ROTH AudioBlob 2.1 Set Loudspeaker 2+1 Multimedia monitor

The new Roth Audioblob2 multimedia audio system is an idea partner for PC or Mac based music/multimedia systems.  This system has been developed in partnership with audio engineers from Tannoy, with many years experience in designing the very best home audio systems.

Audioblob2 provides superlative audio quality for music/multimedia & gaming and is configured so that you can control the overall audio volume and the sub-bass level separately, thereby providing subtle and discreet volume control, up to an annoy-your-neighbours, floor-shaking level 10 - The choice is yours !

Included Accessories:

• 6 x shallow satellite feet
• 4 x deep satellite feet
• 4 x subwoofer feet
• 2 x phono to bare wire satellite speaker cables
• 1 x 3.5mm to phono input cable

Specifications:

• Satellites
• Sensitivity (2.83V @ 1m): 85dB
• Frequency response (-6dB): 80Hz – 56kHz
• Crossover frequency: 7.7kHz (mid to high)
• 80Hz (to subwoofer)
• Drivers: HF 15mm (5/8”) mylar dome,
• Neodymium magnet system.
• LF 75mm (3”) paper cone
• Nominal impedance: 8 ohm
• Magnetic shielding: yes
• Finish White
• Dimensions (H x W x D) 140 x 97 x 95mm (5 1/2 x 3 4/5 x 4 5/16”)
• Weight 1.5kg (3.3lbs)

Subwoofer

• Power output – Watts (RMS) 12 to satellite
• 28 to subwoofer
• Frequency response (-6dB): 42Hz – 80Hz
• Driver: 165mm (6 1/2 ") paper cone
• Auxiliary bass radiator: 165mm (6 1/2 ") paper cone
• Inputs: 2 x phono to 3.5mm stereo jack lead provided
• Outputs to satellites: 2 x phono
• Power requirements: 230V AC, 50Hz, 100VA max.
• Finish White
• Dimensions (H x W x D), incl. feet 290 x 220 x 280mm (11 3/8 x 8 11/16 x 11ins)
• Weight 5.5kg (12.1lbs)

The compact LSR6325P-1 provides exceptional performance for use in applications
where accuracy is a must, but space is limited. With a 5.25 in. high-excursion woofer,
a damped titanium composite tweeter, and 150 Watts of amplification, it outperforms
many larger systems. When used with the LSR6312SP Subwoofer, the LSR6325P-1
is the heart of an exceptionally accurate yet space efficient full-range system.

Features:
High-performance bi-amplified design with patented JBL transducer technology.
Front panel volume and power controls.
Integrated mounting points for horizontal and vertical suspension.
Titanium composite high frequency device with elliptical oblate spheroidal waveguide.
Shielded for use next to video monitors.
Built in high-pass filtering for use with optional subwoofer.
User selectable workstation boundary compensation.
Powered monitors with 5.25" woofers and 1" titanium composite dome tweeters
100 watts power for low frequencies, 50 watts for highs
Cast aluminum enclosure for structural rigidity and light weight
Magnetically shielded for interference-free use near CRTs and other electronic gear
Linear Spatial Reference technology ensures even frequency response at the mix position
 

PRICE PER UNIT

ADAMs A7 & A7X: the evolution of a legend

The predecessor to the A7X, the A7, became the most famous of all ADAM monitors in a very short time. Not only has it been reviewed over three dozen times with outstanding results, it has also received numerous awards. The A7 quickly gained mass appeal, praised in many of the worldʼs largest internet forums. Still today, the A7 are the reference monitors in many smaller studios.

With the A7X, ADAM Audio proudly presents the evolution of a legend. It takes everything that made the A7 such an outstanding speaker to a new level.

Driver technology

The first aspect that distinguishes the old from the new model is the X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels.

The perfect integration with the lower frequencies has been achieved with a newly designed 7” midwoofer. It has been redesigned with a much bigger voice coil (1.5”) and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction.

Amplifiers / controls

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

On the rear panel are several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.

Features of the HR824mk2 Studio Reference Monitor:

- High-resolution Active studio reference monitor
- Ultra-linear frequency response for accurate mix translation
- 8.75 in. high-precision, low-distortion LF transducer
- 1 in. titanium dome, ferrofluid cooled tweeter
- Optimized Waveguide for wide, even sweet zone
- Twin FR Series amps -- 150W for LF / 100W for HF
- Cast aluminum Zero Edge Baffle minimizes diffraction
- Full internal damping eliminates midrange artifacts
- Onboard passive radiator extends bass response to 35Hz
- Acoustic Space, LF roll-off, and HF controls
- Balanced XLR, TRS, and unbalanced RCA inputs
- OmniMount ready for easy wall/ceiling placement
- THX pm3 certified for surround sound applications
- Perfect for High Definition audio, cinema and gaming systems

PRICE PER UNIT

S3X-V

Using the newly developed 4” HexaCone midrange and 9” HexaCone woofer combined together with the X-ART tweeter creates the unique S3X-V control monitor.

A step up over the smaller models, the S3X-V is capable of producing more power and volume along with a more detailed and homogeneous sound that will impress even the most experienced sound engineer. Whether the complex sonic images of an orchestra or the smooth tone of a jazz trio, the S3X-V reveals even the finest nuances of any material. The driver assembly of the S3X-V allows long time, non-fatiguing listening sessions.

Reviews: "Wonderfully detailed...”

“Wonderfully detailed, with an exceptionally transparent mid-range. [...] ADAM make the leap to a three-way speaker design that seems to pay dividends in clarity and separation. [...] I think it would be fair to say theyʽre the best sounding ADAM monitors Iʽve reviewed.” (Sound On Sound, 12/2009)

“No doubt, the S3X-V deserve the title Reference Monitor. With this series, ADAM Audio proves to have a very good feeling for meeting the specific demands of the sound engineerʽs guild, creating studio standards at the same time. [...] A precision tool combined with a luxury good.” (www.96kHz.de, 03/2010)

DM-2100: 2.1-ch Speaker System Features The DM-2100 2.1-ch Speaker System is an affordable way to add accurate reference monitoring with a subwoofer for enhanced bass response. The left and right speakers each offer 15 watts of power, while the 50-watt subwoofer provides a powerful low-end boost. And with 24-bit/96kHz digital inputs, the DM-2100 is perfect for use with Roland/BOSS digital studios and instruments, or with computer systems and more.

• Affordable 2.1-channel monitoring system with 24-bit/96kHz digital inputs
• Powered bass reflex speakers with 15 watts per side and flat frequency response
• Active subwoofer with 50-watt amplifier for increased low end
• Front-mounted controls convenient located on right speaker
• Coaxial and optical digital inputs, plus analog inputs (RCA and 1/4-inch type)
• Sleek black wooden cabinets with magnetic shielding