| Content |
USED IN GOOD CONDITION.
Price does not include vat
The S com plus is a highly adaptable stereo compressor/limiter in an efficient single rackspace design.
It is intended for situations where extra flexibility is required to optimize signal levels. It delivers essential
control along with simplicity of operation. S com plus's comprehensive and wide-ranging controls provide
extensive manipulation of audio dynamics, even in the most complex situations.
Each channel features a wide range of variable control. A feature-rich Compressor section includes variable
Threshold, Ratio, Attack and Release controls. Samson's SKD (Smart Knee Detector) circuit dynamically
adjusts the compression curve to ensure a musical result. Our exclusive AEG (Auto Envelope Generator)
function simplifies optimum settings by constantly analyzing the audio input and automatically adjusting
the attack and release parameters based on the changing level. Key Inputs and Outputs are included for
externally processing the control voltage.
The Expander/Gate features a variable threshold level and switchable release time (fast or slow). The Gate
switch changes the downward expander ratio from "light" to "hard" gating for control ranging from subtle to
an obvious effect. A dedicated Peak/Limiter with variable control provides protection against peak and
overload independently of the compressor. When used in combination with the Compressor the Peak/Limiter
offers even more precise control over dynamic levels.
A functional De-esser improves audio quality by removing "S" from vocals and sibilance from overly bright
signal sources such as cymbals. The Enhancer switch engages the EFR (Enhanced Frequency Recovery)
circuit, which restores high frequencies that are sometimes diminished by heavy compression. Extensive
metering includes Input/Output, Gain Reduction, De-esser Level, Gate Open/Close and Limit. Other S com
plus features
FEATURES:
Compressor/Limiter, Expander/Gate, De-Esser with Peak Limiter
Expander/Gate with Variable Trigger Control and Switchable Fast/Slow Release
Peak Limiter with Independent Threshold Control and Peak LED
Adjustable De-Esser with independent LED Meter for Reducing Sibilance
Advanced Circuit Design Utilizing Low Noise Operational
Amplifiers and High Quality VCA's
Servo Balanced Inputs and Outputs on XLR and 1/4" Connectors
SKD (Smart Knee Detector) Circuit Switches from Soft to Hard Knee Based on the
Level of Input Signal Applied
AEG (Auto Envelope Generator) Mode Constantly Adjusts the Compressors Attack
and Release Times
Three-year Extended Warranty |
PRICE DOES NOT INCLUDE VAT
Art + Science = Magic
The Engineering Group at TC Electronic were given carte blanche to create the optimal studio
signal processor. Being musicians and studio engineers themselves, they know what is important
and have a feel for what you are looking for. Working on the borderline between art and science,
they created the M2000.
Designed for the artist within you, you will create magic when using the M2000.
Main features
Magic
The M2000 provides you with a broad palette of high quality effects enabling you to
create magical effects. The true dual engine configuration allows you to run two full-
blown effects simultaneously, i.e. on two individual effects sends. The effects have
been developed for optimal sonic quality with no compromises made. This has only
been possible because our engineers succeeded in combining the latest technology
with TC's powerful DARC? chip.
Ultimate User-Interface
The user-friendly TC feature, the Recall Wizard, instantly finds the preset that suits
your need in any situation. You simply enter your preferences, such as gentle reverb
for vocal, or extra pitch for guitar and the Wizard serves you a short list of presets ready
to compare and use.
Uncompromising Effects
The M2000 gives you access to a stunning array of Reverb, Pitch-shifting, Delays, Chorus,
Dynamics etc. Among the included reverbs you?ll find the unique Co-efficient Optimized
Room Emulator or C.O.R.E. Reverb? based upon TC?s famous reverberation Technology.
Another unique feature in the M2000 is the Dynamic Morphing. This function enables you to
apply e.g. Chorus to a vocal at low volume levels, while the same effect is being morphed into
flanging at high levels giving the signal a totally new dynamic dimension.
The Sensation
The M2000 is fully prepared for the digital age with Digital I/O connectors, S/PDIF and the
professional format AES/EBU. However, specifications never tell the whole story. What really
matters is how your final mix sounds. This is where TC?s long experience and know-how in high-end
studio signal processing becomes important.
More Features
250 factory presets, including Delay, Reverb, Ambience, Pitch, Dynamics, EQ + more.
True stereo Twin Engine processing with six different routings available.
Dynamic Morphing? and Patch Glide with adjustable glide times.
20bit Analog Conversion (105dB Dynamic Range A to D): 10Hz-20Khz bandwidth
AES/EBU (24bit) and SPDIF (24bit) digital I/O. + 16bit dithering tool for DAT output.
Wizard Help menus assist user in preset choices on an easy to read scrolling bit-mapped display.
Tap tempo and MIDI tempo Delay presets. Tap tempo button and footswitch jack.
Both 128 user and 128 Combi-user presets + 4 snapshot memories.
Universal auto-switching power supply (100-240V.)
| PRICE DOES NOT INCLUDE VAT
Features
Advanced Hardware for Superior Sound
The latest 20-bit analog-to-digital and digital-to-analog conversion technology-sampling at 44.1kHz. Frequency response extends all the way from 20 Hz to 20 kHz; dynamic range is an extraordinary 106dB; noise and distortion are neglible.
Stereo Configuration with Balanced Inputs and Outputs
A true 2-in/2-out stereo configuration that allows stereo sources to be processed without disrupting the original stereo image. Stereo inputs and outputs are all electronically balanced, with XLR and TRS phone jack connectors.
Preset, Internal, and Card Memory
180 memory locations "on board“. 80 of these are read-only memory. The remaining 100 are writable memory locations. Plug-in memory cards hold an extra 100 effect programs each.
Three-stage Effect Configuration
In addition to the main effects, the SPX990 provides programmable pre and post effects that can be used to refine and polish your sound.
In-depth Programming Power
The SPX990 has 4 programmable pre effects, 36 programmable main effects, and 3 programmable post effects.
Tempo-based Delay Time Programming
Delay time parameters can be programmed in terms of tempo or note length. Delay time can also be entered via a footswitch or MIDI clock data.
Superior Pitch Precision
The SPX990 achieves faultless pitch tracking through a new dynamic waveform analysis technique. In addition to the simple parallel pitch tracking the SPX990's "intelligent" pitch change creates appropriate harmony based on a specified key and scale type.
External Parameter Control
The SPX990 allows two selected parameters from each program to be assigned to two external MIDI controllers.
MIDI Control
The SPX990 allows MIDI selection of all programs, and real-time control of up to two selected effect parameters at the same time.
4 Pre-Effects
1. 3-band PEQ *1, 2. Compressor *1, 3. Harmonic Driver *1, 4. Compressor, Dist. and EQ *3 *1= 2 IN - 2 OUT, *2 = 1 IN - 2 OUT, *3 = 1 IN, 1 OUT
36 Main Effects: Reverb, Early Reflections, Delay and Echo, Modulation
REVERB: Reverb *2, Filtered Reverb *2, Stereo Reverb *1, Echo Room *2; EARLY REFLECTIONS: Thin Early Reflection *2, Fat Early Reflection *2, Gate Reverb *2, Reverse Gate *2; DELAY and ECHO: Delay L, C, R *2, Echo *2, Multi Tap Delay *2, Stereo Echo *1, Tempo Mono Echo *2, Tempo Stereo Echo *1, Tempo Quad Echo *1; MODULATION: Flanger *1, Dual Flanger *1, FM Chorus *1, AM Chorus *1, Phaser *1, Symphonic *1 *1= 2 IN - 2 OUT, *2 = 1 IN - 2 OUT, *3 = 1 IN, 1 OUT
Main Effects continued: Pitch Change, Pan, Complex Effects, Freeze
PITCH CHANGE: Mono Pitch Change *3, Dual Pitch Chance *2, Triple Pitch Chance *2, Stereo Pitch Change *1; PAN: Auto Pan *2, Triggered Pan *2; COMPLEX EFFECTS: Chorus and Reverb *2, Symphonic and Reverb *2, Flanger and Reverb *2, Reverb (L) / Reverb (R) *1, ER (L)/ Reverb (R) *1, Echo (L) / Reverb (R) *1, Chorus (L) / Reverb (R) *1, Pan (L) / Pan (R) *1; FREEZE: Freeze *3 *1= 2 IN - 2 OUT, *2 = 1 IN - 2 OUT, *3 = 1 IN - 1 OUT
3 Post Effects
1. 3-band PEQ *1; 2. Compressor *1, Harmonic Driver *1 *1 = 2 IN - 2 OUT
Specifications
| Frequency Response |
20 Hz - 20kHz +/-0.5 dB |
CD Player
| Dynamic Range |
Above 100 dB (typical 106dB) |
Specifications
| Hum and Noise |
Below -82 dBm (Typical -88dBm) |
| Distortion |
Below 0.005% at max. level 1 kHz |
| Input/ Number of Channel |
2 (Phone Jack) |
| Input/ Nominal Level |
+4/-20dBm (Switchable) |
| Input/ Highest Input |
+24dBm (Switchable at +4dB) |
| Input/ Impedance |
20 k ohm |
| Output/ Number of Channel |
2 (Phone Jack) |
| Output/ Nominal Level |
+4/-20dBm (Switchable) |
| Output/ Highest Output |
+18dBm (Switchable at +4dB) |
| Output/ Impedance |
150 ohm |
| A/D Conversion |
20 bits |
| D/A Conversion |
20 bits |
| Sampling Freq. |
44.1kHz |
| Preset Program |
1 - 80 |
| User Memory Program |
1 - 99,00 |
| Optional Memory Card |
1 - 99,00 |
| Front Panel/ Control |
Input Level (L,R), Data Entry |
| Front Panel/ Keys |
Function Key x 6, Page Select Key x 2, Memory, Store, Edit, Bypass |
| Front Panel/ Display |
2 ch. 8 segment LED (Level Meter) 6 segment LED (Mode Indicator) 7 segment LED (Memory No.) Memory, Edit, Bypass indicators 24 chara x 2 Line LCD |
| Front Panel/ Slot |
Memory Card |
| Rear Panel/ Connectors |
Input L/R (XLR x 2, Phone jack x 2 Output L/R (XLR x 2, Phone jack x 2) MIDI In, Thru/Out (DIN 5P x 2) Trigger (Phone Jack x 1) Bypass or INC/DEC (Phone Jack x 1) |
| Rear Panel/ Switch |
In/Out Level Switch (+4dB/ -20dB x 2) MIDI Thru/ Out Switch |
| Power Requirements |
US and Canadian Models: 120V, 60Hz British Model:240V, 50Hz General Model:230V, 50Hz |
| Power Consumption |
25W |
| Dimensions |
480 x 46 x 324.4 mm |
| (W x H x D) |
(18-7/8" x 1-13/16" x 12-3/4“) (including attachments) |
| Weight |
4.6 kg (10lbs. 2oz) |
|
PRICE DOES NOT INCLUDE VAT
Gepco Passive D.I. Box-2nd Hand-
|
PRICE WITHOUT V.A.T.
The BSS FDS-334T is a 2 input / 4 output loudspeaker management system with
Features such as : Fast-access edit input and output, Each output is assignable
to either input or to sum of inputs, Navipad menu navigation, Bright blue text display,
Crossover, assignable PEQ mid-filter limiters, polarity and delay on each output,
Assignable parametric EQ and delay on each input, LED bargraphs on every input
and output, 6, 12, 18, 24 or 48dB per octave Butterworth, Bessel or Linkwitz crossover
alignments, 60 user programs, Lockable front panel mutes and level trims and MIDI control.
|
| Features | | • Dual 15-band equalizer | | | | • Constant Q | | | | • Low cut filter at 50Hz with a 12dB/Octave slope | | | | • Balanced XLR inputs and outputs | | - | | • Bal 1/4" inputs and impedance balanced 1/4" outputs | | - | | • ISO 2/3 octave frequency centers |
PRICE DOES NOT INCLUDE VAT
Longer throw faders provide more precise adjustments when equalizing a room. The SR830QXLR offers 2 channels of equalization each with 15 bands of 45mm faders. The all steel chassis construction can handle the abuse of the road, or the solace of a permanent installation.
|
Reviews
There are no reviews yet.