Content |
RSA0K12A1003 Stereo log 10kaX2 K-Alps fader 100mm, mounting distance 120mm
Stereo log 10kOhm K-Alps fader Travel 100mm Mounting distance 120mm, M3 thread mouting holes.
Part number: 10300098
Smooth running 100mm track mixing console fader with mounting distance of 120mm and shaft dimensions of 1.2x8mm. M3 mounting holes.
Used in the following mixing consoles: Airmate-(USB), AIRENCE-USB, Clubmix, Orion, Cinemix, Vision, replacement for JP faders in Aircom, Dayner, various Discom models |
High-Performance 32-Channel Audinate Dante Expansion Card for X32
- 32-channel 48 kHz, bi-directional audio interface for Dante* IP networks
- High-speed 24-bit signal transmission with sample-accurate synchronization and low latency
- Allows interfacing with standard 100 MBit/s or Gigabit network infrastructure with DSCP-based QoS
- Mixed sample and bit rates can coexist on the same network
- Full remote control of X32 possible using the integrated Ethernet switch
- Audinate* Dante Controller application with full control over configuration and signal routing among all Dante-enabled devices
- Dante Virtual Soundcard allows employing your PC or Mac* for IP-based multitrack recording and playback of up to 64 channels (license optionally available at www.audinate.com)
- Secondary connection can be configured for seamless redundant audio networking
- 3-Year Warranty Program**
- Conceived and designed by BEHRINGER Germany
|
Yamaha MBCL Meterbridge - for the CL1 and CL 3, Includes fitting kit | 16-channel Multi-format I/O via a Single Slot
The MY16AE Mini-YGDAI Digital I/O card can be used with Yamaha's DM2000, 02R96, DM1000 and future digital consoles to provide up to 16 channels of simultaneous AES/EBU-format (D-sub 25 pin) I/O via a single expansion slot. All 16 channels can be used independently at sample rates up to 48-kHz, or the MY16AE card can be used for "double channel" connection to 96-kHz recorders providing 8 channels of I/O at 88.2 or 96-kHz.
Connection with 96-kHz recorders
Although the DM2000, DM1000 and 02R96 handle 96-kHz audio as standard, most of the currently available digital recorders can handle 96- kHz audio only in double channel mode (using 2 tracks to make one). In this configuration the DM2000, DM1000 and 02R96 use one channel for one (96-kHz) track, but twice the number of I/O connections must be used. The newly introduced MY16-AT/TD/AE cards can handle 16 channels of 44.1/48-kHz audio or up to 8 channels of 96-kHz audio in double channel mode. With the newest recorders that handle 96-kHz audio as standard (in double speed mode like the DM2000, DM1000 and 02R96) you can make standard connections using the MY8- AE96(S) card. MY8-AE96(S) card can work either in double speed or single speed mode.
Features
- 24bit resolution, 16-in/16-out AES/EBU interface (8-in/8-out at 96kHz)
- 2x D-sub 25 pin connectors
Specifications
General Specifications |
Channel Count |
16IN / 16OUT |
Format |
AES/EBU |
Connector |
2x D-sub 25 pin |
Resolution |
24 bit |
|
The PM5D is reliably powered by an external power supply unit. The PW800W is extremely compact and lightweight (3U, 10kg). Thanks to its high efficiency, the low speed cooling fans are extremely quiet.
Two PW800W units can be serially connected using optional PSL120 cable for failsafe operation. PW800W accepts 100 - 240 volts so it can be used anywhere.
| Suitable for use with many Soundcraft mixing consoles including:
200SR (24ch), 200B (24ch), 200BVE (8ch), 200 Delta (24ch), Delta AVE (8ch)
DC power connector: 5 pin screw-lock
3 Output rails: +17V, -17V, +48V
Power requirements: 110/120/220/240VAC ±10% 50/60Hz
Input power: 100VA
Dimensions: 483(w) x 195(d) x 89(h)mm
Physical: standard 19" (2u) rack mount kit included
Weight: 5kg |
Reviews
There are no reviews yet.