Content | Scan-Speak Discovery, 22W/4534G00, 8" Midwoofer, 4 ohm
- NRSC Fibre Glass Cone; Scan-Speak Patented Technology
- Fibre Glass dust cap
- High sensitivity 92dB
- Long Linear excursion
- 30Hz Resonance Frequency
- Diecast Aluminium basket
- Vents below spider
- Low damping rubber surround
Madisound recommends:
- 0.55 cubic foot (15.5 ltrs) sealed, F3 70
- 1 cubic foot (28 ltrs) vented, 2" x 6“, F3 49
The GF series is designed for the discerning audiophile customer. To meet the needs of this audience, several new technologies were developed with the goal of lowering distortion and damping in the speaker. The coated fiberglass cone reduces vibration and standing waves, and the vented motor system minimizes power compression. The combined result is a very open and dynamic sound.
The 22W/4434G has the same frame size and should be considered as a replacement for the PL22WO09-04 or the MG22WO09-04. |
Nominal Specifications - Nominal Diameter 8“, 200 mm
- Overall Diameter 8.81/8.18“, 223.7/207.9 mm
- Bolt Circle Diameter 8.27“, 210 mm
- Baffle Cutout Diameter 7.20“, 183 mm
- Depth 3.88“, 98.5 mm
- Flange and Gasket Thickness 0.43“, 10.8 mm
Electrical Specifications - Minimum Impedance 6.4 Ohm
- Nominal Impedance 8 Ohm
- Nominal Power Handling*** 200 W
- Maximum Power Handling**** 400 W
- Sensitivity (1W/1m) 97 dB
- Frequency Range 80 - 6300 Hz
- Voice Coil Diameter 2“, 52 mm
- Winding Material Aluminium
- Former Material Glass Fiber
- Winding Depth 0.39“, 9.8 mm
- Magnetic Gap Depth 0.31“, 8 mm
- Flux Density 1.3 T
THIELE & SMALL Parameters - Resonant Frequency (fs) 90 Hz
- DC Resistance (Re) 5.3 Ohm
- BL Product (BL) 13 N/A
- Diaphragm Mass inc. Airload (Mms) 23 grams
- Mechanical Compliance of Suspension (Cms) 0.14 mm/N
- Rms 1.53 Kg/s
- Electromagnetic Q (Qes) 0.41
- Mechanical Q (Qms) 8.5
- Total Q (Qts) 0.39
- Compliance Equivalent Volume (Vas) 0.29 ft³, 8.26 dm³
- Surface Area of Cone (Sd) 32.09“², 207 cm²
- Maximum Linear Excursion (Xmax)* 3.57 mm
- Xdamage** 10.65 mm
- Coil Inductance (Le) 0.41 mH
- Diaphragm mass (Mmd) 21.2 g
- Eta Zero 1.44 %
Notes
- *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
- **Maximum excursion before permanent damage
- ***2 Hours Test According to AES 2-1984 Rev. 2003
- ****Maximum power is defined as 3dB greater than nominal power
|
- 94 dB sensitivity 1 W / 1 m
- 250 W Power handling
- 2" voice coil
- Double treated cone for water protection
- Neodymium magnet system
- Tripie aluminum demodulating rings for ultra low distortion
- Optimal for compact 2-way systems
- Light weight carbon fibre diaphragm
|
Nominal Specifications - Nominal Diameter 8“, 200 mm
- Overall Diameter 8.81/8.18“, 223.7/207.9 mm
- Bolt Circle Diameter 8.27“, 210 mm
- Baffle Cutout Diameter 7.20“, 183 mm
- Depth 3.88“, 98.5 mm
- Flange and Gasket Thickness 0.43“, 10.8 mm
Electrical Specifications - Minimum Impedance 7 Ohm
- Nominal Impedance 8 Ohm
- Nominal Power Handling*** 200 W
- Maximum Power Handling**** 400 W
- Sensitivity (1W/1m) 95 dB
- Frequency Range 70 - 5000 Hz
- Voice Coil Diameter 2“, 52 mm
- Winding Material Aluminium
- Former Material Glass Fiber
- Winding Depth 0.65“, 16.5 mm
- Magnetic Gap Depth 0.31“, 8 mm
- Flux Density 1.15 T
THIELE & SMALL Parameters - Resonant Frequency (fs) 65 Hz
- DC Resistance (Re) 5.7 Ohm
- BL Product (BL) 13.5 N/A
- Diaphragm Mass inc. Airload (Mms) 25,3 grams
- Mechanical Compliance of Suspension (Cms) 0.24 mm/N
- Rms 3.38 Kg/s
- Electromagnetic Q (Qes) 0.32
- Mechanical Q (Qms) 3.1
- Total Q (Qts) 0.29
- Compliance Equivalent Volume (Vas) 0.46 ft³, 12.9 dm³
- Surface Area of Cone (Sd) 30.38“², 196 cm²
- Maximum Linear Excursion (Xmax)* 6.92 mm
- Xdamage** 15.7 mm
- Coil Inductance (Le) 0.46 mH
- Diaphragm mass (Mmd) 23.7 g
- Eta Zero 1.06 %
Notes
- *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
- **Maximum excursion before permanent damage
- ***2 Hours Test According to AES 2-1984 Rev. 2003
- ****Maximum power is defined as 3dB greater than nominal power
|
- 95.5 dB sensitivity 1 W / 1 m
- 200 W + 80 W Power Handling
- 2" + 1.75" Aluminum Sandwich Voice Coil
- Single Point Source providing coherent Wave Front
- 90° conical Dispersion
- Optimal for compact 2-way Systems
- Ligh weight Carbon Fiber Diaphragm
| BETA Serie 225W- 350W
Recommended for professional audio mid-bass applications or as a woofer in vented enclosures. Also suitable
as a mid-bass speaker in sealed enclosures.
SPECIFICATION
- Nominal Basket Diameter 8“, 203.2 mm
- Nominal Impedance 8 ohms
- Power Rating Watts 225 W / Music Program 450 W
- Resonance 65 Hz
- Usable Frequency Range 78 Hz - 4.5 kHz
- Sensitivity 95.1
- Magnet Weight 34 oz.
- Gap Height 0.312“, 7.92 mm
- Voice Coil Diameter 2“, 50.8 mm
THIELE & Small Parameters
- Resonant Frequency (fs) 65 Hz
- DC Resistance (Re) 5.99
- Coil Inductance (Le) 0.49 mH
- Mechanical Q (Qms) 4.95
- Electromagnetic Q (Qes) 0.42
- Total Q (Qts) 0.38
- Compliance Equivalent Volume (Vas) 23.3 liters / 0.82 cu. ft.
- Peak Diaphragm Displacement Volume (Vd) 63 cc
- Mechanical Compliance of Suspension (Cms) 0.37 mm/N
- BL Product (BL) 9.6 T-M
- Diaphragm Mass inc. Airload (Mms) 16 grams
- Efficiency Bandwidth Product (EBP) 156
- Maximum Linear Excursion (Xmax) 3.0 mm
- Surface Area of Cone (Sd) 210.0 cm²
- Maximum Mechanical Limit (Xlim) 7.4 mm
MOUNTING Information
- Recommended Enclosure Volume
Sealed 5.7-9.9 liters/0.2-0.35 cu.ft.
Vented 8.5-19 liters/0.3-0.67 cu.ft.
- Overall Diameter 8.24“, 209.2 mm
- Baffle Hole Diameter 7.13“, 181 mm
- Front Sealing Gasket fitted as standard
- Rear Sealing Gasket fitted as standard Mounting Holes Diameter 0.22“, 5.5 mm
- Mounting Holes B.C.D. 7.75“, 196.9 mm
- Depth 3.5“, 89 mm
MATERIALS of Construction
- Aluminum voice coil
- Polyimide former
- Ferrite magnet
- Vented core
- Pressed steel basket
- Paper Cone
- Cloth cone edge
- Solid composition pape dust cap
|
Reviews
There are no reviews yet.