Scanspeak D2606 920000 1” Dome Tweeter 6Ω

No longer available!

39.42 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Availability: No longer available! No longer available! SKU: D2606 920000 Category:
Τhe Discovery series offer traditional design, superior sound, a solid construction, and a wide range of variants. Combining these elements – plus a wealth of technical features and finesses – it gives our customers the possibility of acquiring a tailor-made Scan-Speak solution with very good performance at a reasonable low price point! KEY FEATURES: High […]

 

Read more

Τhe Discovery series offer traditional design, superior sound, a solid construction, and a wide range of variants. Combining these elements – plus a wealth of technical features and finesses – it gives our customers the possibility of acquiring a tailor-made Scan-Speak solution with very good performance at a reasonable low price point!

KEY FEATURES:
High Performance Tweeter
Low Damping Ferrofluid Cooling
Linear response faceplate, Neutral Design
Coated Textile Diaphragm
High Stability
Dampened Cavity in Pole Piece

dome tweeter
6 Ohm
Hing Performance tweeter
Coated SIlk Fabric Diaphragm
Low Damping Ferrofluid Cooling
Hing Stability
0,5 Kg
Μέγεθος: 1“
Αντίσταση (Ohm): No
Ευαισθησία: 91.36 db
Power (RMS): 100 W
Power (Music): 200 W
Διάμετρος Τρύπας: 72 mm
Βάθος Μεγαφώνου: 27.1 mm

 

Weight 0.15 kg

Reviews

There are no reviews yet.

Be the first to review “Scanspeak D2606 920000 1” Dome Tweeter 6Ω”

Your email address will not be published. Required fields are marked *

Quick Comparison

Scanspeak D2606 920000 1'' Dome Tweeter 6Ω removeB & C Speakers DE-45 Driver 60 WRMS, 106dB, titaniox removeJBL 2450J NEODYMIUM DRIVER 4' 150W 16Ω removeJBL COMPRESSION DRIVER 4' 150W 8Ω removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeB & C Speakers DE-1050 Driver 2", 140W, 109dB, 0.5-20kHz Titanium diaphragm remove
NameScanspeak D2606 920000 1'' Dome Tweeter 6Ω removeB & C Speakers DE-45 Driver 60 WRMS, 106dB, titaniox removeJBL 2450J NEODYMIUM DRIVER 4' 150W 16Ω removeJBL COMPRESSION DRIVER 4' 150W 8Ω removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeB & C Speakers DE-1050 Driver 2", 140W, 109dB, 0.5-20kHz Titanium diaphragm remove
Image
SKUD2606 920000DE-452450J2446HDE-16DE-1050
Rating
Price39.42 incl. GR VAT 136.15 incl. GR VAT 1,465.00 incl. GR VAT 901.03 incl. GR VAT 99.20 incl. GR VAT 524.22 incl. GR VAT
Stock

Out of stock

Available on backorder

In stock

Available on backorder

Only 1 left in stock (can be backordered)

In stock

AvailabilityOut of stockAvailable on backorderIn stockAvailable on backorderOnly 1 left in stock (can be backordered)In stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentΤhe Discovery series offer traditional design, superior sound, a solid construction, and a wide range of variants. Combining these elements - plus a wealth of technical features and finesses - it gives our customers the possibility of acquiring a tailor-made Scan-Speak solution with very good performance at a reasonable low price point! KEY FEATURES: High Performance Tweeter Low Damping Ferrofluid Cooling Linear response faceplate, Neutral Design Coated Textile Diaphragm High Stability Dampened Cavity in Pole Piece dome tweeter 6 Ohm Hing Performance tweeter Coated SIlk Fabric Diaphragm Low Damping Ferrofluid Cooling Hing Stability 0,5 Kg Μέγεθος: 1“ Αντίσταση (Ohm): No Ευαισθησία: 91.36 db Power (RMS): 100 W Power (Music): 200 W Διάμετρος Τρύπας: 72 mm Βάθος Μεγαφώνου: 27.1 mm  

1” high frequency compression driver, titanium
diaphragm, flat aluminium wire voice coil, low distortion,
extremely good response from 1.5 kHz. to 18 kHz.

Specifications1
Throat Diameter 25 mm. (1 in.)
Nominal Impedance 8 Ω
Minimum Impedance 7.6 Ω
Power Handling
(1500 –20000 Hz)
Nominal2 60 W
Continuous Program3 120 W
Sensitivity (1W/1m)4 106 dB
Frequency Range 1 – 18 kHz
Recommended Crossover5 1.5 kHz
Voice Coil Diameter 44 mm. (1.7 in.)
Winding Material Aluminium
Inductance 0.11 mH
Diaphragm Material Titanium
Flux Density 1.7 T
Also available in 16 Ω, data upon request

Mounting and Shipping Informations
Two M6 holes 180° on 76 mm. (3 in.) diameter
Three M6 holes 120° on 57 mm. (2.2 in.) diameter
Overall Diameter 134 mm. (5.3 in.)
Depth 68 mm. (2.7 in.)
Net Weight (1 unit) 2.9 Kg. (6.4 lb.)
Shipping Weight (4 units) 12.5 Kg. (27.5 lb.)
Shipping Box (4 units) 300x160x180 mm.
(12x6.3x7.1 in.)
1 Driver mounted on B&C ME 45 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within
the specified range . Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal
rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 1000 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.

150W AES compression driver, 4 διάφραγμα τιτανίου, coherent wave phasing plug, neodymium rare-earth magnet assembly, 16Ω

150W AES compression driver, 4 διάφραγμα τιτανίου, coherent wave phasing plug, 8Ω

DE-16 Driver 60WRMS, 106dB, 2.5-20k 1" high frequency compression driver. Low mass mylar diaphragm ensures a very flat frequency response and optimized ceramic magnet assembly allows for high sensitivity and low distortion up to 18 kHz. Specifications1 Throat Diameter 25 mm (1 in) Nominal Impedance 8 Ω Minimum Impedance 7.8 Ω Power Handling (2200 –20000 Hz) Nominal2 30 W Continuous Program3 60 W Sensitivity (1W/1m)4 107 dB Frequency Range 1.5 – 18 kHz Recommended Crossover5 2.2 kHz Voice Coil Diameter 44 mm (1.7 in) Winding Material Aluminium Inductance 0.11 mH Diaphragm Material Mylar Flux Density 1.5 T Mounting and Shipping Information Two M6 holes 180° on 76 mm (3 in) diameter Overall Diameter 102 mm (4 in) Depth 58 mm (2.3 in) Net Weight (1 unit) 1.6 kg (3.5 lb) Shipping Weight (8 units) 13.9 kg (30.6 lb) Shipping Box (8 units) 220x220x150 mm (8.7x8.7x5.9 in) 1 Driver mounted on B&C ME 45 horn. 2 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance. 3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 1000 to 18000 Hz. 5 12 dB/oct. or higher slope high-pass filter.
280 W continuous program power capacity
2” horn throat diameter
100 mm (4 in) aluminium voice coil
Titanium diaphragm
500 – 20000 Hz response
109 dB sensitivity
Neodymium magnet allows a very light yet powerful motor assembly
Shorting copper cap for extended HF response
Weight0.15 kg2.00 kg10.00 kg5.00 kg1.70 kg3.40 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.15 kg
Weight 2.00 kg
Weight 10.00 kg
Weight 5.00 kg
Weight 1.70 kg
Weight 3.40 kg