Content | Scan-Speak Discovery, 22W/4534G00, 8" Midwoofer, 4 ohm
- NRSC Fibre Glass Cone; Scan-Speak Patented Technology
- Fibre Glass dust cap
- High sensitivity 92dB
- Long Linear excursion
- 30Hz Resonance Frequency
- Diecast Aluminium basket
- Vents below spider
- Low damping rubber surround
Madisound recommends:
- 0.55 cubic foot (15.5 ltrs) sealed, F3 70
- 1 cubic foot (28 ltrs) vented, 2" x 6“, F3 49
The GF series is designed for the discerning audiophile customer. To meet the needs of this audience, several new technologies were developed with the goal of lowering distortion and damping in the speaker. The coated fiberglass cone reduces vibration and standing waves, and the vented motor system minimizes power compression. The combined result is a very open and dynamic sound.
The 22W/4434G has the same frame size and should be considered as a replacement for the PL22WO09-04 or the MG22WO09-04. |
- 93 dB sensitivity 1 W / 1 m
- 200 W + 80 W Power Handling
- 2" + 1.75" Sandwich Voice Coil
- Single Point Source providig coherent Wave Front
- 90° conical Dispersion
- Optimal for compact 2- or 3-way Systems
|
Product type
Loudspeaker Chassis
Type
PA
Nominal Diameter
8 "
Nominal Diameter
200 mm
Voice Coil
1.46 "
Voice Coil
37 mm
Overall diameter
209.2 mm
Pitch Circle Diameter
196.9 mm
Cut- out Measurement
178 mm
Mounting holes
8
Diameter of fixing holes
6 mm
Depth
89 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
130 W
maximum rated load
260 W
Sensitivity (1 W / 1 m)
95 dB
Frequency response
60 - 5000 Hz
Voice Coil Material
Aluminum
Magnet
Ferrite
Depth of the magnetic gap
6 mm
Thiele & Small Parameter
Fs (Resonance Frequency)
80 Hz
Re (DC resistance)
5.9 Ohm(s)
Qms (mechanical quality)
13
Le (inductance of the voice coil)
0.44 mH
Qes (electrical quality)
0.66
Qts (overall quality)
0.63
Vas (equivalent volume)
13.6
Mms (moving mass)
15 g
BL (power factor)
8.2 T/m
Xmax (maximum displacement)
4.67 mm
Cms (elasticity of the suspension)
0.36 mm/N
Sd (membrane area)
191 cm²
Rms (mechanical loss resistance)
0.6 kg/s
Weight
2,2 kg
| The B&C Speakers 8NDL51-16 is an efficient and lightweight cast frame 8" neodymium driver. Its ventilated voice coil gap ensures long term power handling and reduced power compression, and a copper cap on the pole piece reduces inductance and extends high frequency response. The 8NDL51-16 is highly recommended for compact 2-way speaker systems or as the midbass/midrange element in high-output 3-way and 4-way designs.
- Great for line arrays and horn loading
- Neodymium magnet assembly
- Ventilated voice coil gap for reduced power compression
- Inductance-reducing copper cap on pole piece extends HF response
- 2" copper voice coil on polyimide former
- 400 watts continuous program power capacity
- 65 - 3,000 Hz response
|
- 95.5 dB sensitivity 1 W / 1 m
- 200 W + 80 W Power Handling
- 2" + 1.75" Aluminum Sandwich Voice Coil
- Single Point Source providing coherent Wave Front
- 90° conical Dispersion
- Optimal for compact 2-way Systems
- Ligh weight Carbon Fiber Diaphragm
|
50 mm (2 in) copper voice coil
70 - 3000 Hz response
94 dB sensitivity
Neodymium magnet allows a very light yet powerful motor assembly
Shorting copper cap for extended HF response
400 W continuous program power capacity
Ventilated voice coil gap for reduced power compression
Compatible with NEXO PS8
- Specifications
- Nominal diameter200 mm (8.0 in)
- Nominal impedance8 Ω
- Minimum impedance6.6 Ω
- Nominal power handling *200 W
- Continuous power handling *400 W
- Sensitivity (1W/1m) *94.0 dB
- Frequency range65 - 3000 Hz
- Voice coil diameter51 mm (2.0 in)
- Winding materialCopper
- Former materialGlass Fibre
- Winding depth17 mm (0.65 in)
- Magnetic gap depth8 mm (0.31 in)
- Flux density1.05 T
- Design
- Surround shapeDouble Roll
- Cone shapeExponential
- Magnet materialNeodymium Inside Slug
- SpiderSingle
- Pole designStraight Pole
- Woofer cone treatmentTWP Waterproof Both Sides
- Recommended enclosure14.0 dm3 (0.49 ft3)
- Recommended tuning65 Hz
- Parameters *
- Fs66 Hz
- Re5.3 Ω
- Qes0.41
- Qms3.6
- Qts0.37
- Vas14.0 dm3 (0.5 ft3)
- Sd220.0 cm2 (34.1 in2)
- η₀1.0 %
- Xmax7.0 mm
- Xvar7.0 mm
- Mms28 g
- Bl12.4 Txm
- Le0.5 mH
- EBP160 Hz
- Mounting And Shipping Info
- Overall diameter225 mm (8.8 in)
- Bolt circle diameter210 mm (8.3 in)
- Baffle cutout diameter187.0 mm (7.4 in)
- Depth90 mm (3.5 in)
- Flange and gasket thickness11 mm (0.4 in)
- Air volume occupied by driver1.1 dm3 (0.04 ft3)
- Net weight1.8 kg (4.0 lb)
- Shipping units1
- Shipping weight2.2 kg (4.8 lb)
- Shipping box300x160x180 mm (11.8x6.3x7.1 in)
|
Reviews
There are no reviews yet.