SAMSON S-COM PLUS Stereo Compressor/Limiter USED

Discontinued

50.00

Out of stock

CompareAdd to wishlist Submit Better Price
Availability: Discontinued Discontinued SKU: S-COM PLUS USED Category:
USED IN GOOD CONDITION. Price does not include vat The S com plus is a highly adaptable stereo compressor/limiter in an efficient single rackspace design. It is intended for situations where extra flexibility is required to optimize signal levels. It delivers essential control along with simplicity of operation. S com plus’s comprehensive and wide-ranging controls […]

 

Read more

USED IN GOOD CONDITION.

Price does not include vat

The S com plus is a highly adaptable stereo compressor/limiter in an efficient single rackspace design.
It is intended for situations where extra flexibility is required to optimize signal levels. It delivers essential
control along with simplicity of operation. S com plus’s comprehensive and wide-ranging controls provide
extensive manipulation of audio dynamics, even in the most complex situations.
Each channel features a wide range of variable control. A feature-rich Compressor section includes variable
Threshold, Ratio, Attack and Release controls. Samson’s SKD (Smart Knee Detector) circuit dynamically
adjusts the compression curve to ensure a musical result. Our exclusive AEG (Auto Envelope Generator)
function simplifies optimum settings by constantly analyzing the audio input and automatically adjusting
the attack and release parameters based on the changing level. Key Inputs and Outputs are included for
externally processing the control voltage.
The Expander/Gate features a variable threshold level and switchable release time (fast or slow). The Gate
switch changes the downward expander ratio from “light” to “hard” gating for control ranging from subtle to
an obvious effect. A dedicated Peak/Limiter with variable control provides protection against peak and
overload independently of the compressor. When used in combination with the Compressor the Peak/Limiter
offers even more precise control over dynamic levels.
A functional De-esser improves audio quality by removing “S” from vocals and sibilance from overly bright
signal sources such as cymbals. The Enhancer switch engages the EFR (Enhanced Frequency Recovery)
circuit, which restores high frequencies that are sometimes diminished by heavy compression. Extensive
metering includes Input/Output, Gain Reduction, De-esser Level, Gate Open/Close and Limit. Other S com
plus features 
 
FEATURES:

Compressor/Limiter, Expander/Gate, De-Esser with Peak Limiter
Expander/Gate with Variable Trigger Control and Switchable Fast/Slow Release
Peak Limiter with Independent Threshold Control and Peak LED
Adjustable De-Esser with independent LED Meter for Reducing Sibilance
Advanced Circuit Design Utilizing Low Noise Operational
Amplifiers and High Quality VCA’s
Servo Balanced Inputs and Outputs on XLR and 1/4″ Connectors
SKD (Smart Knee Detector) Circuit Switches from Soft to Hard Knee Based on the
Level of Input Signal Applied
AEG (Auto Envelope Generator) Mode Constantly Adjusts the Compressors Attack
and Release Times
Three-year Extended Warranty 

Weight 3.40 kg

Reviews

There are no reviews yet.

Be the first to review “SAMSON S-COM PLUS Stereo Compressor/Limiter USED”

Your email address will not be published. Required fields are marked *

Quick Comparison

SAMSON S-COM PLUS Stereo Compressor/Limiter USED removeGepco Passive D.I. Box USED removeDOD SR830 Graphic equalizer stereo USED (Made in USA) removeTC ELECTRONIC M-2000 STUDIO EFFECTS PROCESSOR(USED) Made in Denmark removeOutline FSC1 Processor For Formula Stack System -SECOND HAND- removeSAMSON S-COM 4 Four Channel Compressor-Gate Processor (USED) remove
NameSAMSON S-COM PLUS Stereo Compressor/Limiter USED removeGepco Passive D.I. Box USED removeDOD SR830 Graphic equalizer stereo USED (Made in USA) removeTC ELECTRONIC M-2000 STUDIO EFFECTS PROCESSOR(USED) Made in Denmark removeOutline FSC1 Processor For Formula Stack System -SECOND HAND- removeSAMSON S-COM 4 Four Channel Compressor-Gate Processor (USED) remove
Image
SKUS-COM PLUS USEDGEPCOSR830M2000FSC1SCOM 4 USED
Rating
Price 50.0019.00 100.00 300.00 550.00 80.00
Stock

Out of stock

Only 1 left in stock

Only 1 left in stock

Only 1 left in stock

Only 2 left in stock

Available on backorder

AvailabilityOut of stockOnly 1 left in stockOnly 1 left in stockOnly 1 left in stockOnly 2 left in stockAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

USED IN GOOD CONDITION.

Price does not include vat

The S com plus is a highly adaptable stereo compressor/limiter in an efficient single rackspace design.
It is intended for situations where extra flexibility is required to optimize signal levels. It delivers essential
control along with simplicity of operation. S com plus's comprehensive and wide-ranging controls provide
extensive manipulation of audio dynamics, even in the most complex situations.
Each channel features a wide range of variable control. A feature-rich Compressor section includes variable
Threshold, Ratio, Attack and Release controls. Samson's SKD (Smart Knee Detector) circuit dynamically
adjusts the compression curve to ensure a musical result. Our exclusive AEG (Auto Envelope Generator)
function simplifies optimum settings by constantly analyzing the audio input and automatically adjusting
the attack and release parameters based on the changing level. Key Inputs and Outputs are included for
externally processing the control voltage.
The Expander/Gate features a variable threshold level and switchable release time (fast or slow). The Gate
switch changes the downward expander ratio from "light" to "hard" gating for control ranging from subtle to
an obvious effect. A dedicated Peak/Limiter with variable control provides protection against peak and
overload independently of the compressor. When used in combination with the Compressor the Peak/Limiter
offers even more precise control over dynamic levels.
A functional De-esser improves audio quality by removing "S" from vocals and sibilance from overly bright
signal sources such as cymbals. The Enhancer switch engages the EFR (Enhanced Frequency Recovery)
circuit, which restores high frequencies that are sometimes diminished by heavy compression. Extensive
metering includes Input/Output, Gain Reduction, De-esser Level, Gate Open/Close and Limit. Other S com
plus features 
 
FEATURES:

Compressor/Limiter, Expander/Gate, De-Esser with Peak Limiter
Expander/Gate with Variable Trigger Control and Switchable Fast/Slow Release
Peak Limiter with Independent Threshold Control and Peak LED
Adjustable De-Esser with independent LED Meter for Reducing Sibilance
Advanced Circuit Design Utilizing Low Noise Operational
Amplifiers and High Quality VCA's
Servo Balanced Inputs and Outputs on XLR and 1/4" Connectors
SKD (Smart Knee Detector) Circuit Switches from Soft to Hard Knee Based on the
Level of Input Signal Applied
AEG (Auto Envelope Generator) Mode Constantly Adjusts the Compressors Attack
and Release Times
Three-year Extended Warranty 

PRICE DOES NOT INCLUDE VAT

Gepco Passive D.I. Box-2nd Hand-

Features
• Dual 15-band equalizer
 
• Constant Q
 
• Low cut filter at 50Hz with a 12dB/Octave slope
 
• Balanced XLR inputs and outputs
• Bal 1/4" inputs and impedance balanced 1/4" outputs
-
• ISO 2/3 octave frequency centers
PRICE DOES NOT INCLUDE VAT

Longer throw faders provide more precise adjustments when equalizing a room. The SR830QXLR offers 2 channels of equalization each with 15 bands of 45mm faders. The all steel chassis construction can handle the abuse of the road, or the solace of a permanent installation.

PRICE DOES NOT INCLUDE VAT

 

Art + Science = Magic

The Engineering Group at TC Electronic were given carte blanche to create the optimal studio
signal processor. Being musicians and studio engineers themselves, they know what is important
and have a feel for what you are looking for. Working on the borderline between art and science,
they created the M2000.
Designed for the artist within you, you will create magic when using the M2000.

Main features  

Magic
The M2000 provides you with a broad palette of high quality effects enabling you to
create magical effects. The true dual engine configuration allows you to run two full-
blown effects simultaneously, i.e. on two individual effects sends. The effects have
been developed for optimal sonic quality with no compromises made. This has only
been possible because our engineers succeeded in combining the latest technology
with TC's powerful DARC? chip.

Ultimate User-Interface
The user-friendly TC feature, the Recall Wizard, instantly finds the preset that suits
your need in any situation. You simply enter your preferences, such as gentle reverb
for vocal, or extra pitch for guitar and the Wizard serves you a short list of presets ready
to compare and use.

Uncompromising Effects
The M2000 gives you access to a stunning array of Reverb, Pitch-shifting, Delays, Chorus,
Dynamics etc. Among the included reverbs you?ll find the unique Co-efficient Optimized
Room Emulator or C.O.R.E. Reverb? based upon TC?s famous reverberation Technology.
Another unique feature in the M2000 is the Dynamic Morphing. This function enables you to
apply e.g. Chorus to a vocal at low volume levels, while the same effect is being morphed into
flanging at high levels giving the signal a totally new dynamic dimension.

The Sensation
The M2000 is fully prepared for the digital age with Digital I/O connectors, S/PDIF and the
professional format AES/EBU. However, specifications never tell the whole story. What really
matters is how your final mix sounds. This is where TC?s long experience and know-how in high-end
studio signal processing becomes important.

More Features

250 factory presets, including Delay, Reverb, Ambience, Pitch, Dynamics, EQ + more.
True stereo Twin Engine processing with six different routings available.
Dynamic Morphing? and Patch Glide with adjustable glide times.
20bit Analog Conversion (105dB Dynamic Range A to D): 10Hz-20Khz bandwidth
AES/EBU (24bit) and SPDIF (24bit) digital I/O. + 16bit dithering tool for DAT output.
Wizard Help menus assist user in preset choices on an easy to read scrolling bit-mapped display.
Tap tempo and MIDI tempo Delay presets. Tap tempo button and footswitch jack.
Both 128 user and 128 Combi-user presets + 4 snapshot memories.
Universal auto-switching power supply (100-240V.)

Outline FSC1 Processor-2nd Hand- FEATURING Customized functions FOC1 dedicated controller for Flyone loudspeaker system SC1 dedicated controller for Spectra loudspeaker system NC1 dedicated controller for Integra loudspeaker system MEC1 dedicated controller for Media loudspeaker system FSC1 dedicated controller for Formula Stack louds. System TFC1 dedicated controller tor Topfly loudspeaker system MRC1 dedicated controller for Road loudspeaker system TLC1 : dedicated controller for Tripla loudspeaker system Dynamically invariant filter transfer function RMS limiters on each output Subwoofer dedicated output Adjustable band gain Polarity inversion switches Muting switches   DESCRIPTION Designed with the most advanced audio technologies the Outline Controller Series are true professional active dedicated control units for some Outline loudspeaker system models. Developed to meet the most demanding requirements of the sound reinforcement applications, the Outline Controller Series provides nonstop operation with absolute stability and reliability. Only IEC approved components and parts are used in these active controllers and they are manufactured to satisfy and to be in according with safety objects stated for “electrical device” working within the limits of pertinent CE, European Community directive. Based on a plugin filter card design, the Outline Controller Series allows the operation to those Outline loudspeaker systems that needs this kind of external assistance to perform of its best. The Outline FOC1, SC1, MEC1, NC1 two ways with subbass output controllers, are designed for the Outline Flyone, Spectra, Media, Integra loudspeaker system. The Outline FSC1, TFC1, MRC1, TLC1, three ways with subbass output are designed for the Outline FormulaStack, TopFly, RoadSystem, Tripla loudspeaker system. All models have customized band splitting, filter transfer function and signal time alignment tailored to the loudspeaker system for which are designed. All models have dynamic control with loudspeaker protection purposes, obtained with RMS limiters with adjustable threshold that are available on each output. All models have a very low frequency output that can be used to drive the Outline Bass Series or Sub Series low frequency units. All models have level control on each output, polarity inverters, muting switches, subsonic filters, RMS limiters and active balanced input and outputs with XLR connectors. Perspex security cover are included. Dimensions of all models are 483mm width, 44mm height, 210mm depth. SPECIFICATIONS Product name: Outline FOCI, SC1, NCI, MEC1, FSC1, TFC1, MRC1, TLC1 Product type: Dedicated active controller Channels: 1 Ways: FOCI: 2 ways + subwoofer SC1: 2 ways + subwoofer NCI: 2 ways + subwoofer MEC1 : 2 ways + subwoofer FSC1: 3 ways + subwoofer TFC1: 3 ways + subwoofer MRC1: 3 ways + subwoofer TLC1: 3 ways + subwoofer Crossover frequencies: fixed customized Filter slope: fixed customized Filter transfer function: fixed customized Input impedance: 20 kΩ balanced Frequency response: 20-20000 Hz ± 0.3 dB Output impedance: 600Ω balanced Total harmonic distortion (THD): <0.01% Total intermodulation distortion (SMPTE): <0.01% Signal to noise ratio: > 100dBA Subsonic filter: Butterworth 18 Hz, 18 dB octave Controls: Front panel: Power on, output level, polarity, output mute, limiting threshold, input gain adjust Rear panel switches: Balanced/unbalanced input and outputs, limiters on Display: Front panel: Power on, signal present, limiting action, input overloading Connectors: XLR, Pin 1 ground, Pin 2 hot, Pin 3 cold Power supply: AC from 100 -to 240V/50-60 Hz Power consumption: 20W Dimensions and net weight: Front panel Standard EIA 19" 1 U 483mm width, 44mm height, 210 mm depth, all models 3.3 net weight. Dimensions volume and gross weight: all models, 55cm width, 8cm height, 30cm depth, volume 0.01 m3, 4.3 gross weight.  

USED IN GOOD CONDITION.

Price does not include vat

The S com 4 is a compact and versatile single-rack space device that provides
four channels of high quality dynamics processing with an Expander/Gate and
Compressor/Limiter on each channel.
The four channels operate independently or in stereo pairs. Its multi-segment LED
metering displays input/output level as well as gain reduction. The Expander/Gate
section features a continuously variable Threshold control as well as a switch for
fast or slow release times.
The Compressor/Limiter section includes variable Threshold, Ratio and Output levels.
S com 4\'s Enhancer switch restores high frequencies that are sometimes diminished
by heavy compression. This wide-ranging combination of features makes the S com
4 an efficient and versatile audio tool for a wide variety of applications. Its clean and
quiet audio characteristics make it ideal where high sonic integrity is imperative. 
 
FEATURES:

4 Channel Compressor/Limiter, Expander/Gate with Enhancer
Linkable in two Stereo pairs
Expander/Gate with variable Trigger control and switchable Fast/Slow Release
5 Segment LED meters for Input/Output levels and Gain Reduction on each channel
Advanced circuit design utilizing Low Noise Operational
Amplifiers and High Quality VCA\'s
Servo Balanced Inputs and Outputs on XLR and 1/4" connectors
SKD (Smart Knee Detector) circuit automatically switches from soft to hard knee
based on the level of Input signal applied
Individual Threshold and Ratio controls on each channel
Three-year extended warranty 

Weight3.40 kg0.50 kg3.00 kg3.00 kg7.00 kg3.40 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 3.40 kg
Weight 0.50 kg
Weight 3.00 kg
Weight 3.00 kg
Weight 7.00 kg
Weight 3.40 kg