ADJ Saber Spot WW LED Pinspot 15W Warm White

151.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: 090064 Category:
The Saber Spot WW is a compact Pinspot with a 15-Watt warm white LED. Features DMX-512, flicker-free operation, strobing, electronic dimming and has a 4-Button DMX display system on the rear panel. Its built-in ACL lens produces a razor sharp 4-degree beam angle. The Saber Spot WW has a scissor bracket system that allows the […]

 

Read more

The Saber Spot WW is a compact Pinspot with a 15-Watt warm white LED. Features DMX-512, flicker-free operation, strobing, electronic dimming and has a 4-Button DMX display system on the rear panel. Its built-in ACL lens produces a razor sharp 4-degree beam angle.

The Saber Spot WW has a scissor bracket system that allows the fixture to be hung or set on the ground, and is ideal for performance stages, installations, table spotting, lighting retail stores.

Specifications

Optical
• Light Source: 15-Watt Warm White LED
• LED Life Expectancy: 10,000 Hrs
• Beam Angle: 4-degrees
• Includes 2 interchangeable frost filter lens (10-degree & 45-degree)
• Refresh Rate: 3.6KHz

Technical Features
• 4-button Digital Display for easy navigation
• Electronic Dimming 0 – 100%
• Flicker Free
• Includes a scissor yoke to be hung or set on the ground

Connections
• Power Input: powerCON
• Power Pass through: powerCON
• Control: 3 Pin DMX In/Out pigtails
• With Wired Digital Communication Network

Control
• 2 DMX Channel Modes: 1 or 2 

Electrical
• Input Voltage: 100-240V 50Hz/60Hz (Auto Sensing)
• Power draw 120V 60Hz: 15W, 0.13 Amps
• Power draw 220V 50Hz: 15W, 0.07 Amps 

Physical 
• Dimensions (LxWxH): 3.5” x 6.75” x 3.5” / 88 x 170 x 87mm
• Weight: 2.6 lbs / 1.2 kg.
• Metal Black Housing 

Certifications
• ETL Approved, UL, CE
• IP 20: Dry area, No liquids

What’s Included
• Manual
• powerCON power cord
• 2 frost filter lens (10-degree & 45-degree)
• O-ring for frost filter lens

Optional Accessories
• PLC 3,PLC 6, PLC 10 (powerCON passthrough cables)

Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “ADJ Saber Spot WW LED Pinspot 15W Warm White”

Your email address will not be published. Required fields are marked *

Quick Comparison

ADJ Saber Spot WW LED Pinspot 15W Warm White removeCAMEO CLP56TRI3WBS PAR 56 CAN - 9 x 3 W TRI Colour LED PAR Can RGB in black housing removeSTARAY ST-1030N LED LIGHT EFFECT 2X10W RGBW 4:1 removeSTAGG Kingpar 5-Z Par Spot 6x Cool white, 12x Warm white removeCAMEO CLPST64Q8W Studio PAR 64 CAN - 18 x 8W QUAD Colour LED PAR Can RGBW in black housing removeCAMEO CLPFLATPRO18 FLAT PRO PAR CAN 18 - 18 x 10 W FLAT LED RGBWA PAR light in black housing remove
NameADJ Saber Spot WW LED Pinspot 15W Warm White removeCAMEO CLP56TRI3WBS PAR 56 CAN - 9 x 3 W TRI Colour LED PAR Can RGB in black housing removeSTARAY ST-1030N LED LIGHT EFFECT 2X10W RGBW 4:1 removeSTAGG Kingpar 5-Z Par Spot 6x Cool white, 12x Warm white removeCAMEO CLPST64Q8W Studio PAR 64 CAN - 18 x 8W QUAD Colour LED PAR Can RGBW in black housing removeCAMEO CLPFLATPRO18 FLAT PRO PAR CAN 18 - 18 x 10 W FLAT LED RGBWA PAR light in black housing remove
Image
SKU090064CLP56TRI3WBSST-1030NH20ST00006CLPST64Q8WCLPFLATPRO18
Rating
Price 151.00 incl. GR VAT 197.09 incl. GR VAT 87.00 incl. GR VAT 301.43 incl. GR VAT 267.00 incl. GR VAT 583.52 incl. GR VAT
Stock

Available on backorder

Available on backorder

Only 1 left in stock

In stock

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderOnly 1 left in stockIn stockAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The Saber Spot WW is a compact Pinspot with a 15-Watt warm white LED. Features DMX-512, flicker-free operation, strobing, electronic dimming and has a 4-Button DMX display system on the rear panel. Its built-in ACL lens produces a razor sharp 4-degree beam angle.

The Saber Spot WW has a scissor bracket system that allows the fixture to be hung or set on the ground, and is ideal for performance stages, installations, table spotting, lighting retail stores.

Specifications

Optical
• Light Source: 15-Watt Warm White LED
• LED Life Expectancy: 10,000 Hrs
• Beam Angle: 4-degrees
• Includes 2 interchangeable frost filter lens (10-degree & 45-degree)
• Refresh Rate: 3.6KHz

Technical Features
• 4-button Digital Display for easy navigation
• Electronic Dimming 0 – 100%
• Flicker Free
• Includes a scissor yoke to be hung or set on the ground

Connections
• Power Input: powerCON
• Power Pass through: powerCON
• Control: 3 Pin DMX In/Out pigtails
• With Wired Digital Communication Network

Control
• 2 DMX Channel Modes: 1 or 2 

Electrical
• Input Voltage: 100-240V 50Hz/60Hz (Auto Sensing)
• Power draw 120V 60Hz: 15W, 0.13 Amps
• Power draw 220V 50Hz: 15W, 0.07 Amps 

Physical 
• Dimensions (LxWxH): 3.5” x 6.75” x 3.5” / 88 x 170 x 87mm
• Weight: 2.6 lbs / 1.2 kg.
• Metal Black Housing 

Certifications
• ETL Approved, UL, CE
• IP 20: Dry area, No liquids

What’s Included
• Manual
• powerCON power cord
• 2 frost filter lens (10-degree & 45-degree)
• O-ring for frost filter lens

Optional Accessories
• PLC 3,PLC 6, PLC 10 (powerCON passthrough cables)

Ultra-high performance LED PAR 56 with 9 extremely bright 3-Watt TRI colour LEDs in a black housing. This high-performance LED PAR has a beam angle of 25 degrees and a power consumption of just 50 Watts. Like all new LED PAR cans, the CLP 56 TRI 3 WPS features a sturdy housing. The double bracket makes this PAR can the ideal lamp for use as a floor PAR or for mounting to cross-beams and bars.

It is actuated either via the DMX protocol (3-pole XLR) with six control channels, in master/slave or standalone mode (sound control, colour change, solid colours). It features an integrated microphone and is quick and easy to operate using four buttons and an LED display.

  • 9 ultra-bright 3-Watt TRI colour LEDs
  • Beam angle of 25 degrees
  • Low power consumption of just 50 Watts
  • Operated via DMX (6 channels), in master/slave mode or standalone mode
  • Simple to operate using the four buttons and LED display
  • Double bracket included as standard
  • Cooling method: Heat sink 
  • Sturdy aluminium housing
Specifications
  • Product: LED Par Can
  • Type: PAR56
  • Colour Range: RGB
  • Number of LEDs: 9
  • LED Type: 3 W TRI Colour
  • Beam Angle: 25°
  • DMX Input: XLR 3-pole
  • DMX Output: XLR 3-pole
  • DMX Mode: 6-channel
  • DMX Functions: RGB, Master Dimmer, Strobe, Colour Jump, Colour Fade
  • Standalone Modes: Static Colour, Colour Change, Colour Fading, Sound Control, Slave
  • Controls: Mode, Value Up, Enter, Value Down
  • Indicators: LED Display
  • Power Supply: 100 V AC - 250 V AC
     
  • Power Consumption: 50 W
  • Power Connector: Schuko
  • Housing Material: Aluminium
  • Housing Colour: Black
  • Dimensions without mounting bracket): 230 x 250 x 260 mm

LED lighting effects Butterfly, RGBW, with 2x10W common transmitter (4 in 1) Cree Led's. Unlimited combinations of colors. Features Electronic Dimmer, Strobe, works with DMX 512 (8 or 5 channels) or independently with music or Auto or Master / Slave. Index IP20 sealing interior. Exterior finish black. Power consumption: 30W, power supply: 110V -240V, 50-60Hz. Dimensions: 27x28x20cm. Weight: 3kg. Uses: disco, club, bar and party.

•Voltage: AC100V~240V, 50~60HZ
• Power Consumption: 73W
• LED Quantity: 6x Cool white, 12x Warm white
• Beam Angle: 25°
• IP Grade: IP20
• DMX channels: 5
• Packaging Size: 300*300*380 mm
• Net weight: 3,1Kg
• Gross weight: 4,53Kg
Features
• 3PIN plug DMX in and out
• IEC power plug in and out
• Die-cast aluminium housing
• LED display for easy setup
• Working indoor temperature -20°C~+40°C
• Strobe/Colour temperature selection

18 x 8W QUAD Colour LED RGBW PAR Can in black housing

Extremely high-powered LED studio PAR in a black, short housing. Ruggedly made housing in studio look with built-in filter frame holder. The Cameo CLPST64Q8W has a total of 18 quad LEDs (RGBW), thus guaranteeing perfect mixing of solid and pastel colours - including white. With a power consumption of just 170 watts, the 8-watt quad LEDs produce an impressive level of brightness with a beam angle of 25 degrees.

It is operated using four buttons and an LED display on the back.

The CLPST64Q8W is equipped with a super-quiet fan for cooling. The dual bracket permits simple use as a floor PAR.

There are three operating modes. In addition to DMX operation with 2, 3, 4 or 7 channels, this LED PAR can also be operated in standalone mode or via sound control.

The CLPST64Q8W runs on mains voltages of 110 to 250 volts, so it can be used universally and worldwide.

  • Type: Studio PAR 64
  • Colour spectrum: RGBW
  • Number of LEDs: 18
  • LED type: 8 W QUAD colour
  • Refresh rate: 5000 Hz
  • Beam angle: 25°
  • DMX input: XLR 3-pin male
  • DMX output: XLR 3-pin male
  • DMX mode: 2-channel, 3-channel, 4-channel, 7-channel
  • DMX Functions: Colour fade, colour jump, master dimmer, RGBW, sound control, strobe
  • Standalone modes: Colour jump, colour fade, slave mode, sound control, static colour
  • Controls: Enter, Mode, Value Down, Value Up
  • Indicators: LED display
  • Power supply: 110 V AC - 250 V AC
  • Power consumption: 170 W
  • Power connector: Power cord with Schuko connector (Type E / CEE 7/7)
  • Housing material: metal
  • Housing colour: black

Dimensions without mounting bracket

  • Width: 230 mm
  • Height: 220 mm
  • Length: 255 mm

With its super slim design the Cameo CLPFLATPRO18 professional PAR light is the ideal choice where space is limited. 18 high performance 10 watt LEDs produce a huge range of RGBWA colours from soft pastel hues to rich, warm tints with a 30° beam angle and powerful 28,000 lux while the 3,000 Hz refresh rate eliminates flicker. Operation is dead silent due to convection cooling.

The CLPFLATPRO18 provides 5 DMX modes with numerous functions, integrated programs and sound control via the built-in microphone. It features master, slave and standalone capability while the illuminated LC display with 4 controls allows for easy manual setting.

The black die-cast enclosure sports both 3-pin and 5-pin XLR inputs and outputs for the DMX signal and Neutrik PowerCon sockets for mains supply and daisy-chaining. The Cameo CLPFLATPRO18 includes a multifunctional bracket for a wide variety of mounting options.

  • Colour Range: RGBWA
  • Number of LEDs: 18
  • LED Type: 10 W
  • Beam Angle: 30°
  • DMX Input: XLR 3-pole, XLR 5-pole
  • DMX Output: XLR 3-pole, XLR 5-pole
  • DMX Mode: 2-channel, 3-channel-1, 3-channel-2, 5-channel, 8-channel
  • DMX Functions: Colour Jump, Colour Fade, Strobe, Master Dimmer, RGBWA, Sound Control
  • Standalone Modes: Colour Jump, Colour Fade, Static Colour, Sound Control, Slave Mode, Colour Macro
  • Controls: Mode, Value Down, Value Up, Enter
  • Indicators: illuminated LC-Display
  • Operating voltage: 110 - 240 V AC, 50 / 60 Hz
  • Power consumption: 200 W
  • Power Connector: Neutrik PowerCon in/out
  • Housing Material: Metal
  • Housing Colour: Black
  • Type of cooling: Convection
  • Illuminance (lx 1m): 28000 lx
  • Dimensions (without mounting bracket): 280 x 280 x 130 mm
Weight1.00 kg2.70 kg2.50 kg4.53 kg4.50 kg7.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 2.70 kg
Weight 2.50 kg
Weight 4.53 kg
Weight 4.50 kg
Weight 7.50 kg