| Content |
The Saber Spot WW is a compact Pinspot with a 15-Watt warm white LED. Features DMX-512, flicker-free operation, strobing, electronic dimming and has a 4-Button DMX display system on the rear panel. Its built-in ACL lens produces a razor sharp 4-degree beam angle.
The Saber Spot WW has a scissor bracket system that allows the fixture to be hung or set on the ground, and is ideal for performance stages, installations, table spotting, lighting retail stores.
Specifications
Optical
• Light Source: 15-Watt Warm White LED
• LED Life Expectancy: 10,000 Hrs
• Beam Angle: 4-degrees
• Includes 2 interchangeable frost filter lens (10-degree & 45-degree)
• Refresh Rate: 3.6KHz
Technical Features
• 4-button Digital Display for easy navigation
• Electronic Dimming 0 – 100%
• Flicker Free
• Includes a scissor yoke to be hung or set on the ground
Connections
• Power Input: powerCON
• Power Pass through: powerCON
• Control: 3 Pin DMX In/Out pigtails
• With Wired Digital Communication Network
Control
• 2 DMX Channel Modes: 1 or 2
Electrical
• Input Voltage: 100-240V 50Hz/60Hz (Auto Sensing)
• Power draw 120V 60Hz: 15W, 0.13 Amps
• Power draw 220V 50Hz: 15W, 0.07 Amps
Physical
• Dimensions (LxWxH): 3.5” x 6.75” x 3.5” / 88 x 170 x 87mm
• Weight: 2.6 lbs / 1.2 kg.
• Metal Black Housing
Certifications
• ETL Approved, UL, CE
• IP 20: Dry area, No liquids
What’s Included
• Manual
• powerCON power cord
• 2 frost filter lens (10-degree & 45-degree)
• O-ring for frost filter lens
Optional Accessories
• PLC 3,PLC 6, PLC 10 (powerCON passthrough cables)
|
LED lighting effects Butterfly, RGBW, with 2x10W common transmitter (4 in 1) Cree Led's. Unlimited combinations of colors. Features Electronic Dimmer, Strobe, works with DMX 512 (8 or 5 channels) or independently with music or Auto or Master / Slave. Index IP20 sealing interior. Exterior finish black. Power consumption: 30W, power supply: 110V -240V, 50-60Hz. Dimensions: 27x28x20cm. Weight: 3kg. Uses: disco, club, bar and party. |
Info EUROLITE LED LMCP Panel 30x30cm |
18 x 8W QUAD Colour LED RGBW PAR Can in black housing
Extremely high-powered LED studio PAR in a black, short housing. Ruggedly made housing in studio look with built-in filter frame holder. The Cameo CLPST64Q8W has a total of 18 quad LEDs (RGBW), thus guaranteeing perfect mixing of solid and pastel colours - including white. With a power consumption of just 170 watts, the 8-watt quad LEDs produce an impressive level of brightness with a beam angle of 25 degrees.
It is operated using four buttons and an LED display on the back.
The CLPST64Q8W is equipped with a super-quiet fan for cooling. The dual bracket permits simple use as a floor PAR.
There are three operating modes. In addition to DMX operation with 2, 3, 4 or 7 channels, this LED PAR can also be operated in standalone mode or via sound control.
The CLPST64Q8W runs on mains voltages of 110 to 250 volts, so it can be used universally and worldwide.
- Type: Studio PAR 64
- Colour spectrum: RGBW
- Number of LEDs: 18
- LED type: 8 W QUAD colour
- Refresh rate: 5000 Hz
- Beam angle: 25°
- DMX input: XLR 3-pin male
- DMX output: XLR 3-pin male
- DMX mode: 2-channel, 3-channel, 4-channel, 7-channel
- DMX Functions: Colour fade, colour jump, master dimmer, RGBW, sound control, strobe
- Standalone modes: Colour jump, colour fade, slave mode, sound control, static colour
- Controls: Enter, Mode, Value Down, Value Up
- Indicators: LED display
- Power supply: 110 V AC - 250 V AC
- Power consumption: 170 W
- Power connector: Power cord with Schuko connector (Type E / CEE 7/7)
- Housing material: metal
- Housing colour: black
Dimensions without mounting bracket
- Width: 230 mm
- Height: 220 mm
- Length: 255 mm
|
Ultra-high performance LED PAR 64 with 18 ultra-bright 3-Watt TRI colour LEDs in a black housing. This high-performance LED PAR has a beam angle of 25 degrees and a power consumption of just 80 Watts. Like all new LED PAR cans, the CLP 64 TRI 3 WBS features a sturdy housing. The double bracket makes this PAR can the ideal lamp for use as a floor PAR or for mounting to cross-beams and bars.
It is actuated either via the DMX protocol (3-pole XLR) with six control channels, in master/slave mode or standalone mode (sound control, colour change, solid colours). It features an integrated microphone and is quick and easy to operate using four buttons and an LED display.
- 18 ultra-bright 3-Watt TRI colour LEDs
- Beam angle of 25 degrees
- Low power consumption of just 80 Watts
- Operated via DMX (6 channels), in master/slave mode or standalone mode
- Integrated microphone for sound control
- Simple to operate using the four buttons and LED display
- Double bracket included as standard
- Cooling method: Fan
- Sturdy aluminium housing with polished or black finish
Specifications - Product: LED Par Can
- Type: PAR64
- Colour Range: RGB
- Number of LEDs: 18
- LED Type: 3 W TRI Colour
- Beam Angle: 25°
- DMX Input: XLR 3-pole
- DMX Output: XLR 3-pole
- DMX Mode: 6-channel
- DMX Functions: RGB, Master Dimmer, Strobe, Colour Jump, Colour Fade
- Standalone Modes: Static Colour, Colour Change, Colour Fading, Sound Control, Slave
- Controls: Mode, Enter, Value Up, Value Down
- Indicators: LED Display
- Power Supply: 100 V AC - 250 V AC
- Power Consumption: 80 W
- Power Connector: Schuko
- Housing Material: Aluminium
- Housing Colour: Black
- Dimensions (without mounting brackets): 260 x 280 x 300 mm
|
Info EUROLITE LED LMCP Panel 30x30cm 24V, alu |
Reviews
There are no reviews yet.