact form factor (150mm) 9V battery powered – over 70 hours use (alkaline) Integrated foam windscreen Two step High Pass Filter (flat, 80Hz) Camera shoe mount with 3/8″ thread for easy boompole mounting Rycote Lyre shock mounting onboard Broadcast recording quality condenser […]

 

Read more

RODE VideoMic Pro Rycote

  • All new capsule with lower noise and higher sensitivity
  • Compact form factor (150mm)
  • 9V battery powered – over 70 hours use (alkaline)
  • Integrated foam windscreen
  • Two step High Pass Filter (flat, 80Hz)
  • Camera shoe mount with 3/8″ thread for easy boompole mounting
  • Rycote Lyre shock mounting onboard
  • Broadcast recording quality condenser microphone
  • Ultra lightweight (85g)
  • Integrated shock mounting
  • 3.5mm stereo mini-jack output (dual mono)
  • Three position level control (-10dB, 0, +20dB)
  • 10 year warranty with online registration at www.rodemic.com/warranty
Weight 3.00 kg

Reviews

There are no reviews yet.

Be the first to review “RODE VideoMic Pro Rycote”

Your email address will not be published. Required fields are marked *

Quick Comparison

RODE VideoMic Pro Rycote removeRODE NT-G1 Condenser shortgun microphone removeAUDIO TECHNICA AT875R SHOTGUN BROADCASTING MICROPHONE WITH BATTERY removeEDIROL CS-50 Stereo Shotgun Condenser Broadcast Microphone removeRODE RODELink Filmmaker Kit removeAUDIO TECHNICA BP4071L BROADCASTING MICROPHONE 21.22" long remove
NameRODE VideoMic Pro Rycote removeRODE NT-G1 Condenser shortgun microphone removeAUDIO TECHNICA AT875R SHOTGUN BROADCASTING MICROPHONE WITH BATTERY removeEDIROL CS-50 Stereo Shotgun Condenser Broadcast Microphone removeRODE RODELink Filmmaker Kit removeAUDIO TECHNICA BP4071L BROADCASTING MICROPHONE 21.22" long remove
Image
SKUH11RD00051H11RD00009AT875RCS50H11RD00049BP4071L
Rating
Price 229.00 incl. GR VAT 220.00 incl. GR VAT 163.80 incl. GR VAT 486.27 incl. GR VAT 319.00 incl. GR VAT 1,134.00 incl. GR VAT
Stock

Out of stock

In stock

In stock

Only 5 left in stock

Only 1 left in stock (can be backordered)

In stock

AvailabilityOut of stockIn stockIn stockOnly 5 left in stockOnly 1 left in stock (can be backordered)In stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

RODE VideoMic Pro Rycote

  • All new capsule with lower noise and higher sensitivity
  • Compact form factor (150mm)
  • 9V battery powered - over 70 hours use (alkaline)
  • Integrated foam windscreen
  • Two step High Pass Filter (flat, 80Hz)
  • Camera shoe mount with 3/8" thread for easy boompole mounting
  • Rycote Lyre shock mounting onboard
  • Broadcast recording quality condenser microphone
  • Ultra lightweight (85g)
  • Integrated shock mounting
  • 3.5mm stereo mini-jack output (dual mono)
  • Three position level control (-10dB, 0, +20dB)
  • 10 year warranty with online registration at www.rodemic.com/warranty

The new RODE NTG-1 is a lightweight condenser shotgun microphone, specifically
designed for professional applications within the film, video, television, voice-over and
ENG industries.
The NTG-1 provides an electronically balanced output stage and operates on 48 V to
the P48 standard. The NTG-1 offers wide bandwidth and a controlled polar response
coupled with low noise SMT electronics. The NTG-1 is extremely lightweight making it
ideal for mounting directly to video cameras (with optional accessories) or a Boom pole.
The NTG-1 comes complete with mount and windshield. The supplied windscreen effectively
suppresses wind noise when recording outdoors in moderate conditions. Optional accessories
are available for more demanding applications.

SPECIFICATIONS:
Features:
Broadcast sound quality. Low noise circuitry. Condenser transducer. Rugged metal construction.
Low weight: 105 grams approx. . Low handling noise. Supplied with stand mount, zip pouch and
windshield. Designed & manufactured in Australia. Full 2 year guarantee.
Operation power:
The NTG-1 is designed to operate from standard P48 phantom power. The NTG-1 will
operate between 44 V to 52 V applied with positive polarity to pin 2 and pin 3 via the
output XLR connector.
Operation output impedance:
The NTG-1 will operate satisfactorily into a load impedance as low as 1 k§?. If a load below
this is used, the output signal level will be reduced. The NTG-1??s output is balanced between
pin 2 (hot), pin 3 (cold) and pin 1 is ground.
Acoustic principle: Line plus Gradient.
Directional pattern: Super-Cardioid.
Frequency range:
20 Hz ~ 20 kHz selectable HPF @ 80 Hz/12 dB octave
Output impedance:  50 ?
Signal noise ratio din iec 651:
76 dB (1 kHz rel. 1 Pa; per IEC651, IEC268-15)
Equvalent noise: 18 dB SPL (per IEC651, IEC268-15)
Maximum spl: 139 dB (@ 1% THD into 1 k?)
Sensitivity:
-36 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in free field into open circuit)
Dynamic range din iec 651: 121 dB (per IEC651, IEC268-15)
Power supply voltage:  P48 Phantom, 44 V to 52 V
Current consumption:  3.5 mA
Output connection:
3 pin XLR, balanced output between pin 2 (+), pin 3 (-) and pin 1 (ground)
Weight with battery:  105 g approx. 
Dimensions width:  217mm
Dimensions depth:  22mm
Dimensions height: 22mm

Audio-Technica's AT875R is designed for video production and broadcast (ENG/EFP) audio acquisition. Audio-Technica's shortest shotgun microphone, it mounts conveniently on a DV camcorder without adding noticeable heft, and is ideal for use with compact digital cameras. This high-performance microphone offers a narrow acceptance angle of line + gradient design. It also features smooth, natural-sounding on-axis audio quality and excellent off-axis rejection of sound arriving from the sides and rear of mic.

Designed for video production and broadcast (ENG/EFP) audio acquisition
Extremely short length (under 7“) ideal for use with compact digital cameras
Provides the narrow acceptance angle desirable for long-distance sound pickup
Excellent sound rejection from the sides and rear of mic
Tailored response minimizes camera and handling noise
Operates on phantom power only
RoHS compliant free from all substances specified in the EU directive on hazardous substances

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Line + gradient
Frequency Response: 90-20,000 Hz
Open Circuit Sensitivity: 30 dB (31.6 mV) re 1V at 1 Pa
Impedance: 100 ohms
Maximum Input Sound Level: 127 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 107 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 74 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 11-52V DC, 2 mA typical
Weight: 80 g (2.8 oz)
Dimensions: 175.0 mm (6.89“) long, 21.0 mm (0.83“) diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8405a stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; windscreen; soft protective pouch

 

The CS-50 is a compact, light-weight stereo condenser microphone designed for the R-4 and R-4 Pro, videographer, broadcaster, and sound designer. The CS-50 features bass roll-off capability as well as selectable wide stereo or narrow (focused) polar patterns.

From Edirol, the CS-50 Stereo Microphone is designed for use with the Edirol/Roland R4 portable digital field recorder. The microphone features wide stereo and narrow polar patterns. The wide stereo pattern reproduces audio with accurate stereo imaging while the mono pattern is focused and reduces signal at the sides of the capsule. The CS-50 features a low frequency roll-off switch for eliminating hum and low-frequency noise due to wind or proximity effect. A dual XLR output cable is supplied.

Wide Stereo PatternThe wide stereo pattern provides a generous pick up area while reproducing signal with accurate stereo placement. This setting is ideal for ambiance capturing, live music, sound effects, etc.Mono (Narrow) PatternThe narrow pattern provides a focused pick up at the front end of the capsule. The result is an accurate signal without noise at the off-axis sections of the capsule.Low Frequency Roll-OffThe low-frequency roll-off switch eliminates hum and low-frequency noise due to wind, handling and proximity effect.Light Weight ProfileThe light weight, slim profile make the CS-50 ideal for location use while mounted on a boom, pistol grip or camera.

What's in the Box:

  • Windscreen
  • Desktop Prop
  • Mic Stand Adapter
  • L/R XLR Cable 6.56 feet (2m)
  • Soft case
  • 1 Year Warranty
  Specifications:
ransducer Back Electret Condenser
Polar Pattern Line Cardioid
Frequency Response

50 - 20,000Hz

Open Circuit Sensitivity14.9 mV/Pa, -36.5 dBV @ 1 Pa
Dynamic Range (Typical) Not Specified by Manufacturer
Signal-to-Noise Ratio Greater than 70dB (at 1kHz/1Pa)
Maximum Input Sound Level 126dB S.P.L (at 1kHz, 1% T.H.D. Typical)
Power Requirements 48V Phantom x 2ch
Output Impedance 200 Ohms
Current Consumption3.8 mA (Typical)
Output Connectors 3-pin XLR
Pad No
Low Frequency Roll-Off Yes
Dimensions Not Specified by Manufacturer
Weight 2.92 oz (83g)

 


OLED display (on receiver) One button pairing Three level gain control AA battery or USB powered Includes RØDE\'s broadcast Lavalier microphone RØDELink represents the next generation of digital wireless systems. Using a series II 2.4GHz digital transmission with 128-bit encryption, it is able to constantly monitor and hop between frequencies to maintain the strongest possible signal level at a range of up to 100 metres (over 100 yards). The RØDELink Filmmaker Kit provides everything you need to start shooting video wirelessly, including a receiver, transmitter and broadcast-grade lavalier microphone. The receiver (RX-CAM) features an OLED display with information on level, battery status (receiver and transmitter), mute and channel selection. The unit can be mounted on a standard camera shoe mount, 3/8" thread or belt-clip, and for added versatility the shoe mount can be located in one of two positions. The lightweight transmitter (TX-BELT) can be fitted to a belt or clothing and features a locking thread to ensure the microphone connection is as secure as possible. RØDEʼs omnidirectional Lavalier microphone is included in the kit to provide the highest possible audio reproduction quality. RØDELink Filmmaker Kit Specifications Transmission type    2.4GHz Fixed Frequency Agile System System dynamic range    112dB Range (distance)    100m Frequency range    35Hz - 22kHz Maximum output level    1v Rms (2.8v P-p) Max input signal level    1v Rms (2.8v P-p) Max latency    4ms Receiver (RX-CAM) Power source    2 X AA Battery Or MicroUSB Antenna    Internal Output connection    3.5mm TRS Locking Jack Socket - Dual Mono Output impedance    300Ω Dimensions    111mm X 65mm X 52mm Weight    190gm Transmitter (TX-BELT) Power source    2 X AA Battery Or MicroUSB Antenna    Internal Output connection    3.5mm TRS Locking Jack Socket Output impedance    10kΩ Dimensions    111mm X 65mm X 40mm Weight    190gm Lavalier Acoustic Principle    Pressure Gradient Active Electronics    JFET impedance converter Capsule    0.10“ Address Type    End Frequency Range    60Hz - 18kHz Output Impedance    3000Ω Maximum SPL    110dB SPL (@ 1kHz, 1% THD into 1KΩ load) Maximum Output Level    189.0dBu (@ 1kHz, 1% THD into 1KΩ load Sensitivity    -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted)    25dB-A Weight    1.00gm Dimensions    12.00mmH x 4.50mmW x 4.50mmD Warranty    10 year warranty

Element: Externally polarized (DC bias) capacitor
Polar Pattern: Line + gradient
Frequency Response: 20-18,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -29 dB (35.5 mV) re 1V at 1 Pa
Impedance: 50 ohms
Maximum Input Sound Level: 141 dB SPL, 1 kHz at 1% T.H.D.; 151 dB SPL, with 10 dB pad (nominal)
Dynamic Range: 128 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 81 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 48V DC, 4.8 mA typical
Weight: 175 g (6.2 oz)
Dimensions: 539.0 mm (21.22“) long, 21.0 mm (0.83“) maximum body diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8405a stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; AT8147 windscreen; two O-Rings; protective carrying case

Weight3.00 kg1.50 kg0.30 kg0.10 kg0.42 kg0.30 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 3.00 kg
Weight 1.50 kg
Weight 0.30 kg
Weight 0.10 kg
Weight 0.42 kg
Weight 0.30 kg