SAMSON SACM11B BOUNDARY MICROPHONE CM11B OMNI-DIRECTIONAL

Discontinued

67.70 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
The surface mount CM11B has an Omni-directional pickup pattern that captures sound in a 180 degree pattern. A perfect application would be to place a CM11B microphone in the center of a board room or conference table to pick up everyone in the meeting.       * Surface mount Omni-directional boundary microphone     * Condenser […]

 

Read more

The surface mount CM11B has an Omni-directional pickup pattern that captures sound in a 180 degree pattern. A perfect application would be to place a CM11B microphone in the center of a board room or conference table to pick up everyone in the meeting.

 

    * Surface mount Omni-directional boundary microphone
    * Condenser element
    * Half Omni Pickup Pattern
    * Internal Hi-pass filter
    * Mini XLR connector
    * Includes 30-foot cable with mini to standard XLR connectors
    * 9-52 Volt Phantom Power Operation
    * Available in Black and White

 

Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “SAMSON SACM11B BOUNDARY MICROPHONE CM11B OMNI-DIRECTIONAL”

Your email address will not be published. Required fields are marked *

Quick Comparison

SAMSON SACM11B BOUNDARY MICROPHONE CM11B OMNI-DIRECTIONAL removeAKG C 562CM OMNIDIRECTIONAL-HEMISPHERICAL CONDENSER BOUNDARY MIC removeAUDAC AUAPM108 - Digital Paging Microphone for 8 Zones removeSENNHEISER E-901 Condenser Microphone removeShure MX202B/S Microflex Overhead Microphones removeLD SYSTEMS LDBM1 CONDENSER BOUNDARY ELECTRET MICROPHONE remove
NameSAMSON SACM11B BOUNDARY MICROPHONE CM11B OMNI-DIRECTIONAL removeAKG C 562CM OMNIDIRECTIONAL-HEMISPHERICAL CONDENSER BOUNDARY MIC removeAUDAC AUAPM108 - Digital Paging Microphone for 8 Zones removeSENNHEISER E-901 Condenser Microphone removeShure MX202B/S Microflex Overhead Microphones removeLD SYSTEMS LDBM1 CONDENSER BOUNDARY ELECTRET MICROPHONE remove
Image
SKU550.SAM.020C 562CMAUAPM108H10SE00101MX202B/SLDBM1
Rating
Price 67.70 incl. GR VAT 290.00 incl. GR VAT 634.87 incl. GR VAT 239.00 incl. GR VAT 333.12 incl. GR VAT 79.00 incl. GR VAT
Stock

Out of stock

In stock

Available on backorder

In stock

In stock

In stock

AvailabilityOut of stockIn stockAvailable on backorderIn stockIn stockIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The surface mount CM11B has an Omni-directional pickup pattern that captures sound in a 180 degree pattern. A perfect application would be to place a CM11B microphone in the center of a board room or conference table to pick up everyone in the meeting.

 

    * Surface mount Omni-directional boundary microphone
    * Condenser element
    * Half Omni Pickup Pattern
    * Internal Hi-pass filter
    * Mini XLR connector
    * Includes 30-foot cable with mini to standard XLR connectors
    * 9-52 Volt Phantom Power Operation
    * Available in Black and White

 

C 562 CM 

Small, low-profile boundary layer microphone
Wide frequency range
High sensitivity
Ideal for inconspicuous installation in a room
Suited for surveillance or recording
 
The C 562 CM flush-mount boundary microphone uses the same transducer as the C 562 BL.
The C 562 CM has been designed specifically for permanent, "invisible" mounting in ceilings,
walls, tables, stage props, etc.
Owing to its high sensitivity, the C 562 CM is a perfect tool for surveillance or live recording
since a single microphone can cover an entire room. The supplied XLR phantom power adapter
connects to the microphone cable through a miniature connector so installation holes can be
smaller than the diameter of the phantom power adapter.
 
SPECIFICATIONS:
Polar pattern omnidirectional (hemispherical)
Frequency range 20 to 20,000 Hz
Sensitivity 25 mV/Pa (-32 dBV)
Max. SPL 130 dB (k=1 %)
Equivalent noise level 16 dB-A
Signal/noise ratio (A-weighted) 78 dB
Impedance 600 ohms
Recommended load impedance >2000 ohms
Supply voltage 9 to 52 V phantom power to DIN/IEC
Current consumption Connector 3-pin XLR
Cable 0.5 m (20 in.)
Finish matte nickel plated
Dimensions 20 dia. x 28 mm (0.8 dia. x 1.1 in.)
Net weight 30 g (1.1 oz.)
Shipping weight 195 g (76.9 oz.)
 

The APM series are digital paging microphones equipped with a condenser microphone with cardiologic characteristics, mounted on a 30 cm long gooseneck. By means of a built-in compressor / limiter, the output level of the microphone signal is constantly maintained. The status of the reproduced signal is indicated on the front panel, to ensure the speaker that the message is clear and audible in all situations. Each console has 3 standard buttons (except the APM01 which has only PTT) with pre assigned functions: PTT (Push To Talk), Select all and Clear. All other buttons can be freely programmed, using the free APM configuration software.

The half-cardioid e 901 is the perfect condenser microphone for kick drum. It is highly robust and step-resistant. It benefits from an integrated preamp.

Pick-up pattern : half-cardioid
Frequency response : 20...20 000 Hz
Sensitivity in free field, no load : (1kHz) 0,5 mV/Pa
Max. Sound pressure level (aktiv) : 154 dB / SPL
Phantom powering : 48 V / 1,1 mA
Nominal impedance : Min. terminating impedance : 1000 Ohm
Dimensions : 126,5 x 105 x 26,5 mm
Weight : ca. 550 g

t is hard to believe that such small, unobtrusive microphones can produce such great sound, but it's true. Available in black or white finishes, and with in-line or plate mount preamps, MX202 Microflex® Overhead condenser microphones capture high-quality sound in a compact, adjustable package. Each model features a choice of interchangeable cardioid or supercardioid condenser microphone cartridges attached to a flexible, four inch gooseneck with a 30 foot cable.

Cartridge polar pattern indicated by model number suffix:
C = Cardioid, S = Supercardioid, N = No cartridge

Available Options
    MX202B/C     Black mini-condenser Cardioid mic, w/cable, in-line preamp, stand adapter
    MX202B/S     Black mini-condenser Supercardioid mic, w/cable, in-line preamp, stand adapter
    MX202W/C     White mini-condenser Cardioid mic, w/cable, in-line preamp, stand adapter
    MX202W/S     White mini-condenser Supercardioid mic, w/cable, in-line preamp, stand adapter
    MX202W/N     White mini-condenser mic, w/cable, in-line preamp, stand adapter, No Cartridge
    MX202BP/C     Black mini-condenser Cardioid mic; includes cable and plate-mounted preamplifier
    MX202BP/S     Black mini-condenser Supercardioid mic; includes cable and plate-mounted preamplifier
    MX202BP/N     Black mini-condenser mic; includes cable and plate-mounted preamplifier, No Cartridge
    MX202WP/C     White mini-condenser Cardioid mic; includes cable and plate-mounted preamplifier.
    MX202WP/S     White mini-condenser Supercardioid mic; includes cable and plate-mounted preamplifier.
    MX202WP/N     White mini-condenser mic; includes cable and plate-mounted preamplifier, No Cartridge

Boundary-layer Microphone The LD Systems BM1 is an electret condenser microphone with a hemispherical directional characteristic.

For micing upright and grand pianos on stage or in the studio. Additional applications in the area of conference technology, transmission of roundtable discussions and theatrical performances.

Product type Microphones
Type Installations
Frequency response 50 - 20000 Hz
Directivity half ball
Nominal impedance 250 Ohm(s)
Max. SPL (1% THD @ 1kHz) 135 dB
Phantom power requierements 48 V
Microphone input XLR (3-pin)
Width 27 mm
Height 74.5 mm
Diameter 93.5 mm
Accessories (included) cables (Mini-XLR / XLR, 6 m)
Weight 0,345 kg
Weight0.50 kg0.19 kg1.10 kg1.00 kg0.20 kg0.35 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 0.19 kg
Weight 1.10 kg
Weight 1.00 kg
Weight 0.20 kg
Weight 0.35 kg