SAMSON STUDIO GT ACTIVE STUDIO MONITOR GT 2x20W WITH USB (PAIR)

204.80 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
    * Active studio monitors with USB audio interface     * 4.25-inch magnetically shielded, inverted cone, copolymer woofer     * 1-inch silk dome high frequency driver     * 2 x 20 watts of internal stereo power     * Two combination mic and instrument/line inputs     * Two 1/8-inch stereo headphone outputs with level controls     […]

 

Read more

    * Active studio monitors with USB audio interface
    * 4.25-inch magnetically shielded, inverted cone, copolymer woofer
    * 1-inch silk dome high frequency driver
    * 2 x 20 watts of internal stereo power
    * Two combination mic and instrument/line inputs
    * Two 1/8-inch stereo headphone outputs with level controls
    * Includes Cakewalk® Sonar LE music production software
    * Mic and instrument/line gain control with clip LED
    * 16-bit 44.1kHz/48kHz
    * Stereo RCA and 1/8-inch aux inputs
    * 2-position switch for no-latency direct stereo and mono monitoring
    * Mix control to balance computer and audio sources
    * USB and speaker cable included

Weight 4.30 kg

Reviews

There are no reviews yet.

Be the first to review “SAMSON STUDIO GT ACTIVE STUDIO MONITOR GT 2x20W WITH USB (PAIR)”

Your email address will not be published. Required fields are marked *

Quick Comparison

SAMSON STUDIO GT ACTIVE STUDIO MONITOR GT 2x20W WITH USB (PAIR) removeFOCAL CMS-50 ACTIVE STUDIO MONITOR 2-WAY HF 50W LF 80W removeBEHRINGER B1030A Active studio monito -Unit- removeADAM A77X Active Studio Monitor 100W removeFOCAL Solo6 Be ACTIVE STUDIO MONITOR removeRCF MYTHO 8 ACTIVE TWO-WAY 8" DSP MONITORING SYSTEM remove
NameSAMSON STUDIO GT ACTIVE STUDIO MONITOR GT 2x20W WITH USB (PAIR) removeFOCAL CMS-50 ACTIVE STUDIO MONITOR 2-WAY HF 50W LF 80W removeBEHRINGER B1030A Active studio monito -Unit- removeADAM A77X Active Studio Monitor 100W removeFOCAL Solo6 Be ACTIVE STUDIO MONITOR removeRCF MYTHO 8 ACTIVE TWO-WAY 8" DSP MONITORING SYSTEM remove
Image
SKUGTCMS 50E005223A77XSolo6 BeMYTHO8
Rating
Price 204.80 incl. GR VAT 565.00 incl. GR VAT 164.00 incl. GR VAT 1,175.00 incl. GR VAT 995.00 incl. GR VAT 976.50 incl. GR VAT
Stock

In stock

In stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityIn stockIn stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

    * Active studio monitors with USB audio interface
    * 4.25-inch magnetically shielded, inverted cone, copolymer woofer
    * 1-inch silk dome high frequency driver
    * 2 x 20 watts of internal stereo power
    * Two combination mic and instrument/line inputs
    * Two 1/8-inch stereo headphone outputs with level controls
    * Includes Cakewalk® Sonar LE music production software
    * Mic and instrument/line gain control with clip LED
    * 16-bit 44.1kHz/48kHz
    * Stereo RCA and 1/8-inch aux inputs
    * 2-position switch for no-latency direct stereo and mono monitoring
    * Mix control to balance computer and audio sources
    * USB and speaker cable included


The CMS 50 is the most compact monitoring loudspeaker of all the Focal Professional range. Its design permits listening from 50cm away, while still keeping the possibility of the monitors at a great distance from one another without damaging the soundstage. The 5” mid-woofer reaches down to 55Hz, while offering a controlled bass and a totally linear midrange. The midrange register of the CMS 50 has unequalled neutrality in its price range. The Al-Mg inverted dome tweeter offers outstanding dynamics and a degree of definition in the treble that allow precise measurement of reverb and other effects which are normally very difficult to assess.

 

Specifications
Frequency response (+/-3dB) : 55Hz - 28kHz
Maximum SPL : 107dB SPL (peak @ 1m)

Input :

Balanced 20 kOhms / Unbalanced 47 kOhms
Connector XLR / RCA

HF amplifier stage : 50W RMS, class AB
LF amplifier stage : 80W RMS, class AB

Electric supply :

Mains voltage: 220 - 230V (1.6A fuse rating)
120V (3.5A fuse rating)
100V (4A fuse rating)
IEC inlet and detachable power cord

Adjustment :

- Adjustable sensitivity, +4dBu / 0 / -10dBV
- Adjustable volume, -66dB / 0dB
- Adjustable high-pass filter, idle / 45 / 60 / 90Hz (12dB/oct.)
- Adjustable LF Shelving, 0 / -4 / -2 / +2dB
- Adjustable HF Shelving, 0 / -4 / -2 / +2dB
- Parametric filter (160Hz), adjustable, 0 / -2 / -4 / -6dB
- Power ON/OFF switch, mains voltage selector
- STANDBY/ON switch

Indicators :

Power ON / OFF LED
Standby / ON LED
Audio Clip LED

Woofer : 5" Focal drive unit, Polyglass cone
Tweeter : Aluminum/Magnesium inverted dome Focal tweeter
Shielding : Integral by cancellation magnet
Construction : Reinforced and damped Aluminum cabinet

Finish :

Black powder cabinet

Dimensions with spikes : 289.5 x 190 x 201mm (11.4" x 7.5" x 7.9“)
Dimensions with table stand : 299.5 x 190 x 201mm (11.8" x 7.5" x 7.9“)
Net weight : 7.7kg - (17lb)

 

High-Resolution, Active 2-Way Reference Studio Monitor with 5.25" Kevlar Woofer

  • Ultra-linear studio monitor with true active design
  • Precision Class A/B amplifiers with active protection circuits: 50 W for LF / 25 W for HF
  • Ultra-high resolution, ferrofluid-cooled 1" dome tweeter for ultimate sound reproduction
  • Long-throw 5.25" woofer with deformation-resistant Kevlar cone for ultimate bass response
  • Ultimate dispersion characteristics and extremely large "sweet spot" owing to advanced wave guide technology
  • High-precision crossover network with 4th order Linkwitz-Riley filters
  • Adjustable to a wide range of acoustic conditions
  • Separately controlled limiter for low and high frequency overload protection
  • Magnetic shielding allows placement near computer monitors
  • “Planet Earth" power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
  • Servo-balanced inputs with XLR, 1/4" and unbalanced RCA connectors
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by BEHRINGER Germany
 A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring.

Driver technology

Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.

The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image.

Amplifiers / controls

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.

Review samples:

“… a refreshing change“
"… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012

“… wide and spacious soundstage with solid left/right imaging“
"… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012

Subwoofer
Number1 / 1
Basket Ø7" (175 mm) / 7" (175 mm)
Voice coil Ø1.5" (38 mm) / 1.5" (38 mm)
Cone materialCarbon / rohacell / glass / Carbon / rohacell / glass
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Subwoofer1
TypePWM
Amp. power RMS / music100 W / 150 W
Subwoofer1
TypePWM
Amp. power RMS / music100 W / 150 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 75 W
Control panel
Input Sensitivity-∞ to +14 dB
High Shelf EQ > 5 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
LocationRear
General data
PanelFront
Frequency response38 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.5 %
Long term output≥114 dB
Max. peak≥122 dB
Crossover frequencies400 / 3000 Hz
Input impedance30 KOhm
Weight28.2 lb (12,8 kg)
Magnetically shieldedOptional
Height x Width x Depth9.5" (235 mm) x 21" (530 mm) x 11" (280 mm)
Warranty5 Years

 

The Solo6 Be monitor will surprise you in the very first minutes you spend with it, partly due to its size/extended bass response (40Hz at -3dB). The 6.5" "W” composite sandwich mid-woofer combines neutrality in the midrange, fullness in the midbass register and bass control. Its compactness and the choice of a large front laminar port guarantee easy integration in studios that need a near field monitor without any acoustic compromise. The user settings on the back of the Solo6 Be, combined with its compactness, make it easy to carry and to adjust according to the acoustics of each studio.

 

Specifications
Frequency response : 40Hz - 40kHz
Maximum SPL : 113dB SPL (peak @ 1m)

Input :

Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV

Bass/mid-range : 150W rms, BASH® technology
Treble : 100W rms, AB class

Electric supply :

Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire

Visualization and control :

Input sensitivity selector
Adjustable tweeter and woofer levels with potentiometers
Power On/off switch
Voltage selector

warning light : Power on LED

Electric supply :

Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire

Woofer : 6W4370B, 6-1/2" (16.5cm) Focal "W" composite sandwich cone speaker
Tweeter : Focal TB871 Beryllium inverted dome tweeter
transducer shielding : Integral through cancellation magnets or by magnet design
Box : 7-1/2" (19mm) MDF panels

Finish :

Dark red natural veneering side panels, black body

Dimensions (HxWxD) : 13 x 9-7/16 x 11-7/16 " (330x240x290mm)
Weight : 24.2lb (11kg)

 

MYTHO 8 is a two-way reference studio monitor equipped with two separate AB amplifiers - 200 W for the low frequencies and 100 W for the high - unparalleled for low distortion and natural sound. It features a high quality large metal dome tweeter for the best vocal reproduction and a 8” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.

The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. Thanks to the deeper low frequencies reproduced by its 8” woofer, the MYTHO 8 is perfect for medium to large control rooms.
A dedicated high quality DSP is provided on board. The cabinet is made in aluminium, internally braced and reinforced to improve low frequencies behaviour and reduce resonances.
 

Acoustical Specifications
Frequency Response -3 dB:35 Hz÷ 20 kHz
Max SPL:116 dB 
Horizontal coverage angle:110° 
Vertical coverage angle:70° 
Compression Driver:1" neo, metal dome 
Woofer:8" neo, ICC technology 
INPUT/OUTPUT SECTION
Input connectors:combo XLR/Jack 
Input sensitivity:-6/+6 dBu 
PROCESSOR SECTION
Crossover frequencies:1800 Hz 
Protections:thermal, excurs., rms 
Limiter:soft limiter 
Controls:bass tilt, roll-off, treeble tilt, desktop, DSP controlled 
AMPLIFIER SPECIFICATIONS
High frequencies:100 Watts 
Low frequencies:200 Watts 
Cooling:convection 
Connections:vde 
CABINET
Cabinet Material:die cast aluminum 
Hardware:orientation adjustable stand 
PHYSICAL SPECIFICATIONS
Height:430/17 mm/inch 
Width:310/12.2 mm/inch 
Depth:300/11.8 mm/inch 
Net Weight:16.150/35.60 Kg/Lbs

 

Weight4.30 kg7.70 kg7.00 kg13.00 kg11.00 kg20.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 4.30 kg
Weight 7.70 kg
Weight 7.00 kg
Weight 13.00 kg
Weight 11.00 kg
Weight 20.00 kg