The C03 features dual large, 19mm ultra thin diaphragm capsules which faithfully reproduce a variety of sound sources including vocals, acoustic instruments and overhead cymbals to name a few. And to expand your miking options and recording techniques, the C03 features three pickup patterns. The Cardioid pattern is great for miking applications where tight pickup […]
The C03 features dual large, 19mm ultra thin diaphragm capsules which faithfully reproduce a
variety of sound sources including vocals, acoustic instruments and overhead cymbals to
name a few. And to expand your miking options and recording techniques, the C03 features
three pickup patterns. The Cardioid pattern is great for miking applications where
tight pickup is desired, and with the Omni and Figure 8 patterns you can mic multiple
instruments, capture room sounds and expand your soundfield. The extended frequency
and fast transient response insures an accurate reproduction with linear characteristics
from bottom to top.
Features:
? Large diaphragm, multi-pattern studio condenser microphone.
? Dual 19mm capsules with 3-micron diaphragm.
? Smooth and transparent sound reproduction from bottom to top.
? Super Cardioid, Omni and Figure 8 pickup patterns provide versatility in covering a
variety of miking applications.
? Switchable 10 dB PAD for handling signals with high SPL?s (Sound Pressure Levels).
? Switchable Hi-pass Filter, 12dB per octave at 100 Hz.
? 36-52 Volt Phantom Power operation with Blue LED.
? Internal Shock-mounted capsules.
? Extended frequency response.
? Solid Die Cast construction.
? Swivel Stand Mount and Carry Case included.
Specifications:
Type Condenser Microphone
Polar Pattern Super Cardioid/Fig. 8/Omni
Frequency Response 40~18000 Hz
Sensitivity -40 dBV/pa (10mv/pa)
Rated Impedance 350Ω
Equivalent Noise level 23 dB (A weighted IEC/DIN 651)
Max. SPL 142 dB (THD? 0.5% 1000 Hz)
Dynamic Range 119 dB
Power Supply 48V Phantom Power (IEC 268-
15/DIN 45596)
Current Consumption 7.0 mA
Dimensions ? 54 x 180 mm
Weight 460g
Weight
0.60 kg
Reviews
There are no reviews yet.
Be the first to review “SAMSON C03 MULTI-PATTERN STUDIO CONDENSER MICROPHONE” Cancel reply
The C03 features dual large, 19mm ultra thin diaphragm capsules which faithfully reproduce a
variety of sound sources including vocals, acoustic instruments and overhead cymbals to
name a few. And to expand your miking options and recording techniques, the C03 features
three pickup patterns. The Cardioid pattern is great for miking applications where
tight pickup is desired, and with the Omni and Figure 8 patterns you can mic multiple
instruments, capture room sounds and expand your soundfield. The extended frequency
and fast transient response insures an accurate reproduction with linear characteristics
from bottom to top.
Features:
? Large diaphragm, multi-pattern studio condenser microphone.
? Dual 19mm capsules with 3-micron diaphragm.
? Smooth and transparent sound reproduction from bottom to top.
? Super Cardioid, Omni and Figure 8 pickup patterns provide versatility in covering a
variety of miking applications.
? Switchable 10 dB PAD for handling signals with high SPL?s (Sound Pressure Levels).
? Switchable Hi-pass Filter, 12dB per octave at 100 Hz.
? 36-52 Volt Phantom Power operation with Blue LED.
? Internal Shock-mounted capsules.
? Extended frequency response.
? Solid Die Cast construction.
? Swivel Stand Mount and Carry Case included.
Specifications:
Type Condenser Microphone
Polar Pattern Super Cardioid/Fig. 8/Omni
Frequency Response 40~18000 Hz
Sensitivity -40 dBV/pa (10mv/pa)
Rated Impedance 350Ω
Equivalent Noise level 23 dB (A weighted IEC/DIN 651)
Max. SPL 142 dB (THD? 0.5% 1000 Hz)
Dynamic Range 119 dB
Power Supply 48V Phantom Power (IEC 268-
15/DIN 45596)
Current Consumption 7.0 mA
Dimensions ? 54 x 180 mm
Weight 460g
Behringer C-2 2 Matched Studio Condenser Microphones
2 Matched Studio Condenser Microphones
2 matched condenser microphones for stereo studio recording and live applications
Ideal as main and support microphones for studio and live applications
Cardioid pickup pattern for effective feedback elimination
Low-mass diaphragm for ultra-wide frequency response and ultimate sound reproduction
Switchable low-frequency roll-off and input attenuation
Ultra low-noise transformerless FET input eliminates low-frequency distortion
Excellent Source Isolation
Our C-2 mics also feature a low-frequency rolloff switch to eliminate infrasonics (mic handling noise, sound created by creaky stages), as well as a switchable -10 dB input pad to accommodate hot signals, such as a really loud vocalist or overzealous cellist.
The cardioid pickup pattern provides unparalleled sound source separation and feedback rejection. C-2 mics contain ultra low-noise transformerless FET input circuitry that can handle extreme dynamics with a maximum sound pressure level of 136 dB. So even if the featured performer at your next recording session or live show happens to be a revved-up jet engine, this workhorse mic will not distort!
Sound That Astounds
Every stitch of these mics is designed to deliver beautiful sound. Beginning with the gold-plated 3-pin XLR connector, you get the highest signal integrity.
Once connected to your system, youʼll notice these twin pro-caliber microphones have a 4 dB boost in the 1 kHz - 8 kHz range. For those of you new to condenser mics, this basically means youʼll get a slightly brighter sound that will give the perfect shape to cymbals and overhead miking. Acoustic pianos and choirs also benefit greatly from this type of frequency response.
Excellent Source Isolation
The cardioid pickup pattern provides unparalleled sound source separation and feedback rejection. C-2 mics contain ultra low-noise transformerless FET input circuitry that can handle extreme dynamics with a maximum sound pressure level of 136 dB. So even if the featured performer at your next recording session or live show happens to be a revved-up jet engine, this workhorse mic will not distort!
Our C-2 mics also feature a low-frequency rolloff switch to eliminate infrasonics (mic handling noise, sound created by creaky stages), as well as a switchable -10 dB input pad to accommodate hot signals, such as a really loud vocalist or overzealous cellist.
You Are Covered
We always strive to provide the best possible Customer Experience. Our products are made in our own MUSIC Group factory using state-of-the-art automation, enhanced production workflows and quality assurance labs with the most sophisticated test equipment available in the world.
As a result, we have one of the lowest product failure rates in the industry, and we confidently back it up with a generous 3-Year Warranty program.
Acoustical operating principle
Pressure gradient transducer
Directional pattern
Cardioid
Frequency range
20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohms
18 mV/Pa
Rated impedance
50 ohms
Rated load impedance
1000 ohms
Equivalent SPL CCIR 468-3
21 dB
Equivalent SPL DIN/IEC 651
10 dB-A
S/N ratio CCIR 468-3
73 dB
S/N ratio DIN/IEC 651
84 dB
Maximum SPL for THD 0.5%
140 dB
Maximum output voltage
13 dBu
Dynamic range of the microphone amplifier DIN/IEC 651
130 dB
Supply voltage
48 V ± 4 V
Current consumption
3 mA
Matching connectors
XLR 3F
Weight
480 g
Diameter
49 mm
Length
175 mm
The RODE NT1-A has become an industry standard; delivering the warmth, extended dynamic range, clarity and high SPL capability usually only featured by some of the most expensive microphones.
Now available as the \'Complete Vocal Recording Solution\' this NT1-A package now includes everything you need to get truly professional vocal recordings - the world\'s quietest studio microphone, a studio grade pop shield and shock mount, a premium 20\' cable, dust cover, an instructional DVD with recording tips, and of course R DE\'s industry leading ten year warranty.
Large 1" (25mm) capsule with gold plated diaphragm
Cardioid polar pattern
Self noise of only 5dB (A)
Ultra low noise, transformerless surface mount circuitry
Cardioid polar pattern for multiplicity of vocal and instrument applications
The earlier model C 3000 has had a large fan club in the project studio and home recording worlds for years. For the new C 3000 B, AKG designed a special 1-inch large-diaphragm transducer that closely approximates the vibration performance of top-class studio microphones, but can be made at much lower cost.
Due to its surface area and special capsule tuning, the C 3000 B large-diaphragm transducer produces an exceptionally pleasing, smooth sound. Unlike in the C 3000, the switchable 10-dB preattenuation pad immediately follows the transducer in the signal path, thus increasing the C 3000 B\'s SPL capability by a true 10 dB. Loud sound sources are therefore no problem.
An acoustically optimized cardioid polar pattern makes the C 3000 B an excellent choice for both recording and live sound applications where high gain before feedback is paramount.
Polar pattern
cardioid
Frequency range
20 to 20,000 Hz
Sensitivity
25 mV/Pa (-32 dBV)
Max. SPL
140/150 dB (k=0,5%)
Equivalent noise level (CCIR 468-3)
25 dB
Equivalent noise level
14 dB-A
Signal/noise ratio (A-weighted)
80 dB
Preattenuation pad
10 dB, switchable
Bass filter
6 dB/octave below 500 Hz
Impedance
200 ohms
Recommended load impedance
>1000 ohms
Supply voltage
9 to 52 V phantom power to DIN 45596
Current consumption
Connector
3-pin XLR
Finish
silver gray
Net weight
320 g / 11.3 oz.
Shipping weight
950 g / 2.1 lbs.
Patent(s)
Electrostatic transducer (Patent no. AT 395.225, DE 4.103.784, JP 2.815.488)
Large diaphragm cardioid microphone
Pressure gradient transducer with with one-diaphragm capsule
Transformerless circuitry
Extremely low noise: 7 dB-A
Includes swivel mount
Straightforward handling for homerecording and professional studios
High-quality professional equipment for limited budgets
Acoustical operating principle
Pressure gradient transducer
Directional pattern
Cardioid
Frequency range
20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm
23 mV/Pa
Rated impedance
50 ohms
Rated load impedance
1 kohms
Equivalent noise level, CCIR1)
17.5 dB
Equivalent noise level, A-weighted1)
7 dB-A
Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL)
76.5 dB
Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL)
87 dB
Maximum SPL for THD 0.5%2)
138 dB
Maximum output voltage
13 dBu
Dynamic range of the microphone amplifier (A-weighted)
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.