RODE VideoMicro Condenser Microphone

59.00 incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The VideoMicro is a compact microphone designed to improve the audio quality of your videos. It incorporates a high-quality cardioid condenser microphone capsule for great quality audio recordings when used with a wide range of cameras. A directional microphone, the VideoMicro reduces distracting peripheral sounds and focusses on the audio in front of the camera. […]

 

Read more

The VideoMicro is a compact microphone designed to improve the audio quality of your videos. It incorporates a high-quality cardioid condenser microphone capsule for great quality audio recordings when used with a wide range of cameras. A directional microphone, the VideoMicro reduces distracting peripheral sounds and focusses on the audio in front of the camera. Its pickup is more forgiving than RODEʼs other on-camera microphones providing a more natural sound when recording indoors. Perfect for capturing incredible audio to accompany inspiring vision. The microphone body is made from aluminum, giving it a high level of RF rejection, and is finished in RODEʼs high-grade ceramic anti-glare black coating. Included with the VideoMicro is a camera shoe mount featuring a Rycote Lyre shock mount. Featuring a suspension structure composed of a hard-wearing thermoplastic, it is far more effective at minimising unwanted vibrations, handling and cable-borne noise than traditional elastic suspensions. Virtually indestructible, the Rycote Lyre will never sag, snap, wear out or require rethreading to maintain its effectiveness. Also included is the WS9 synthetic furry wind shield with foam inner cell, designed for use in outdoor scenarios where wind and environmental noise can inhibit recordings. Optionally available is the RODE SC7, a TRS to TRRS cable that allows the VideoMicro to be used with smartphones, to capture crystal clear, directional sound for video and video applications such as Periscope.

Compact size and lightweight – only 80mm (3ʼ) long and 42gm (1.5oz)

All-metal microphone body

No battery required (powered by camera plug-in power – min 3V)

Rycote® Lyre® shock mount included

Deluxe furry windshield included

Designed and manufactured in Australia

The camera of the photograph is not included.

Weight 0.8 kg

Reviews

There are no reviews yet.

Be the first to review “RODE VideoMicro Condenser Microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

RODE VideoMicro Condenser Microphone removeAUDIO TECHNICA AT897 SHOTGUN BROADCASTING MICROPHONE WITH BATTERY removeRODE Stereo Video Mic SVM STEREO Condenser Camera Microphone removeAUDIO TECHNICA BP892cW-TH BROADCAST HEAD MICROPHONE removeRODE RODELink Filmmaker Kit removeRODE NT-G2 DUAL POWERED DIRECTIONAL CONDESER MICROPHONE remove
NameRODE VideoMicro Condenser Microphone removeAUDIO TECHNICA AT897 SHOTGUN BROADCASTING MICROPHONE WITH BATTERY removeRODE Stereo Video Mic SVM STEREO Condenser Camera Microphone removeAUDIO TECHNICA BP892cW-TH BROADCAST HEAD MICROPHONE removeRODE RODELink Filmmaker Kit removeRODE NT-G2 DUAL POWERED DIRECTIONAL CONDESER MICROPHONE remove
Image
SKUH11RD00053AT897H11RD00019BP892cW-THH11RD00049H11RD00010
Rating
Price 59.00 incl. GR VAT 240.00 incl. GR VAT 119.00 incl. GR VAT 304.01 incl. GR VAT 319.00 incl. GR VAT 269.00 incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

In stock

In stock

In stock

Only 1 left in stock (can be backordered)

In stock

AvailabilityOnly 1 left in stock (can be backordered)In stockIn stockIn stockOnly 1 left in stock (can be backordered)In stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The VideoMicro is a compact microphone designed to improve the audio quality of your videos. It incorporates a high-quality cardioid condenser microphone capsule for great quality audio recordings when used with a wide range of cameras. A directional microphone, the VideoMicro reduces distracting peripheral sounds and focusses on the audio in front of the camera. Its pickup is more forgiving than RODEʼs other on-camera microphones providing a more natural sound when recording indoors. Perfect for capturing incredible audio to accompany inspiring vision. The microphone body is made from aluminum, giving it a high level of RF rejection, and is finished in RODEʼs high-grade ceramic anti-glare black coating. Included with the VideoMicro is a camera shoe mount featuring a Rycote Lyre shock mount. Featuring a suspension structure composed of a hard-wearing thermoplastic, it is far more effective at minimising unwanted vibrations, handling and cable-borne noise than traditional elastic suspensions. Virtually indestructible, the Rycote Lyre will never sag, snap, wear out or require rethreading to maintain its effectiveness. Also included is the WS9 synthetic furry wind shield with foam inner cell, designed for use in outdoor scenarios where wind and environmental noise can inhibit recordings. Optionally available is the RODE SC7, a TRS to TRRS cable that allows the VideoMicro to be used with smartphones, to capture crystal clear, directional sound for video and video applications such as Periscope.

Compact size and lightweight - only 80mm (3ʼ) long and 42gm (1.5oz) All-metal microphone body No battery required (powered by camera plug-in power - min 3V) Rycote® Lyre® shock mount included Deluxe furry windshield included Designed and manufactured in Australia

The camera of the photograph is not included.

Audio-Technica's AT897 is designed for field audio acquisition in film/TV/video production, professional recording, wildlife recording and broadcast applications. It mounts conveniently on a DV camcorder without adding noticeable heft, and remains out of the frame even with compact digital cameras. This high-performance short shotgun offers outstanding long-distance audio pickup due to narrow acceptance angle of line + gradient design. It also features smooth, natural-sounding on-axis audio quality and excellent off-axis rejection of sound arriving from the sides and rear of mic.

Designed for video production and broadcast (ENG/EFP) audio acquisition
Short length (11“) ensures mic stays out of the shot -- even when used with compact digital cameras
Smooth, natural-sounding on-axis audio quality
Provides the narrow acceptance angle desirable for long-distance sound pickup
Excellent sound rejection from the sides and rear of mic
Switchable low-frequency roll-off
Operates on battery or phantom power
RoHS compliant - free from all substances specified in the EU directive on hazardous substances

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Line + gradient
Frequency Response: 20-20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: Phantom: -40 dB (10.0 mV) re 1V at 1 Pa Battery: -41 dB (8.9 mV) re 1V at 1 Pa
Impedance: Phantom: 200 ohms Battery: 300 ohms
Maximum Input Sound Level: Phantom: 129 dB SPL, 1 kHz at 1% T.H.D. Battery: 115 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: Phantom: 112 dB, 1 kHz at Max SPL Battery: 98 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 77 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 11-52V DC, 2 mA typical
Battery Type: 1.5V AA/UM3
Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)
Switch: Flat, roll-off (recessed)
Weight: 5.1 oz (145 g)
Dimensions: 10.98" (279.0 mm) long, 0.83" (21.0 mm) diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8405a stand clamp for 5/8“-27 threaded stands; AT8134 windscreen; battery; 5/8“-27 to 3/8“-16 threaded adapter; protective carrying case

This product, like the VideoMic (VM), now the worldʼs biggest selling on camera shotgun microphone, is also destined to become an Industry standard and not only offers the same sound quality & performance as itʼs predecessor, but also meets the industry demand for stereo recording.

Now videographers may use true ʽstudioʼ stereo recording techniques in the field with ease. The X/Y configuration enables the SVM to capture the true ambience of the recording space, while still offering a high level of rear rejection and low noise.

Fitted with a shoe mount, the SVM has the same low noise circuit design as the VM. The SVM offers 9V battery operation, an LED battery status indicator, a high pass filter switch, and a -10dB pad switch which allows for the mic to be used on most cameras with perfect level control.

You can also use the SVM as a remote mic on a stand, or a RØDE boom pole (Optional Accessory), which truly makes this versatile product well suited for all video applications including Electronic News Gathering (ENG), Weddings, Sports Events & Interviews. Rode Stereo Video Mic Features

  • Stereo X/Y condenser microphone
  • Broadcast sound quality
  • Two stp high-pass filter - flat or 80 Hz
  • Rugged cast aluminum body
  • 9V battery operation
  • Custom designed integral windshield
  • Low noise circuitry
  • Low handling noise
  • Integral camera-shoe mount
  • Includes Dead Kitten windscreen
   
  • Acoustic Principle: Pressure Gradient
  • Directional Pattern: Super Cardioid
  • Frequency range: 40 Hz - 20 kHz
  • Output Impedance: 200 Ohms
  • Signal/Noise Ratio: 74 dB SPL (A - weighted per IEC651)
  • Equivalent Noise: 20 dB SPL (A - weighted per IEC651)
  • Maximum SPL: 134 dB (@ 1kHz, 1% THD into 1 Ohm load)
  • Sensitivity: -38 dB re 1Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB @ 1kHz
  • Power (Supply voltage): 7 mA, 9 V DC Alkaline Battery, (NSI: 1604A or IEC:6LR61)
  • Battery Life: 60+ hours
  • Output Connection: Stereo mini jack plug - ø3.5mm (Right Channel - Ring, Left Channel - Tip)
  • Dimensions (WxHxD): 6.75 x 3.9 x 2.5 Inches (172 x 100 x 64 mm)
  • Weight: .72 lbs (330 grams)
 

Audio-Technicaʼs high-SPL BP892 MicroSet® offers the ultimate in low-profile, high-performance audio. Delivering clear and accurate sound in an inconspicuous package, the ultra-lightweight BP892 hooks securely behind either ear and can be worn for hours without fatigue. For maximum stability and comfort, the included AT8464 dual-ear microphone mount converts the MicroSet to a dual-ear-worn unit.

The microphone features a flat, extended frequency response and other outstanding performance specifications, resulting in extremely intelligible, natural audio for stage and television talent, lecturers and houses of worship. Protected by a highly durable Parylene coating, the new headworn mic is built to stand up to the rigors of day-to-day use.

Handles high sound pressure levels with ease
Extremely intelligible natural audio
Inconspicuous, lightweight headset with capsule diameter of just 2.6 mm is ideal for applications requiring minimum visibility
Ergonomic under-ear design—flexible, lightweight contoured loop hooks behind the ear for an ultra-secure, comfortable fit with or without glasses
Comes equipped with AT8464 Dual-Ear Microphone Mount that converts single ear-worn MicroSet to a dual-ear-worn unit for maximum stability and comfort
High-pass filter on power module provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Omnidirectional
Frequency Response: 20-20,000 Hz
Low Frequency Roll-Off: 80 Hz, 18 dB/octave (wired only)
Open Circuit Sensitivity: –49 dB (3.5 mV) re 1V at 1 Pa
Impedance: 250 ohms (wired only)
Maximum Input Sound Level: 135 dB SPL, 1 kHz at 3% T.H.D.
Dynamic Range: (Typical)    104 dB, 1 kHz at Max SPL (wired only)
Signal-To-Noise Ratio: 63 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 2 mA typical (wired only)
Switch: Flat, roll-off (wired only)
Current Consumption: 0.1 mA typical at 5V (wireless only)
Voltage Range: 2.5-11V (wireless only)
Weight (Microphone):    Microphone, boom & earpiece: 2.6 g (0.09 oz)
Weight (Power Module): 85 g (3.0 oz) (wired only)
Dimensions Microphone: 8.1 mm (0.32“) long, 2.6 mm (0.10“) diameter Boom: 98.4 mm (3.87“) long, 1.07 mm (0.04“) diameter
Dimensions (Power Module)@ 97.6 mm (3.84“) long, 18.9 mm (0.74“) diameter (wired only)
Output Connector: (Power Module)    Integral 3-pin XLRM-type
Cable: 1.4 m (55“) long (permanently attached to microphone), 1.6 mm (0.06“) diameter, 2-conductor shielded cable with locking 4-pin connector (wired only)
Accessories Furnished: BP892: AT8539 power module (wired only); AT8464 dual-ear microphone mount; AT8440 cable clip; two AT8157 windscreens; two AT8156 element covers; moisture guard; belt clip (wired only); carrying case BP892-TH: AT8539 power module (wired only); AT8464-TH dual-ear microphone mount; AT8440 cable clip; two AT8157-TH windscreens; two AT8156-TH element covers; moisture guard; belt clip (wired only); carrying case
Audio-Technica Case Style: M31

OLED display (on receiver) One button pairing Three level gain control AA battery or USB powered Includes RØDE\'s broadcast Lavalier microphone RØDELink represents the next generation of digital wireless systems. Using a series II 2.4GHz digital transmission with 128-bit encryption, it is able to constantly monitor and hop between frequencies to maintain the strongest possible signal level at a range of up to 100 metres (over 100 yards). The RØDELink Filmmaker Kit provides everything you need to start shooting video wirelessly, including a receiver, transmitter and broadcast-grade lavalier microphone. The receiver (RX-CAM) features an OLED display with information on level, battery status (receiver and transmitter), mute and channel selection. The unit can be mounted on a standard camera shoe mount, 3/8" thread or belt-clip, and for added versatility the shoe mount can be located in one of two positions. The lightweight transmitter (TX-BELT) can be fitted to a belt or clothing and features a locking thread to ensure the microphone connection is as secure as possible. RØDEʼs omnidirectional Lavalier microphone is included in the kit to provide the highest possible audio reproduction quality. RØDELink Filmmaker Kit Specifications Transmission type    2.4GHz Fixed Frequency Agile System System dynamic range    112dB Range (distance)    100m Frequency range    35Hz - 22kHz Maximum output level    1v Rms (2.8v P-p) Max input signal level    1v Rms (2.8v P-p) Max latency    4ms Receiver (RX-CAM) Power source    2 X AA Battery Or MicroUSB Antenna    Internal Output connection    3.5mm TRS Locking Jack Socket - Dual Mono Output impedance    300Ω Dimensions    111mm X 65mm X 52mm Weight    190gm Transmitter (TX-BELT) Power source    2 X AA Battery Or MicroUSB Antenna    Internal Output connection    3.5mm TRS Locking Jack Socket Output impedance    10kΩ Dimensions    111mm X 65mm X 40mm Weight    190gm Lavalier Acoustic Principle    Pressure Gradient Active Electronics    JFET impedance converter Capsule    0.10“ Address Type    End Frequency Range    60Hz - 18kHz Output Impedance    3000Ω Maximum SPL    110dB SPL (@ 1kHz, 1% THD into 1KΩ load) Maximum Output Level    189.0dBu (@ 1kHz, 1% THD into 1KΩ load Sensitivity    -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted)    25dB-A Weight    1.00gm Dimensions    12.00mmH x 4.50mmW x 4.50mmD Warranty    10 year warranty

The new RODE NTG-2 is a lightweight condenser shotgun microphone, designed
for professional applications within the film, video, television and production industries.
The NTG-2 provides a balanced low impedance output stage and operates either
from an internal 1.5 V battery (AA) or 48 V to the P48 standard. A wide bandwidth
and controlled polar response coupled with low noise SMT electronics, makes the
NTG-2 the perfect choice for film, video engineering and voice-over work. The NTG-2
is extremely lightweight making it ideal for mounting directly to video cameras or on
boom poles.
The NTG-2 comes complete with mount and windshield.The windscreen effectively
suppresses wind noise when recording outdoors in moderate conditions.

SPECIFICATIONS:
Features:
Broadcast sound quality. Rugged metal construction. Condenser microphone transducer.
Weighing 161 grams approx. . Low noise circuitry. Low handling noise. Supplied with stand
mount and zip pouch. Designed & manufactured in Australia. Full 2 year guarantee.
Operation power:
The NTG-2 is designed to operate from standard P48 phantom power or a 1.5 V Alkaline Battery.
The NTG-2 will operate between 44 V to 52 V applied with positive polarity to pin 2 and pin 3 via
the output XLR connector.
Operation output impedance:
The NTG-2 will operate satisfactorily into a load impedance as low as 1 k§?. If a
load below this is used, the output signal level will be reduced. The NTG-2??s
output is balanced between pin 2 (hot) and pin 3 (cold). Pin 1 is ground.
Acoustic principle:  Line plus Gradient.
Directional pattern:  Super-Cardioid.
Frequency range:
20 Hz ~ 20 kHz selectable HPF @ 80 Hz/12 dB octave
Output impedance: 250 ? - phantom power, 350 ? - battery power
Signal noise ratio din iec 651:
76 dB (1 kHz rel. 1 Pa; per IEC651, IEC268-15)
Equvalent noise: 18 dB SPL (per IEC651, IEC268-15)
Maximum spl:  131 dB (@ 1% THD into 1 k?)
Sensitivity:
-36 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in free field into open circuit)
Dynamic range din iec 651: 113 dB (per IEC651, IEC268-15)
Power supply voltage: 1.5 V Alkaline Battery or P48 Phantom
Current consumption:  2.0 mA
Battery life:  >400 hours with fresh alkaline battery.
Output connection:
3 pin XLR, balanced output between pin 2(+), 3(-) and Pin 1 (ground)
Weight with battery: 161 g approx.
Dimensions width:  278 mm
Dimensions depth:  22mm
Dimensions height:  22mm
 

Weight0.8 kg0.30 kg0.50 kg0.30 kg0.42 kg2.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.8 kg
Weight 0.30 kg
Weight 0.50 kg
Weight 0.30 kg
Weight 0.42 kg
Weight 2.00 kg