TOA SR-S4SWP 2-Way Line Array Speaker System

2,124.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The SR-S4SWP is a two-way line array speaker ideal for short distance sound transmission and configures a line array by arranging speaker elements vertically close to each other. It satisfies the water protection requirements set down in the IPX4 Standard. It can be converted into the bi-amplifier drive system by changing the internal connection. It […]

 

Read more

The SR-S4SWP is a two-way line array speaker ideal for short distance sound transmission and configures a line array by arranging speaker elements vertically close to each other. It satisfies the water protection requirements set down in the IPX4 Standard. It can be converted into the bi-amplifier drive system by changing the internal connection. It can be used for high-impedance applications with the installation of the optional MT-S0601 Matching Transformer.

Specification
Enclosure Sealed type
Power Handling Capacity Continuous program: 600 W (single-amp mode)
Low 240 W, High 240 W (bi-amp mode)
Rated Impedance 8 Ω (single-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode)
Sensitivity 93 dB (1 W, 1 m)
Frequency Response 70 – 20,000 Hz (when using DP-0206 (option))
Crossover Frequency 3,500 Hz
Directivity Angle Horizontal: 90゜, Vertical: 10゜
Speaker Component Low frequency: 10 cm cone-type × 8
High frequency: 2.5 cm balanced dome-type × 24
Connected Cable Direct cable withdrawal from internal speaker: φ8.6 mm,
conductor cross section: 1.25 m㎡, 4-core cable, 3 m
Operating Temperature -10℃ to +50℃
Water Protection IPX4
Finish Enclosure: Plywood, white, urethane coating
Front grille: Punched stainless steel (SUS304), white, paint
Dimensions 160 (W) × 892 (H) × 303 (D) mm (excluding connected cable)
Weight 16 kg
Accessory Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1
Option Matching transformer: MT-S0601, Extension plate: SR-EP4WP,
Wall tilt bracket: SR-TB4WP, Protection pad: SR-PP4,
Digital processor: DP-0206

 

Weight 16.00 kg

Reviews

There are no reviews yet.

Be the first to review “TOA SR-S4SWP 2-Way Line Array Speaker System”

Your email address will not be published. Required fields are marked *

Quick Comparison

TOA SR-S4SWP 2-Way Line Array Speaker System removeJBL VRX 932LA 12'' 2-way 800W RMS Line Array Loudspeaker System removeTOA SR-A12S Mid-Size Line Array (Short Throw) removeTOA HX-5B ARRAY SYSTEM removeJBL VT 4881A Compact Arrayable 1-18" Subwoofer removeTOA SR-S4LWP 2-Way Line Array Speaker System remove
NameTOA SR-S4SWP 2-Way Line Array Speaker System removeJBL VRX 932LA 12'' 2-way 800W RMS Line Array Loudspeaker System removeTOA SR-A12S Mid-Size Line Array (Short Throw) removeTOA HX-5B ARRAY SYSTEM removeJBL VT 4881A Compact Arrayable 1-18" Subwoofer removeTOA SR-S4LWP 2-Way Line Array Speaker System remove
Image
SKUSR-S4SWPVRX 932LASR-A12SHX-5BVT 4881ASR-S4LWP
Rating
Price 2,124.00 incl. GR VAT 2,962.00 incl. GR VAT 3,135.28 incl. GR VAT 662.00 incl. GR VAT 4,586.00 incl. GR VAT 1,900.99 incl. GR VAT
Stock

Available on backorder

Available on backorder

In stock

In stock

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderIn stockIn stockAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The SR-S4SWP is a two-way line array speaker ideal for short distance sound transmission and configures a line array by arranging speaker elements vertically close to each other. It satisfies the water protection requirements set down in the IPX4 Standard. It can be converted into the bi-amplifier drive system by changing the internal connection. It can be used for high-impedance applications with the installation of the optional MT-S0601 Matching Transformer.

Specification
Enclosure Sealed type
Power Handling Capacity Continuous program: 600 W (single-amp mode)
Low 240 W, High 240 W (bi-amp mode)
Rated Impedance 8 Ω (single-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode)
Sensitivity 93 dB (1 W, 1 m)
Frequency Response 70 - 20,000 Hz (when using DP-0206 (option))
Crossover Frequency 3,500 Hz
Directivity Angle Horizontal: 90゜, Vertical: 10゜
Speaker Component Low frequency: 10 cm cone-type × 8
High frequency: 2.5 cm balanced dome-type × 24
Connected Cable Direct cable withdrawal from internal speaker: φ8.6 mm,
conductor cross section: 1.25 m㎡, 4-core cable, 3 m
Operating Temperature -10℃ to +50℃
Water Protection IPX4
Finish Enclosure: Plywood, white, urethane coating
Front grille: Punched stainless steel (SUS304), white, paint
Dimensions 160 (W) × 892 (H) × 303 (D) mm (excluding connected cable)
Weight 16 kg
Accessory Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1
Option Matching transformer: MT-S0601, Extension plate: SR-EP4WP,
Wall tilt bracket: SR-TB4WP, Protection pad: SR-PP4,
Digital processor: DP-0206

 

JBL VRX 932LA 12'' 2-way 800W RMS Line Array Loudspeaker System

Key Features :  
 
Constant Curvature Array - The waveguide mounts three compression drivers on a
continuous arc enabling them to work together acoustically as if they were a single driver.

Amplitude Shading- Convenient series of switches on each enclosures that controls
the output of each high frequency section in the array.

Suspension and Rigging.

Dual Angle Pole Socket - JBL's dual angle pole sockets
allow great flexibility in aiming the enclosure.

Differential Drive? Woofer. 

Specifications:

Frequency Range

:

57 Hz - 20 kHz(-10 dB)

Frequency Response

:

75 Hz - 20 Hz (+/-3db)

Coverage Pattern

:

100 x 15 nominal

Crossover Modes

:

4 Ohms Bi-amp / passive,
externally switchable

  Crossover Frequency

:

132 dB SPL peak 1.2 kHz

Power Rating2 (Continuous / Program / Peak)

:

Passive: 800 W / 1600 W / 3200 W
Bi-amp LF: 800 W / 1600 W / 3200 W
Bi-amp HF 75 W / 150 W / 300 W

System Maximum SPL

:

Passive: 130 dB SPL peak
Bi-amp LF: 130 dB SPL peak

System Sensitivity (1w @ 1m

:

Passive: 95 dB SPL
Bi-amp LF: 95 dB SPL
Bi-amp HF: 114 dB SPL

LF Driver

:

1 x JBL 2262H 305 mm (12 in) neodymium magnet
Differential Drive? with dual
voice-coils and magnetic gaps

HF Driver


3 x JBL 2407J, 25.4 mm (1.0 in)
voice-coil, neodymium magnet
compression driver

Nominal Impedance

:

Passive: 8 ohm
Bi-amp LF: 8 ohm
Bi-amp HF: 8 ohm

Active Tunings

:

Tunings available at www.jblpro.com

Enclosure

:

18 mm, 11-ply birch plywood

Suspension / Mounting

:

120 Volts: 9.5 A; 230-240 volts; 5.0 A Optional VRX932LA-AF line array
frame kit

Finish

:

Black DuraFlex? finish

Grille

:

Power coated, black, 16-guage perforated steel with with acoustically transparent foam

Input Connectors

:

Neutrik? Speakon? NL-4 (x2)

Dimensions (H x W x D)

:

349 x 597 x 381 mm
(13.75 x 23.5 x 15.0 in)

Net Weight

:

21.8 kg (48 lb)

Optional Accessories

:

VRX932LA-AF: Suspension array frame
SS2-BK: Tripod speaker stand
SS3-BK: Satellite speaker pole,
41 in (1041 mm)
SS4-BK: Adjustable satellite speaker pole to be used with the SRX718S only

TOA SR-A Series Mid-Size Line Arrays feature TOAʼs proprietary "Synch-Drive" horn technology (pat. pending) to provide a uniform, high frequency sound field offering excellent sound clarity and minimal interference. Mid-high modules include the SR-A12L (long-throw) and the SR-A12S (short-throw) each with dual compression drivers and 12" low frequency driver. The SR-A18 subwoofer module features a heavy duty 18" low frequency driver rated at 720 Watts continuous power handling. Along with weather resistant models and multiple mounting hardware options, the SR-A Series Line Arrays are backed with a five year product warranty.

FEATURES:
  • Designed for wide bandwidth response - These compact and powerful 2-way modular speaker units can be used in multiple configurations as required to deliver greater output power with a more extended frequency response.
  • High-performance driver units - Each Type A Series speaker module contains a 30cm (12“) low frequency unit and a high-frequency horn attached to two compression drivers for greater output.
  • Wavefront control - The horn incorporates a proprietary phase wavefront control throat that functions to obtain the best possible performance from the high frequency drivers.
  • Adjustable sound coverage - Type A Series provides two speaker configurations designed for specific coverage characteristics, each having a different taper. The 5-degree taper is for effectively transmitting sound over distance while the 15-degree taper is optimized for excellent short range coverage.
  • Simple maintenance - Maintenance and servicing are made easier on the Type A Series to suit it for permanent installations. All driver replacement is possible from the speaker's rear, a simple and speedy procedure.
  • SR-A12L Long-throw enclosure (15°V x 90°H)
  • SR-A12S Short-throw enclosure (5°V x 90°H)
  • Components: Dual compression drivers. 12” low frequency driver. Power handling: 450 W (LF), 180 W (HF)
  • SR-A18 Subwoofer (Sold Seperately) 18” low frequency Power handling: 720 W
  • Five year warranty
General Specs:
Enclosure: ....... Bass Reflex Type
Power Handling Capacity: ....... Continuous Program: Low 450W, High 180W
Rated Impedance: ....... Low: 8 Ohms, High: 16 Ohms
Sensitivity: ....... Low: 98dB, High: 109dB both at 1W/1M
Frequency Response: ....... 50 Hz - 20kHz (When using DP-0206 Option)
Crossover Frequency: ....... 1000Hz (When using DP-0206 Option)
Directivity Angle: .......

Horizontal: 90 degrees
Vertical: 15 degrees

Speaker Component: ....... Low frequency: 30cm cone-type
High frequency: Wave front control horn 90° (horizontal) × 15° (vertical) + compression driver × 2
Input Connector: ....... M5 screw terminal, distance between barriers: 12.2mm and Neutrik NL4MP x 2 (usable connector: Neutrik NL4FC)
Finish: Enclosure: ....... Plywood black, paint
Front Grill: ....... Punched steel plate, black, acrylic paint
Dimensions: ....... 740 (W) x 433 (H) x 467 (D) mm
Weight: ....... 47kg including accessories
Accessories: ....... Joint Plate x 2, Joint plate mounting bolt (M10) x 16
Option: ....... Rigging Frame: SR-RF12, Digital Processor: DP-0206

TOA HX-5 Array system

Variable Dispersion Speaker System.
Four speaker modules ensure high power and high quality.
The changeable orientation of each of the four speaker modules independently
allows the directivity angle of the speaker system to be adjusted.
Built-in passive network ensures appropriate sound quality.
deal for both permanent and temporary installations, including both vertical and horizontal positioning.
Equipped with a convenient carrying handle.
Can be mounted directly on a wall or suspended by wire, chain or shackle with no need to use optional brackets.
Optional mounting brackets allow use in a wide variety of applications, including suspension, ceiling mounting,
wall mounting, and speaker stand mounting. Mounting procedures are described in the instruction manuals enclosed
with the mounting bracket or stand adapter.
HX-5B 
Enclosure Type Bass Reflex
Power Handling Continuous Pink Noise; 200W: Continuous Program; 600W
Rated Impedance 8ohms
Sensitivity (1 W, 1m) 96 dB (60° mode), 97 dB (45° mode), 98 dB (30° mode), 99 dB (15° mode)
Frequency Response(Deviation -10dB) 70 to 20,000 Hz (60° mode) 75 to 20,000 Hz (45° mode)
80 to 20,000 Hz (30° mode) 85 to 20,000 Hz (15° mode)
Crossover Frequency 4kHz
Directivity Angle Horizontal: 100° (over 2,000 Hz) Vertical: 60° (over 800 Hz), 45° (over 1 .2 kHz),
30° (over 1 .6 kHz), 15° (over 3.2 kHz) variable
Speaker Component Low frequency: 12 cm (5“) cone-type x 4 High frequency: Balanced dome-type x 12
Input Terminal Speakon NL4MP x 2 and M4 screw terminal
Finish (Enclosure) Polypropylene, black
Dimensions 408 (w) x 546 (h) x 342 (d) mm 16 1/16 (w) x 21 1/2 (h) x 13 15/32 (d) inches
Weight 16kg
Accesory Hanging bracket x 2, Hex. wrench x 1
Options Matching transformer:MT-200,Speaker mounting bracket:HY-PFB,HY-CW1B,HY-WM1B,
HY-WM2B,HY-CN1B, Speaker stand adapter:HY-ST1

The VT4881A is designed to deliver high quality sound reinforcement of VLF (Very Low Frequency) musical information for a variety of applications including concert audio and theatrical presentations of all types.

Features :   Specifications :
  • Advanced technology component: Differential Drive®, dual voice coil, Direct Cooled™ cone transducer.
  • Independently accessible voice coils, enabling external parallel or series wiring.
  • Advanced construction techniques and hybrid materials provide exceptionally rigid, lightweight enclosure.
  • Rugged DuraFlex™ exterior finish; weatherized components Integrated S.A.F.E.™ suspension system: premium heat-treated alloys provide high-strength, reliable hanging arrays.
  • For ground-stacked or suspended applications in stand-alone arrays or in combination with other VERTEC® system products.
 
Frequency Range   :   25 Hz - 160 Hz (-10dB)

Frequency Response   :   34 Hz - 125 Hz (± 3 dB)

Continuous Power Rating   :   2000W

Sensitivity   :   91 dB, 1W / 1m (2.83 Vrms at 3.3 ft)

Nominal Impedances   :   8 ohm

Dimensions (W x H x D)   :   787 mm x 569 mm x 654 mm
(31 in x 22.4 in x 25.8 in)

Weight   :   50.4 kg (111 lb)

 

The SR-S4LWP is a two-way line array speaker ideal for long distance sound transmission and configures a line array by arranging speaker elements vertically close to each other. It satisfies the water protection requirements set down in the IPX4 Standard. It can be converted into the bi-amplifier drive system by changing the internal connection. It can be used for high-impedance applications with the installation of the optional MT-S0601 Matching Transformer.

Specification
Enclosure Sealed type
Power Handling Capacity Continuous program: 600 W (single-amp mode)
Low 240 W, High 240 W (bi-amp mode)
Rated Impedance 8 Ω (single-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode)
Sensitivity 94 dB (1 W, 1 m)
Frequency Response 70 - 20,000 Hz (when using DP-0206 (option))
Crossover Frequency 3,500 Hz
Directivity Angle Horizontal: 90゜, Vertical: 0゜ (within the range of speaker height)
Speaker Component Low frequency: 10 cm cone-type × 8
High frequency: 2.5 cm balanced dome-type × 24
Connected Cable Direct cable withdrawal from internal speaker: φ8.6 mm,
conductor cross section: 1.25 m㎡, 4-core cable, 3 m
Operating Temperature -10℃ to +50℃
Water Protection IPX4
Finish Enclosure: Plywood, white, urethane coating
Front grille: Punched stainless steel (SUS304), white, paint
Dimensions 160 (W) × 895 (H) × 255 (D) mm (excluding connected cable)
Weight 16 kg
Accessory Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1
Option Matching transformer: MT-S0601, Extension plate: SR-EP4WP,
Wall mounting bracket: SR-WB4WP, Wall tilt bracket: SR-TB4WP,
Protection pad: SR-PP4, Digital processor: DP-0206

 

Weight16.00 kg21.80 kg47.00 kg16.00 kg50.40 kg16.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 16.00 kg
Weight 21.80 kg
Weight 47.00 kg
Weight 16.00 kg
Weight 50.40 kg
Weight 16.00 kg