| Content | Today the entertainment world can choose from a wide range of next generation beam effects. The innovative B-Ray line offers a double series of products that meet the demands of the professionals. B-Ray 8 plus is a double parallel bar with 8 beam outputs and a projection angle of 4 degrees, powered by powerful 10W RGBW multi colour LED sources. The double 145° TILT movement of each bar controlled individually generates incredible movement effects, with long range light beams that, controlled individually, offer many creative possibilities, suited to the field of use. The internal software was designed using one of the most intuitive interfaces of the market, giving the user many customisation possibilities that can be recalled directly from the control panel or are available in DMX mode. |
ADJ's Quad Phase HP is designed to fill a room and dazzle a crowd with dozens of razor sharp beams of light. This technologically advanced moonflower features a high-powered, 32-Watt 4-in-1 quad color LED source (RGBW). Offering twice as many majestic colors as a "TRI LED“, the Quad Phase HP produces up to fifteen colors in all.
The Quad Phase HP also offers all the latest features sought after in special effects lights such as: DMX-512 for programming or linking capabilities, exciting built-in sound active programs, no duty cycle (run all night), a long life, high output LED source (30,000 hours), 4-button DMX display on rear (for easier programmability), IEC power daisy-chaining, and a 1.8-degree steeper motor for smooth movement. The Quad Phase HP may be controlled by a DMX Controller or ADJ's UC3 easy-to-use mini controller.
Specifications:
High output Moonflower effect with 32-Watt Quad-Color LED 4-in-1 (Red, Green, Blue, White) technology produces color-changing beams of light
Dozens of razor sharp beams fill a dance floor, ceiling or wall
Using a 1.8 Degree Long Life Stepper motor Technology it can produce quick accurate movement or smooth fluid move movements for mood music
4 DMX Channels (Color, Rotation, Strobe, Dimmer)
Operation modes: Sound Active, Master/Slave or DMX-512
Exciting built-in programs (Sound Active & Master/Slave modes)
Produces 15 Preset Colors
Linkable via 3-pin XLR cable
4-button DMX display on rear panel
Beam Angle: 65 degree
Strobe & Pulse LED Effect
DMX-512 Protocol
Electronic Dimming: 0 - 100%
Runs extremely cool! - NO Duty Cycles! - Run all night!
Compatible with the ADJ UC3 easy-to-use controller (sold separately)
IEC AC IN/OUT on rear to daisy chain power (up to 5 Quad Phase HP's @ 120V and 9 Quad Phase HP's @ 230V)
Safety hook on rear panel
Power Draw: 64W Max
Multi voltage: 100V~240V, 50/60Hz
Long life LEDs (30,000 hr. rating)
Light Source: 32W RGBW LED 4-in-1
Dimensions (LxWxH): 12.5" x 8" x 11" / 312 x 198 x 279mm
Weight: 9 lbs. / 4 kg.
|
The LookFan is the ideal accessorie for the fog generators viper 2.6 and Orka.
Due to the powerful air flow the fog can be distributed quick and constant within
a room.
The hanging yoke guarantees a most flexible use. With the two star knobs screws
the fan can be fixed quick and easy in every requested position.
The connection to the viper 2.6 or Orka is done with a special plug. The LookFan
can then easily be controlled via a second channel at the DMX desk or directly at
the machine. It can also be used as a single wind machine.
Technical Data
Procedure Centrifugal blower
Voltage 230 V / 50 Hz
Air volume 1060 m3 / h
Speed 1850 min-1
Power 355 W
Current 1,55 A
Capacitor 8/450 ?F / VDE
Noise level 66 dBA
Dimensions without yoke
(L x W x H) 25 x 20 x 21.6 cm
Weight 3.6 kg
| Blacklight 60cm 18W 51101510
Complete set with UV tube
- UV tube with casing, power cord and power plug
- High ultraviolet light
- Warm-up time approx. 3 min
- Controlling by on/off switch on device
- With a beam angle of 100°
- For application areas such as: Party room; mobile djs/entertainer; Clubs/dancing school
illuminant
Package contents
- 1 x device, 1 x illuminant, 2 x mounting material, 2 x screw, 1 x user manual
| Power supply: |
230 V AC, 50 Hz |
| Power consumption: |
70 W |
| IP classification: |
IP20 |
| Protection class: |
Protection class I |
| Power connection: |
Fixed power supply cord with safety plug |
| Cable length: |
Approx. 1,7 m |
| Base: |
2 x G-13 |
| Control: |
On/off switch on device |
| Beam angle: |
100° |
| Beam angle (1/2 peak): |
100° |
| Housing color: |
Black |
| Diameter mounting holes: |
2 x Ø4mm |
| Material: |
Metal, 1 mm |
| Dimensions: |
Length: 63,5 cm
Width: 10 cm
Height: 4 cm |
| Weight: |
1,60 kg |
| Illuminant |
| Base: |
2 x G-13 |
| Lamp type: |
Fluorescent lamp |
| Color of light: |
UV-reflecting |
| Lead time: |
180 s |
| Construction: |
Tube T8 |
| Wavelength: |
365 nm |
| Complete set with UV tube
UV tube 120cm/36W. (51101520)
- UV tube with casing, power cord and power plug
- High ultraviolet light
- Warm-up time approx. 3 min
- Controlling by on/off switch on device
- With a beam angle of 100°
- For application areas such as: Party room; mobile djs/entertainer; Clubs/dancing school
illuminant
Package contents
- 1 x device, 1 x illuminant, 2 x mounting material, 2 x screw, 1 x user manual
| Power supply: |
230 V AC, 50 Hz |
| Power consumption: |
40 W |
| IP classification: |
IP20 |
| Protection class: |
Protection class I |
| Power connection: |
Fixed power supply cord with safety plug |
| Cable length: |
Approx. 1,7 m |
| Base: |
2 x G-13 |
| Control: |
On/off switch on device |
| Beam angle: |
100° |
| Beam angle (1/2 peak): |
100° |
| Housing color: |
Black |
| Diameter mounting holes: |
2 x Ø4mm |
| Material: |
Metal, 1 mm |
| Dimensions: |
Length: 1,23 m
Width: 10 cm
Height: 4 cm |
| Weight: |
3,21 kg |
| Illuminant |
| Base: |
2 x G-13 |
| Lamp type: |
Fluorescent lamp |
| Color of light: |
UV-reflecting |
| Lead time: |
180 s |
| Construction: |
Tube T12 |
| Wavelength: |
365 nm |
|
EUROLITE, FIB-203 LED fiber light, Valokuitunippu 1x 3W White LED
The imagination will know no limits!
- Whether as a starry ceiling, firework display, or as a unique curtain of light, the decorating possibilities are endless
- Fibre optic strands are bundled together and attached onto an illuminator
- Light is transmitted along the length of the fibres to shine at the tips
- The 1x3W LED in the illuminator provides color changing effect
- Color change speed adjustable via rotary-control
- Innumerable uses: Christmas, party and holiday lighting
- Advantages of LED-technology: extremely long life, low power consumption, minimal heat emission, defacto maintenance free with brilliant light radiation
- Power supply 230V via enclosed power unit
- For indoor use only
Technical specifications
Power supply: 230 V AC, 50 Hz ~ (via enclosed power unit)
Power consumption: 3 W
Fibre optic strand length: 2 m
Number of fibre optic strands: 200 pcs.
Number of LEDs: 1x3W white LED
Illuminator dimensions (LxWxH): circa 150 x 70 x 57 mm
Weight: circa 1.2 kg |
Reviews
There are no reviews yet.