Content | The S4012 high-efficiency band pass subwoofer is the ideal bass frequency extension to complement the RCFACUSTICA Compact series two-way loudspeakers for small size installations and distributed music systems.
The low-frequency transducer is an RCF Precision high-power 12” woofer with a 3” inside/outside voice coil to minimize power compression and extend the life of the product.
This new woofer design guarantees a fast and controlled reproduction of the bass frequency range. Using bandpass loading to the transducer, the subwoofer design ensures an efficient acoustic response down to 45 Hz.
The cabinet features two Neutrik Speakon™ connectors in a recessed input plate.
APPLICATIONS
- • Low Frequency Enhancement
- • Music Enhancement
- • Special Effects Reinforcement
- • Entertainment Systems
- • Live Music Reinforcement
- • Small Club Sound Systems
- • Infill Sub Bass Enhancement
General Specs
- 12" high-efficiency RCF Precision 3" voice-coil woofer with Inside/Outside Coil Technology
- Horn reflex loaded woofer
- 124 dB maximum sound pressure level
- Response down to 45 Hz
- Rectangular box enclosure with protective metal grille
- Baltic Birch cabinet with black, heavy duty, textured epoxy paint
- 35 mm standard pole mount in top section of cabinet
- Integrated hand carry points
Acoustical Specs
- Frequency Response -10 dB:45Hz ÷ 200 Hz
- Max SPL @ 1m:124dB
- System Sensitivity:92dB
- Nominal Impedance:8Ω
- Power Handling:400W
- Peak Power Handling:1600W
- Recommended Amplifier:800W
Cabinet Specs
- Cabinet Material:15 mm birch plywood construction
- Handles:2 on side
- Pole Mount/Cap:Yes
- Grille:Custom perforated steel grille
- Colour:Black, scratch resistant paint
Size/Weight
- Height:360 / 14.17 mm/inch
- Width:500 / 19.69 mm/inch
- Depth:400 / 15.75 mm/inch
- Net Weight:20 / 44 kg/lbs
| Features
- Compact subwoofer system for installations
– 12″ double coil loudspeaker
– Right/Left inputs
– Filtered right/left outputs
– Wall mount accessory
The Arco 12 Sub incorporates the new 122S dual coil 12” loudspeaker for bass reproduction which provides low frequency output to 30 Hz. The dual voice coil configuration of the loudspeaker allows the cabinet to reproduce both the left and right channel subwoofer frequencies.
The Arco 12 Sub cabinet uses a band-pass configuration. The enclosure is manufactured in MDF and is available in a black paint finish. An optional mounting accessory permits wall mounting. The connector panel provides stereo inputs and high-pass filtered satellite outputs for either Arco 4 or Arco 24 systems.
The Arco 12 Sub is ideal for foreground music and music/paging systems requiring bass reinforcement. Possible applications include restaurants, retail outlets, bars, music cafes, fitness centers, or any other indoor application.
Technical Data
Power Handling |
170 W Cont. Program/Coil |
Frequency Range (-10 dB) |
30 Hz-180 Hz |
Nominal Impedance |
8 + 8 ohms |
Sensitivity 1 W/1 m |
106 dB SPL |
Rated Peak SPL at 1 m |
134 dB |
Internal Crossover |
In: 12dB/oct low pass 180 Hz
Out: 6 dB/oct high-pass |
Connectors |
Sping-Loaded Terminals |
Enclosure Material |
MDF |
Color/Finish |
Black Paint |
Dimensions (H x W x D) |
36 x 59.2 x 28.5 cm
14.2 x 23.3 x 11.2 in |
Weight |
14 kg (30.8 lb) |
|
The SW10 STUDIO subwoofer has been designed specifically for optimum matching with the MSP series powered monitor speakers. Combined with MSP7 STUDIO or MSP5 STUDIO speakers in a stereo of surround system it can provide a seamlessly extended low end for accurate ultra wide range monitoring. A comprehensive selection of inputs and outputs as well as a phase switch and continuous high-cut and level controls make it easy to achieve optimum performance in any room and system. Whether you're simply mixing basic stereo programs or authoring DVD audio in full surround, MSP STUDIO series speakers plus an SW10 STUDIO will give you the ultimate monitoring experience.
GENERAL Type Powered Subwoofer
Crossover Frequency -
Overall Frequency Response 25Hz - 150Hz (-10dB)
Maximum Output Level 111dB, 1 m on Axis
Dimensions (W x H x D) 328 x 459 x 476 mm
Weight 26.5 kg
Magnetic Shielding Yes (Non-covered type)
SPEAKER SECTION Components LF 10" cone
HF -
Enclosure Type Bass-Reflex
Material MDF
AMPLIFIER SECTION Output Power * LF 180W
f = 100Hz, THD = 1%, RL = 8O
HF -
S/N, IHF-A filter > 100dB, LEVEL = Max
Input Sensitivity XLR-3-31 +4 dBu, LEVEL = Center
-6 dBu, LEVEL = Max
PHONE -
Input Connectors, Impedance XLR-3-31 (balanced), 10 kO
Output Connectors XLR-3-32 x 3 (balanced),
parallel connection with Input
Controls LEVEL control Center Click VR
(Min = -8 Attenuation)
LOW CUT switch -
HIGH TRIM -
LOW TRIM -
POWER SWITCH on/off
PHASE SWITCH Normal/Reverse
LPF control 40-120 Hz, 80 Hz at Center Click
Indicators LED Green: Power On
Red: Clipping
Power Consumption 160W
* These specifications apply to rated power supplies of 100, 120, 230 and 240 V.
* Specifications and appearance subject to change without notice.
|
The S4022 is a compact, high-output band-pass subwoofer dedicated to permanent installations.
The system is equipped with two advanced 12” RCF precision woofers mounted in a clam-shell internal chamber.
The two transducers couple to achieve tight and maximised output. Each 12” features massive ceramic magnets and 3” copper voice coil.
The system is capable of producing a Max SPL of 131 dB and handles 800 Watts AES.
Features |
---|
Compact, arrayable, 2 x 12" bandpass subwoofer system | 131 dB max SPL, 800 Watt AES | Equipped with RCF high power 2 x12“, 3" voice coil woofers | Extensive internal bracing, 8 x M10 mounting points | Recessed handles | Baltic Birch cabinet finished in a very resistant, textured, polyurethane black paint | Epoxy powder coated front grille | Dedicated to permanent installation |
Acoustical Specifications |
---|
Frequency Response -10 dB: | 40 Hz | ÷ 0.2 kHz | Max SPL @ 1m: | 131 dB | | System Sensitivity: | 97 dB | | Nominal Impedance: | 4 Ω | | Power Handling: | 800 Watt | | Peak Power Handling: | 2400 Watt | | Recommended Amplifier: | 1600 | |
TRANSDUCERS |
---|
Woofer: | 2 X 12" woofer, 3" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 400 Watts AES | | Sensitivity: | 97 dB | |
INPUT SECTION |
---|
Input connector: | 2 x Speakon NL4 | |
CABINET |
---|
Cabinet Material: | 15 mm birch plywood construction | | Hardware: | 8 x m10 mounting points, 2 x recessed | | Handles: | 2 seitlich | | Grille: | Custom perforated steel grille | | Colour: | Black, scratch resistant paint | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 500 / 19.68 mm/inch | | Width: | 650 / 25.59 mm/inch | | Depth: | 580 / 22.83 mm/inch | | Net Weight: | 38 / 83.77 Kg/Lbs |
|
The S8018 II high-efficiency subwoofer is the ideal low-frequency extension to complement RCF installed systems.
The low-frequency transducer is a hypervented vented, high excursion RCF Precision 18” woofer with a 4” inside/outside voice coil to minimize power compression and extend the life of the product. Using bass-reflex loading the subwoofer design ensures an efficient acoustic response down to 30 Hz. The Baltic birch plywood enclosure is painted with black, heavy duty, textured epoxy. The front is protected by a strong powder coated metal grille. The cabinet features two Neutrik Speakon™ connectors in a recessed input plate. A M20 pole mount adaptor is provided on the top of the cabinet, integrated hand carry points on the cabinet sides.
Features
- 18" high-efficiency 4" voice-coil woofer with Inside/Outside Coil Technology
- 137 dB maximum sound pressure level
- Response down to 30 Hz
- Rectangular box enclosure with protective metal grille
- 35 mm standard pole mount in top section of cabinet
- Baltic Birch cabinet painted with black, heavy duty, textured epoxy
- Integrated hand carry points
Acoustical Specifications
- Frequency Response -10 dB: 30 Hz ÷ 200 Hz
- Max SPL @ 1m: 137 dB
- System Sensitivity: 100 dB
- Nominal Impedance: 8 Ω
- Power Handling: 1500 W
- Peak Power Handling: 6000 W
- Recommended Amplifier: 3000 W
Transducers
- Woofer: 18" woofer, 4" voice coil
- Nominal Impedance: 8 Ω
- Input Power Rating: 1500 W AES
- Sensitivity: 100 dB
Input Section
- Input connector: Speakon NL4
Cabinet
- Cabinet Material: 15 mm birch plywood construction
- Handles: 2 on side
- Grille: Custom perforated steel grille
- Colour: Black, scratch resistant paint
Physical Specifications
- Height: 630 / 24.80 mm/inch
- Width: 530 / 20.87 mm/inch
- Depth: 770 / 30.31 mm/inch
- Net Weight: 43 / 94.60 kg/lbs
|
The SR-A18B is a sub-woofer system designed to be used in conjunction with the SR-A12L or SR-A12S Line array speaker. The SR-A18B employs the multi-amplifier drive system and is designed to be used in conjunction with the optional DP-0206 Digital Processor.
Enclosure | Bass-reflex type | Power Handling Capacity | Continuous program: 720 W | Rated Impedance | 8 Ω | Sensitivity | 95 dB (1 W, 1 m) | Frequency Response | 40 - 400 Hz (when using DP-0206 (option)) | Crossover Frequency | 80 Hz (when using DP-0206 (option)) | Speaker Component | 46 cm cone-type | Input Connector | M5 screw terminal, distance between barriers: 12.2 mm
and Neutrik NL4MP × 2 | Finish | Enclosure: Plywood, black, paint
Front grille: Punched steel plate, black, acrylic paint | Dimensions | 740 (W) × 573 (H) × 698 (D) mm | Weight | 66 kg (including accessories) | Accessory | Joint plate …2, Joint plate mounting bolt (M10) …16 | Option | Rigging frame: SR-RF12
Digital processor: DP-0206 |
|
Reviews
There are no reviews yet.