| Content |
RSA0K12A1003 Stereo log 10kaX2 K-Alps fader 100mm, mounting distance 120mm
Stereo log 10kOhm K-Alps fader
Travel 100mm
Mounting distance 120mm,
M3 thread mouting holes.
Part number: 10300098
Smooth running 100mm track mixing console fader with mounting distance of 120mm and shaft dimensions of 1.2x8mm.
M3 mounting holes.
Used in the following mixing consoles: Airmate-(USB), AIRENCE-USB, Clubmix, Orion, Cinemix, Vision, replacement for JP faders in Aircom, Dayner, various Discom models |
16-Channel EtherSound Network I/O Card
Mini-YGDAI cards make it easy to add I/O in a wide variety of audio and network formats to Yamaha digital mixing consoles, processors, and power amps that are equipped with compatible card slots. Mini-YGDAI cards can give your system the most up-to-date capabilities for any application.
Features - 24bit resolution,16-in/16-out EtherSound (ES100) interface (8-in/8-out at 96kHz)
- Expandable to up to 64-in/64-out with MY16-EX expansion cards
- 2x etherCON CAT5 connectors for EtherSound I/O, 1x D-sub 9 pin connector for RS232-C, 2x RJ-45 connectors for MY16-EX connection
- Remote setup, patching and monitoring by AVS Monitor
Specifications | General Specifications | | Channel Count | 16IN / 16OUT | | Format | EtherSound | | Resolution | 24 bit | | Connector | 2x EtherCon (for EtherSound),
2x RJ-45 (for MY16-EX),
D-sub 9-pin (for HA remote) |
|
- Allows 19" rack mounting of the MG102C and MG82CX
The MG82CX and MG102C can be rack-mounted using an optional rack-mounting kit for optimum integration with any system or installation. |
High-Performance 32-Channel Audinate Dante Expansion Card for X32
- 32-channel 48 kHz, bi-directional audio interface for Dante* IP networks
- High-speed 24-bit signal transmission with sample-accurate synchronization and low latency
- Allows interfacing with standard 100 MBit/s or Gigabit network infrastructure with DSCP-based QoS
- Mixed sample and bit rates can coexist on the same network
- Full remote control of X32 possible using the integrated Ethernet switch
- Audinate* Dante Controller application with full control over configuration and signal routing among all Dante-enabled devices
- Dante Virtual Soundcard allows employing your PC or Mac* for IP-based multitrack recording and playback of up to 64 channels (license optionally available at www.audinate.com)
- Secondary connection can be configured for seamless redundant audio networking
- 3-Year Warranty Program**
- Conceived and designed by BEHRINGER Germany
| 96kHz Compatible 8-Channel Analog Output Card
Mini-YGDAI cards make it easy to add I/O in a wide variety of audio and network formats to Yamaha digital mixing consoles, processors, and power amps that are equipped with compatible card slots. Mini-YGDAI cards can give your system the most up-to-date capabilities for any application.
Features
- 24bit resolution, 96kHz compatible 8-out analog audio interface
- 1x D-sub 25 pin connector (balanced)
- Max output level before clip: +18dBu
Specifications
| General Specifications |
| Channel Count |
96kHz compatible 8OUT |
| Format |
Analog |
| Max output level |
+18dBu |
| Sampling frequency |
96kHz |
| Resolution |
24 bit |
| Connector |
1x D-sub 25pin connector |
| Professional Automation for Multi-microphone Mixing
The Dugan-MY16 is an automatic mixing card for Yamaha digital mixers that employs advanced technology from Dan Dugan Sound Design. When multiple microphone inputs need to be mixed without a script or pre-planned gain changes, the Dugan-MY16 can automatically optimize gain distribution over multiple faders so that the engineer is free to concentrate on the quality of the mix, rather than being chained to the faders. It's almost like having a talented assistant engineer keeping track of fader levels, lightening the overall workload and maximizing efficiency.
Features
- 24bit resolution, 16-in/16-out automatic mixing (8-in/8-out at 96 kHz)
- 2x Optical connectors, 1x RJ-45 connector
- Up to 8 cards can be used simultaneously to handle up to 128 channels at 48 kHz, or 64 channels at 96 kHz
- Automatic detection of active mics with automatic control of individual channel and overall gain
- No speech cutoff due to late fader activation, for smooth, uninterrupted sound
- Effective background noise and feedback suppression without the need for noise-gate type threshold level settings
- Easy setup: simply insert on the appropriate mixer input channels and raise the faders
- Channels can be grouped to make up to three independent automatic mixers
- Dugan Control Panel software application provides remote control and level monitoring capability
- Can also function as an 8-channel auto-mixer + 8-channel ADAT interface
Specifications
| General Specifications |
| Operating Modes |
Standard: 16 channels of Dugan mixing at 44.1 or 48kHz, ADAT connectors link multiple Dugan units
High-rate: 8 channels of Dugan mixing at 88.2 or 96kHz sample rate, ADAT connectors link multiple Dugan units
Shared: 8 channels of Dugan mixing and 8 channels of general purpose ADAT I/O |
| Digital I/O |
ADAT optical, 24 bit, 44.2/48kHz (Shared mode only) |
| Gain |
Unity |
| Audio Latency |
0.2ms |
| Optical Linking |
Up to 8 units may be linked in a ring; links with Models D-2, D-3 , E, E-1 and Dugan-MY16 |
| Connectors |
10/100 BASE T: RJ-45
Linking and Digital I/O: ADAT optical |
| Recommended
Yamaha Mixers |
CL5/3/1, PM5D/-RH, DSP5D, M7CL-48ES/-48/-32, LS9-32/-16, DM2000, DM1000, 02R96, 01V96/96i, DME64N/24N |
| Dimensions |
H=4.0cm (1.57“)
W=12cm (4.72“)
D=17.6cm (6.91“) |
| Weight |
160g (5.6oz)
0.6kg (1lb 5oz) in shipping box |
|
Reviews
There are no reviews yet.