The new Roth Audioblob2 multimedia audio system is an idea partner for PC or Mac based music/multimedia systems. This system has been developed in partnership with audio engineers from Tannoy, with many years experience in designing the very best home audio systems. Audioblob2 provides superlative audio quality for music/multimedia & gaming and is configured so […]
The new Roth Audioblob2 multimedia audio system is an idea partner for PC or Mac based music/multimedia systems. This system has been developed in partnership with audio engineers from Tannoy, with many years experience in designing the very best home audio systems.
Audioblob2 provides superlative audio quality for music/multimedia & gaming and is configured so that you can control the overall audio volume and the sub-bass level separately, thereby providing subtle and discreet volume control, up to an annoy-your-neighbours, floor-shaking level 10 – The choice is yours !
Included Accessories:
6 x shallow satellite feet
4 x deep satellite feet
4 x subwoofer feet
2 x phono to bare wire satellite speaker cables
1 x 3.5mm to phono input cable
Specifications:
Satellites
Sensitivity (2.83V @ 1m): 85dB
Frequency response (-6dB): 80Hz – 56kHz
Crossover frequency: 7.7kHz (mid to high)
80Hz (to subwoofer)
Drivers: HF 15mm (5/8”) mylar dome,
Neodymium magnet system.
LF 75mm (3”) paper cone
Nominal impedance: 8 ohm
Magnetic shielding: yes
Finish White
Dimensions (H x W x D) 140 x 97 x 95mm (5 1/2 x 3 4/5 x 4 5/16”)
Weight 1.5kg (3.3lbs)
Subwoofer
Power output – Watts (RMS) 12 to satellite
28 to subwoofer
Frequency response (-6dB): 42Hz – 80Hz
Driver: 165mm (6 1/2 “) paper cone
Auxiliary bass radiator: 165mm (6 1/2 “) paper cone
Inputs: 2 x phono to 3.5mm stereo jack lead provided
Outputs to satellites: 2 x phono
Power requirements: 230V AC, 50Hz, 100VA max.
Finish White
Dimensions (H x W x D), incl. feet 290 x 220 x 280mm (11 3/8 x 8 11/16 x 11ins)
Weight 5.5kg (12.1lbs)
Weight
6.00 kg
Reviews
There are no reviews yet.
Be the first to review “ROTH AudioBlob 2.1 Set Loudspeaker 2+1 Multimedia monitor” Cancel reply
The new Roth Audioblob2 multimedia audio system is an idea partner for PC or Mac based music/multimedia systems. This system has been developed in partnership with audio engineers from Tannoy, with many years experience in designing the very best home audio systems.
Audioblob2 provides superlative audio quality for music/multimedia & gaming and is configured so that you can control the overall audio volume and the sub-bass level separately, thereby providing subtle and discreet volume control, up to an annoy-your-neighbours, floor-shaking level 10 - The choice is yours !
Included Accessories:
6 x shallow satellite feet
4 x deep satellite feet
4 x subwoofer feet
2 x phono to bare wire satellite speaker cables
1 x 3.5mm to phono input cable
Specifications:
Satellites
Sensitivity (2.83V @ 1m): 85dB
Frequency response (-6dB): 80Hz – 56kHz
Crossover frequency: 7.7kHz (mid to high)
80Hz (to subwoofer)
Drivers: HF 15mm (5/8”) mylar dome,
Neodymium magnet system.
LF 75mm (3”) paper cone
Nominal impedance: 8 ohm
Magnetic shielding: yes
Finish White
Dimensions (H x W x D) 140 x 97 x 95mm (5 1/2 x 3 4/5 x 4 5/16”)
Weight 1.5kg (3.3lbs)
Subwoofer
Power output – Watts (RMS) 12 to satellite
28 to subwoofer
Frequency response (-6dB): 42Hz – 80Hz
Driver: 165mm (6 1/2 ") paper cone
Auxiliary bass radiator: 165mm (6 1/2 ") paper cone
Inputs: 2 x phono to 3.5mm stereo jack lead provided
Outputs to satellites: 2 x phono
Power requirements: 230V AC, 50Hz, 100VA max.
Finish White
Dimensions (H x W x D), incl. feet 290 x 220 x 280mm (11 3/8 x 8 11/16 x 11ins)
Weight 5.5kg (12.1lbs)
Features of the HR824mk2 Studio Reference Monitor:
- High-resolution Active studio reference monitor
- Ultra-linear frequency response for accurate mix translation
- 8.75 in. high-precision, low-distortion LF transducer
- 1 in. titanium dome, ferrofluid cooled tweeter
- Optimized Waveguide for wide, even sweet zone
- Twin FR Series amps -- 150W for LF / 100W for HF
- Cast aluminum Zero Edge Baffle minimizes diffraction
- Full internal damping eliminates midrange artifacts
- Onboard passive radiator extends bass response to 35Hz
- Acoustic Space, LF roll-off, and HF controls
- Balanced XLR, TRS, and unbalanced RCA inputs
- OmniMount ready for easy wall/ceiling placement
- THX pm3 certified for surround sound applications
- Perfect for High Definition audio, cinema and gaming systems
Dimensions and Weight in PackagingShipping Weight: 41 lbs Shipping Dimensions: 14 x 18 x 22 in
DM-2100: 2.1-ch Speaker System
Features The DM-2100 2.1-ch Speaker System is an affordable way to add accurate reference monitoring with a subwoofer for enhanced bass response. The left and right speakers each offer 15 watts of power, while the 50-watt subwoofer provides a powerful low-end boost. And with 24-bit/96kHz digital inputs, the DM-2100 is perfect for use with Roland/BOSS digital studios and instruments, or with computer systems and more.
Affordable 2.1-channel monitoring system with 24-bit/96kHz digital inputs
Powered bass reflex speakers with 15 watts per side and flat frequency response
Active subwoofer with 50-watt amplifier for increased low end
Front-mounted controls convenient located on right speaker
Coaxial and optical digital inputs, plus analog inputs (RCA and 1/4-inch type)
Sleek black wooden cabinets with magnetic shielding
Rated Output Power50W + 15W + 15WSpeakerSubwoofer: 16cm, Satellite Units: 9.2cmNominal Input LevelLine 1: -10dBu, Line 2: -10dBuInput Impedance18k ohmControlsR Channel: Bass Control Knob, Treble Control Knob, Volume 1 (Digital In/ RCA pin), Volume 2 (1/4” phone), Power Switch, Digital Input Select Switch, Phase SwitchConnectorsR Channel: Line 1 Jack (L, R; RCA pin), Line 2 Jack (L (MONO), R; 1/4” phone), Optical Input Connector, Coaxial Input Connector, Dedicated connector for power control and audio signal, Channel Input Jack (R; RCA pin),
L Channel: Channel Input Jack (L; RCA pin),
Sub Woofer: Dedicated connector for power control and audio signal, Channel Output Jacks (L, R; RCA pin), AC In JackDigital InputSampling Rate 32/44.1/48/96 kHz, D/A Convertor 24 bitsPower SupplyAC117, 230 or 240VAccessoriesSpeaker Cables (RCA pin type), Dedicated Cable for power control and audio signal, Power CableSize and Weight ( Satellite Units )Width130 mm5-1/8 inchesDepth160 mm6-5/16 inchesHeight200 mm7-7/8 inchesWeight
The predecessor to the A7X, the A7, became the most famous of all ADAM monitors in a very short time. Not only has it been reviewed over three dozen times with outstanding results, it has also received numerous awards. The A7 quickly gained mass appeal, praised in many of the worldʼs largest internet forums. Still today, the A7 are the reference monitors in many smaller studios.
With the A7X, ADAM Audio proudly presents the evolution of a legend. It takes everything that made the A7 such an outstanding speaker to a new level.
Driver technology
The first aspect that distinguishes the old from the new model is the X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels.
The perfect integration with the lower frequencies has been achieved with a newly designed 7” midwoofer. It has been redesigned with a much bigger voice coil (1.5”) and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction.
Amplifiers / controls
Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.
On the rear panel are several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.
Mid-Woofer
Number
1
Basket Ø
7" (175 mm)
Voice coil Ø
1.5" (38 mm)
Cone material
Carbon/Rohacell/Glass Fiber
Tweeter
Number
1
Type
X-ART
Diaphragm area
4 inch² (2420 mm²)
Equiv. Diaphragm Ø
2" (56 mm)
Velocity transform ratio
4:1
Diaphragm weight
0.17 g
Built-in Amplifiers
Mid-Woofer
1
Type
PWM
Amp. power RMS / music
100 W / 150 W
Tweeter
1
Type
A/B
Amp. power RMS / music
50 W / 75 W
Control panel
Input Sensitivity
-∞ to +14 dB
High Shelf EQ > 5 kHz
±6 dB
Low Shelf EQ
±6 dB
Tweeter gain
±4 dB
Input connectors
Analog
XLR / RCA
General data
Frequency response
42 Hz - 50 kHz
THD 90dB/1m > 100 Hz
≤0.5 %
Long term output
≥106 dB
Max. peak
≥114 dB
Crossover frequencies
2500 Hz
Input impedance
30 KOhm
Weight
20.3 lb (9,2 kg)
Magnetically shielded
No
Height x Width x Depth
13.5" (337 mm) x 8" (201 mm) x 11" (280 mm)
Warranty
5 Years
Delivery contents
Power cord, Manual
Ultra-linear frequency response from 50 Hz to 21 kHz with individual frequency diagrams
Built-in 150- and 75-Watt power amps with enormous power reserve
Ultra high-resolution ferrofluid-cooled tweeter
Long-throw 8 ¾" woofer with special polypropylene diaphragm and deformation-resistant aluminum die-cast chassis
Controlled dispersion characteristics and extremely large "sweet spot” owing to the unique BEHRINGER wave guide technology
Active crossover network with 4th order Linkwitz-Riley filters
Adjustable to a wide range of acoustic conditions and subwoofer operation
Separately controlled limiter for low and high frequency overload protection
Automatic standby mode (defeatable)
Magnetic shielding allows placement near computer monitors
Delivered as "matched pairs” with individual frequency diagrams
Low-vibration and environment-friendly E1 MDF cabinet
Servo-balanced inputs with XLR and ¼” TRS connectors
Conceived and designed by BEHRINGER Germany
The compact LSR6325P-1 provides exceptional performance for use in applications
where accuracy is a must, but space is limited. With a 5.25 in. high-excursion woofer,
a damped titanium composite tweeter, and 150 Watts of amplification, it outperforms
many larger systems. When used with the LSR6312SP Subwoofer, the LSR6325P-1
is the heart of an exceptionally accurate yet space efficient full-range system.
Features:
High-performance bi-amplified design with patented JBL transducer technology.
Front panel volume and power controls.
Integrated mounting points for horizontal and vertical suspension.
Titanium composite high frequency device with elliptical oblate spheroidal waveguide.
Shielded for use next to video monitors.
Built in high-pass filtering for use with optional subwoofer.
User selectable workstation boundary compensation.
Powered monitors with 5.25" woofers and 1" titanium composite dome tweeters
100 watts power for low frequencies, 50 watts for highs
Cast aluminum enclosure for structural rigidity and light weight
Magnetically shielded for interference-free use near CRTs and other electronic gear
Linear Spatial Reference technology ensures even frequency response at the mix position
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.