Content |
The Saber Spot WW is a compact Pinspot with a 15-Watt warm white LED. Features DMX-512, flicker-free operation, strobing, electronic dimming and has a 4-Button DMX display system on the rear panel. Its built-in ACL lens produces a razor sharp 4-degree beam angle.
The Saber Spot WW has a scissor bracket system that allows the fixture to be hung or set on the ground, and is ideal for performance stages, installations, table spotting, lighting retail stores.
Specifications
Optical • Light Source: 15-Watt Warm White LED • LED Life Expectancy: 10,000 Hrs • Beam Angle: 4-degrees • Includes 2 interchangeable frost filter lens (10-degree & 45-degree) • Refresh Rate: 3.6KHz
Technical Features • 4-button Digital Display for easy navigation • Electronic Dimming 0 – 100% • Flicker Free • Includes a scissor yoke to be hung or set on the ground
Connections • Power Input: powerCON • Power Pass through: powerCON • Control: 3 Pin DMX In/Out pigtails • With Wired Digital Communication Network
Control • 2 DMX Channel Modes: 1 or 2
Electrical • Input Voltage: 100-240V 50Hz/60Hz (Auto Sensing) • Power draw 120V 60Hz: 15W, 0.13 Amps • Power draw 220V 50Hz: 15W, 0.07 Amps
Physical • Dimensions (LxWxH): 3.5” x 6.75” x 3.5” / 88 x 170 x 87mm • Weight: 2.6 lbs / 1.2 kg. • Metal Black Housing
Certifications • ETL Approved, UL, CE • IP 20: Dry area, No liquids
What’s Included • Manual • powerCON power cord • 2 frost filter lens (10-degree & 45-degree) • O-ring for frost filter lens
Optional Accessories • PLC 3,PLC 6, PLC 10 (powerCON passthrough cables)
|
Info EUROLITE LED LMCP Panel 30x30cm |
Ultra-high performance LED PAR 64 with 18 ultra-bright 3-Watt TRI colour LEDs in a black housing. This high-performance LED PAR has a beam angle of 25 degrees and a power consumption of just 80 Watts. Like all new LED PAR cans, the CLP 64 TRI 3 WBS features a sturdy housing. The double bracket makes this PAR can the ideal lamp for use as a floor PAR or for mounting to cross-beams and bars.
It is actuated either via the DMX protocol (3-pole XLR) with six control channels, in master/slave mode or standalone mode (sound control, colour change, solid colours). It features an integrated microphone and is quick and easy to operate using four buttons and an LED display.
- 18 ultra-bright 3-Watt TRI colour LEDs
- Beam angle of 25 degrees
- Low power consumption of just 80 Watts
- Operated via DMX (6 channels), in master/slave mode or standalone mode
- Integrated microphone for sound control
- Simple to operate using the four buttons and LED display
- Double bracket included as standard
- Cooling method: Fan
- Sturdy aluminium housing with polished or black finish
Specifications - Product: LED Par Can
- Type: PAR64
- Colour Range: RGB
- Number of LEDs: 18
- LED Type: 3 W TRI Colour
- Beam Angle: 25°
- DMX Input: XLR 3-pole
- DMX Output: XLR 3-pole
- DMX Mode: 6-channel
- DMX Functions: RGB, Master Dimmer, Strobe, Colour Jump, Colour Fade
- Standalone Modes: Static Colour, Colour Change, Colour Fading, Sound Control, Slave
- Controls: Mode, Enter, Value Up, Value Down
- Indicators: LED Display
- Power Supply: 100 V AC - 250 V AC
- Power Consumption: 80 W
- Power Connector: Schuko
- Housing Material: Aluminium
- Housing Colour: Black
- Dimensions (without mounting brackets): 260 x 280 x 300 mm
|
Featuring 7 high performance 10 watt LEDs, 30° beam angle and 3,000 Hz refresh rate, the Cameo CLPFLATPRO7 professional PAR light allows for stunning RGBWA colour mixing. The super slim design is totally noise free thanks to its convection cooling construction and thus perfect wherever space is limited and quiet operation is a must.
With 5 DMX modes, numerous functions, integrated programs and a built-in microphone for sound control the CLPFLATPRO7 produces a huge range of colours from soft pastel hues to rich, warm tints. It incorporates an illuminated LC display with 4 controls for easy manual operation and provides master, slave and standalone capability.
The black die-cast enclosure includes both 3-pin and 5-pin XLR inputs and outputs for the DMX signal and Neutrik PowerCon sockets for mains supply and daisy-chaining. The Cameo CLPFLATPRO7's multifunctional bracket design offers a wide variety of mounting options.
- Colour Range: RGBWA
- Number of LEDs: 7
- LED Type: 10 W
- Beam Angle: 30°
- DMX Input: XLR 3-pole, XLR 5-pole
- DMX Output: XLR 3-pole, XLR 5-pole
- DMX Mode: 2-channel, 3-channel-1, 3-channel-2, 5-channel, 8-channel
- DMX Functions: Colour Jump, Colour Fade, Strobe, Master Dimmer, RGBWA, Sound Control
- Standalone Modes: Colour Jump, Colour Fade, Static Colour, Sound Control, Slave Mode, Colour Macro
- Controls: Mode, Value Down, Value Up, Enter
- Indicators: illuminated LC-Display
- Operating voltage: 110 - 240 V AC, 50 / 60 Hz
- Power consumption: 100 W
- Power Connector: Neutrik PowerCon in/out
- Housing Material: Metal
- Housing Colour: Black
- Type of cooling: Convection
- Illuminance (lx 1m): 12000 lx
- Dimensions (without mounting bracket): 180 x 180 x 133 mm
|
Eurolite LED PAR56 RGB CHROME 20W
A new look for an old acquaintance
DMX-512 control via regular DMX-controller (occupies 6 channels)
Sound-control via built-in microphone
Color-change speed adjustable via dip switches
Illumination angle approximately 45?°
Locking possibility at the mounting bracket
For illuminating e. g. mirror balls, entrance or counter areas or as basic illumination
Perfect in public places, main halls, stages, lounges
Multi-color color-changes
Advantages of LED-technology: extremely long life, low power consumption, minimal
heat emission, defacto maintenance free with brilliant light radiation
Available in alu or in black
Specifications:
Power supply: 230 V AC, 50 Hz ~
Power consumption: 20 W
Dimensions: 220 x 210 x 220 mm
Weight: 1.5 kg
Number of LEDs: 151
|
Extremely powerful studio mini PAR with seven 8-watt QUAD COLOUR LEDs for optimal colour mixing and perfect white light. This studio LED PAR has a beam angle of 25 degrees and is controlled via five DMX modes. An LED display on the back and four buttons ensure simple and practical operation. Alternatively, the studio mini PAR can also be operated in standalone mode with a built-in microphone and sound control.
Sturdy white housing with double bracket for use as a floor PAR or on stands or traverses.
Maximum power consumption 60 watts.
Specifications - Product: LED Par Can
- Type: Studio Mini PAR
- Colour Range: RGBW
- Number of LEDs: 7
- LED Type: 8 W Quad Colour
- Refresh rate: 5000 Hz
- Beam Angle: 25°
- DMX Input: XLR 3-pole
- DMX Output: XLR 3-pole
- DMX Mode: 2-channel, 3-channel 1, 3-channel 2, 4-channel, 7-channel
- DMX Functions: RGBW, Master Dimmer, Strobe, Colour Jump, Colour Fade
- Standalone Modes: Static Colour, Colour Change, Colour Fading, Sound Control, Slave
- Controls: Mode, Enter, Value Up, Value Down
- Indicators: LED Display
- Power Supply: 110 V AC - 250 V AC
- Power Consumption: 60 W
- Power Connector: Schuko
- Housing Material: Metal
- Housing Colour: White
- Dimensions (without mounting bracket): 168 x 183 x 186 mm
|
Reviews
There are no reviews yet.