SAMSON XM610 – Powered Mixer 6CH. 2x300W 4Ω

The XM610 gives you all the features you need for solid professional sound reinforcement.
With 600 watts of total system power there's more then enough power to fill your favorite
bar, club, or whatever venue you're playing

FEATURES:
6-channel, 600-watt powered mixer featuring a high-impact molded plastic Kickback?
chassis
Studio quality 24-bit DSP effects with 100 selectable presets of reverb, delay and chorus
Channel strips featuring low noise mic pre-amps with available 48-volt phantom power,
3-band equalization, DSP effect and monitor sends
7-band graphic EQ for both the main and monitor outputs.
Solid construction with convenient carry handle for easy transport

SPECIFICATIONS:
Rated Output power 300W/4Ω@0.1% THD at
1KHz per amplifier
Frequency response 20Hz~20KHz+/-0.5dB@1W
Output into 8Ω (AMP OUT);
20 Hz~20KHz+/-
0.4dB@+4dB Output into
10kΩ (MAIN OUT, MONITOR
OUT, AUX 2 SEND)
Total Harmonic Distortion Less than 0.06% @ 20Hz~
20KHz, 75W output into
4Ω (AMP OUT); Less than
0.1%@20 Hz~20KHz +4dBu
output into 10KΩ (MAIN OUT,
MON OUT, AUX 2 SEND)
HUM & Noise -121dB equivalent input noise
(Average, RS+150Ω) -100dB residual output noise
(MAIN OUT, MONITOR OUT,
AUX 2 OUT)
(with 22Hz~22KHz BPF) -79dB (MAIN OUT, MONITOR
OUT) Master level control at
maximum, all channel level
controls at minimum; -79dB
(AUX 2) Master level control
at maximum, all channel level
controls at minimum
Maximum Voltage Gain 67dB CH IN (MIC) to AMP OUT
48dB CH IN (MIC) to MAIN OUT, MONITOR OUT
54dB CH IN (MIC) to AUX 2 OUT
30dB CH IN (MIC) to REC OUT
32dB CH IN (LINE) to MAIN OUT, MONITOR OUT
26dB AUX IN to MAIN OUT
24dB TAPE IN to MAIN OUT
Crosstalk 1KHz 70dB adjacent input, 70dB
input to output
Input Channel Equalization
HIGH 12KHz shelving (+/- 15dB
maximum)
MID 2.5KHz peaking (+/- 12dB
maximum)
LOW 80Hz shelving (+/- 15dB
maximum)
Meters 7 POINT LED METERS (-20,
-10, -7, -4, 0, +3, +6dB)
Graphic Equalizer 7 bands (63, 160, 400, 1K,
2.5K, 6.4K, 16KHz)
Internal DSP Effects 24 BIT - 10 Presets each:
1 - Performance; 2 - Hall
Reverb, 3 - Plate Reverb;
4 - Spring Reverb; 5 - Echo;
6 - Flange + Verb; 7 - Chorus
+ Verb; 8 - Echo + Verb; 9-
Chorus; 10- Flange
Phantom Power +48V
CLIP Indicators Turn on: THD> 0.1%
Foot Switch DIGITAL EFFECT MUTE: ON/OFF
Power Requirement 110V-240V, 50/60Hz
Power Consumption 350W 1/8 power, 900W MAX.
Weight 40 lbs. (18.2Kg)
Dimensions (W x H x D) 21 1/4? x 13 1/4? x 13 3/4?
540mm x 338mm x 348mm

• 2 x 400W / 4 ohms stereo power amplifier for Main L/R or Mono/Monitor
• DFX, our 32/40-bit digital multi-effect processor with 16 programs plus parameter control
• 9 balanced Mic inputs and 12 Line inputs
• Two super Hi-Z inputs specially optimized for direct instrument inputs
• 3-band EQ on channels 1 through 9
• Dual multi-band graphic equalizers with in/out switches for Main L/R and Monitor or Main L/R
• Rumble filter for Mic inputs
• Pad control on channels 1-6
• Monitor and effect sends on each input channel
• +48V phantom power for mic inputs 1 through 6
• Two built-in limiters
• Rec out with trim control for record level matching
• Mains power switchable between 115 VAC and 230 VAC
• USB record/playback module records WAV files to removable flash drive and plays back MP3/WMA files
• USB recorder and playback device for capturing all performances with ease

Manual

•     Ultra-compact 2 x 1000-Watt stereo powered mixer
•     Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and  super-light weight
•     9 "Invisible” IMP mic preamps with switchable +48 V phantom power for condenser microphones
•     Ultra-high quality KLARK TEKNIK FX processor with 25 presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
•     "Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
•     14-channel mixer section features 6 mono and 4 stereo channels
•     Effective, extremely musical 3-band EQ, switchable Pad and Clip LEDs on all mono channels
•     Dual 9-band graphic EQs allow precise frequency correction of monitor and main outputs
•     Selectable stereo (main L/R), double mono (main/monitor) or bridged mono amplifier operation mode
•     Adjustable stereo Aux input for connecting external signal sources
•     Internal switch-mode power supply, noise-free audio, superior transient response and very low power consumption
•     3-Year Warranty Program*
•     Designed and engineered in Germany

EUROPOWER PMP2000D:
The amazing PMP2000D Powered Mixer packs 2,000 Watts of high-efficiency Class-D output power, while maintaining an incredible power-to-weight ratio. With 14 available input channels, the PMP2000D features 9 of our premium-grade "Invisible" IMP mic preamps with switchable +48 V phantom power, 4 stereo channels, an ultra-high quality KLARK TEKNIK FX processor with 25 presets including studio-class reverbs, delays, pitch shifter and various multi-effects - and dual 9-band stereo graphic EQs. Top it all off with "Wireless-ready" operation, thanks to our high-quality ULM digital wireless microphones (sold separately), and the PMP2000D is the ideal, easy to use, and ready for anything live sound solution!

Class-D - Massive Power, Perfect Sound:
Thanks to our revolutionary Class-D amplifier technology, we are able to provide you with enormous power and incredible sonic performance in an easy-to-use, ultra-portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency - and eliminating the need for heavy power supplies and massive heat sinks. This amazing technology makes it possible to design and build extremely-powerful products that are significantly lighter in weight than their traditional counterparts, while using less energy and protecting the environment.

Massive Mono or Stunning Stereo:
The powerful PMP2000D gives you the choice of 2 x 1,000-Watt stereo, 2 x 1,000-Watt dual mono (1 Mains powered output, 1 Monitor powered output), or 2,000-Watt bridged mono modes. Whether the center of attention happens to be a folk trio, a speech, or a synth-rock band with mind-boggling stereo patches, the PMP2000D can accommodate all of them with ease. This sonic versatility also makes this outstanding powered mixer an excellent choice for churches where vocals and stereo recordings often share face time.

Outstanding "Invisible" Mic Preamps
The EUROPOWER PMP2000D\'s six mono inputs (plus 3 of the 4 stereo channels) feature our ultra-low noise, high-headroom IMP "Invisible" mic preamps, which have been praised by audio professionals all over the world. These studio-grade mic preamps off er a staggering 130 dB of dynamic range, with a bandwidth that extends from below 10 Hz to over 200 kHz, and are perfectly matched to every conceivable microphone - with up to 60 dB gain and a +48 V phantom power supply. Armed with these superb mic preamps, the PMP2000D provides exceptionally-transparent and crystal-clear sonic performance - making it the ideal choice for both live sound and studio recording applications.

KLARK TEKNIK - The Reverb that Made History:
KLARK TEKNIK is recognized worldwide as one of the most prestigious British audio companies, with a 40-year pedigree and even a TEC Lifetime Achievement Award to back it up. The Company has designed and manufactured products for world-class artists, and their legendary DN780 reverb processor is considered by leading audio engineers around the world as the industry standard. Check out their website to learn more about KLARK TEKNIK\'s legendary heritage.
BEHRINGER is proud to incorporate custom-engineered KLARK TEKNIK effects into their products. Featuring 25 world-class presets to choose from including reverb, chorus, flange, delay, pitch shift and many other amazing effects, KLARK TEKNIK created the 24-bit, studio-grade effects engine for BEHRINGER - to give your performance that truly professional finishing touch.

Own the Stage with Digital Wireless:
Get wireless-ready with the built-in, dedicated connectivity of our ULTRALINK ULM Series wireless microphone system (to be ordered separately). Wireless gives you maximum freedom and mobility without the need to run cables. The highest-quality sound is provided thanks to the ULM\'s digital, license-free 2.4 GHz frequency spectrum.
The ULM wireless system combines professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Just plug in the ULM receiver "dongle“, and instantly you have an exceptional wireless mic system. Freeing you from cables is the simple and easy way to own the stage.

Getting Connected:
Use the 2-Track RCA inputs to feed in external stereo signals; conversely, the 2-Track RCA outputs can be used to send line-level signals from the mixer to a recording device. Powered outputs on the PMP2000D are available in the professional, twist-lock Speakon-compatible variety. In addition you\'ll find a convenient 1/8" (35 mm) Aux In jack for connecting your smartphone or mp3 device for playing backing tracks, or prerecorded music during your breaks.

• FLS Feedback Locating System
• Master Mute for channels 1-7
• Footswitchable effects defeat
• Combination XLR and 1/4 input jacks
• RCA, 1/8" Media input
• Selectable 9-Band Graphic EQ with FLS
• Selectable Main or Monitor dual power section
• RCA Record outputs
• LED Meter bridge
• Digital effects parameter control
• Power amp sub-sonic filtering
• On-board 24- bit digital effects with mute button
• Clip light and signal present indicator
• Kosmos-C
• Main line level 1/4" output
• Mid-Morph EQ
• DDT Speaker protection circuit
• 48 Volt Phantom Power
• Bluetooth? streaming audio
• Weight Unpacked: 10.44 kg
• Weight Packed: 11.8 kg
• Width Packed: 35.56 cm
• Height Packed: 55.88 cm
• Depth Packed: 34.925 cm

This innovative product comes in a very modern and user-friendly design. It combines finest analogue input circuitry and operating surface with the advantages of its digital master and amplifier section making for a new dimension of flexibility in its class. The acoustical performance meets everything that you have come to expect from a quality Dynacord product.

Its feature package includes: 5 MIC/LINE input channels with compressor / limiter and talk-over function, 3 Stereo Inputs including Jack, RCA and USB connectors, onboard player for MP3 or WAV audio files, high quality effects section with 32 editable presets, 3 Master outputs with 7-band EQ each and flexible signal routing options, delay line for Master-B (150 msec / 50m), headphones control, LPN speaker processing, class-D  2 x 450W RMS respectively 2 x 600W / 4 Ohms IHF-A power, micro-controlled power supply (100V – 240V), Direct-Drive option for 100V speaker lines, comprehensive protection package, live and install connectivity, optional rack mount kit.

The input structure of the PM 502, along with the entire feature package and connectivity, positions this mixer at the heart of many installations ranging from Bistros, small clubs, lounges, boutiques, hotel bars and lobbies to churches, mosques and a wide range of similar applications. Further the PM 502 is an extremely versatile tool for a multitude of live applications. It will be the ideal choice for entertainers, DJs and small bands looking for a compact and light-weight solution for live applications or rehearsal venues. The onboard MP3-Player on the front, allows the user to easily play pre-recorded music from a USB stick or a hard drive. The digital USB interface on the rear also allows for basic recording.

Channels (mono + stereo)
5 + 3
Microphone inputs
5 x XLR/Jack socket
Auxiliaries (FX, AUX)
1 Post, 1 Pre
Rated output power, 20-20000 Hz, THD -
into 4 Ω
640 W
into 8 Ω
350 W
Max. dual channel output power, dynamic headroom, IHF-A
-
into 4 Ω
2 x 600 W
into 8 Ω
2 x 340 W
Max. single channel output power, continuous, 1 kHz, THD = 1%
-
into 4 Ω
500 W
into 8 Ω
280 W
Max. midband output power, 1 kHz, THD = 1%, dual channel
-
into 4 Ω
2 x 450 W
into 8 Ω
2 x 270 W
Rated output power, 20-20000 Hz, THD -
into 4 Ω
2 x 400 W
into 8 Ω
2 x 240 W
Max. output power, Direct Drive mode (bridge configuration), continuous, 1 kHz, THD = 1%
-
into 12 Ω
680 W
Maximum output voltage, power amplifier, 1 kHz, no load
-
Dual channel mode
52 Vrms
Direct Drive mode
100 Vrms
THD, at 1 kHz, MBW = 22 kHz
-
MIC input to master A L/R outputs, +10 dBu, typical
MIC iput to speaker output
DIM 30, MIC input to speaker output, 3.15 kHz, 15 kHz
IMD-SMPTE, MIC input to speaker outputs, 60 Hz, 7 kHz
Frequency response, -3 dB, ref. 1 kHz
-
Any input to any Mixer output
15–22000 Hz
Any input to Speaker output
20–22000 Hz
Microphone mute switch attenuation
-
Amplifier Ch1/Ch2
Channel to channel
Microphone mute switch attenuation
> 100 dB
Channel VOL and FX/AUX send attenuation
> 85 dB
CMRR, MIC input, 1 kHz
> 80 dB
Input sensitivity, all level controls in max. position
-
MIC
-65 dBu (435 μV)
LINE (mono)
-45 dBu (4.35 mV)
LINE (stereo)
-27 dBu (34.6 mV)
CD (stereo)
-27 dBu (34.6 mV)
All other outputs (impedance balanced)
-
MIC inputs, GAIN at min. position
+11 dBu
Mono line inputs, GAIN at min. position
+30 dBu
Stereo line inputs
+26 dBu
PHONES output
+21 dBu
MASTER A, B, AUX outputs
+11 dBu
Input impedances
-
MIC
2 kΩ
CD
10 kΩ
All other inputs
> 15 kΩ
Output impedances
-
PHONES
47 Ω
All other outputs (impedance balanced)
150 Ω
MASTER VOLUME down
-129 dBu
Noise, channel inputs to MASTER A L/R outputs, MBW = 22 kHz, Aweighted
-
MASTER VOLUME down
-99 dBu
MASTER VOLUME center, all channel volume down
-90 dBu
MASTER VOLUME center, all channel volume center
-85 dBu
Signal-to-noise ratio, power amplifier, A-weighted, 450 W, 4 Ω
104 dB
Output stage topology, amplifier
Class D
Equalization
-
Low shelving filter
±15 dB / 60 Hz
Mid peak filter
±12 dB / 2.4 kHz
High shelving filter
±15 dB / 12 kHz
Master EQ 7-band (63, 160, 400, 1k, 2.5k, 6k, 12k Hz)
±10 dB / Q = 1.5
Filter
-
Low-cut filter, microphone processing (switchable)
80 Hz, 18 dB/oct. or 150 Hz, 12 dB/oct.
Low-cut filter, amplifier (engaged in Direct Drive mode)
50 Hz or 70 Hz, 18 dB/oct.
Speaker processing
LPN, switchable
Delay MASTER B, selectable
0–145 ms (0–50 m)
Effects
-
Type
Stereo 24/48-bit multi effects processor
Effect presets
32 factory presets, user editable
Remote control
Footswitch
Display
128 x 64 pixels, LCD
Audio player (USB at front panel)
-
Switching mode power supply (μC controlled)
FAT 32
Supported audio file formats
MP3, WAV
Interface
USB2.0, female type A
USB power supply, max. rated current (short circuit proof)
5 V, 500 mA
Digital audio interface (USB at rear panel)
-
Channels
2 in, 2 out
AD/DA conversion
16-bit, delta-sigma
Sampling rate
32/44.1/48 kHz
PC interface
USB2.0, female type B
Protection
-
MASTER A, B, AUX outputs
Adjustable peak limiters, -10 – +11 dBu
Amplifier
Audio limiters, high temperature, DC, HF, short circuit, peak current limiters, turn-on delay, back EMF
Switching mode power supply (μC controlled)
Inrush current limiters, mains over/undervoltage, mains over current, high temperature
Cooling
Continuous speed controlled fan
Phantom power, switchable
48 V DC
AC power input
100–240 V AC, 50–60 Hz
Power consumption, at 1/8 maximum output power, 4 Ω
180 W
Safety class
I
Operating temperature
5° to 40° C (40° to 105° F)
Product dimensions (Width x Height x Depth)
395 x 244 x 241 mm Rack-mount: 483 x 223 x 310.3 mm (7 HU)
Net weight
4.9 kg
Shipping weight
6.4 kg
 

• • Ultra-compact 500-Watt powered mixer
  • Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
  • Ultra-high quality KLARK TEKNIK FX processor with 25 presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
  • Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies for easy feedback removal
  • “Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
  • 5-channel mixer section features 5 mic/line channels plus separate Aux input

• 5 high-quality mic preamps with switchable Pad and Clip LEDs
• Effective, extremely musical 2-band EQ on all channels
• 7-band graphic EQ allows precise frequency correction
• 2 speaker outputs on 1/4" jack connectors
• Internal switch-mode power supply, noise-free audio, superior transient response and very low power consumption
• Rack mount brackets included
• 3-Year Warranty Program*
• Conceived and designed by BEHRINGER Germany