Content |
A powerful performance. Go for XS WIRLESS 1 and rely on a solid wireless transmission with up to 10 compatible channels in a stable UHF band.
The XS WIRELESS 1 BRASS SET is an easy to use all-in-one wireless system, especially designed to provide a powerful
live sound for brass instruments. The set includes an intuitive stationary receiver for quick set-up and hassle-free handling, as well as a compact bodypack transmitter and a rugged condenser gooseneck microphone.
FEATURES
- Versatile gooseneck microphone with outstanding sound reproduction from the renowned evolution microphone series
- Antenna-switching diversity reception
- Integrated antennas
- Automatic frequency management and synchronization via remote channel for easy setup
- Selectable UHF frequencies within a large bandwidth
- Up to 10 compatible channels
- Microphone condenser
- THD, total harmonic distortion ? 0.9%
- Pick-up pattern cardioid
- Signal-to-noise ratio ? 103 dBA
- RF output power 10 mW
- Switching bandwidth up to 24 MHz
- Operating time approx. 10 hrs
- Modulation wideband FM
- Output voltage 1/4" (6.3 mm) jack socket (unbalanced): +6 dBu, XLR socket (balanced): +12 dBu
- Housing rugged ABS housing
- Frequency 8 frequency banks, each with up to 10 factory-preset channels
- Frequency range A: 548-572 MHz, GB: 606-630 MHz
- B: 614-638 MHz
- C: 766-790 MHz
- D: 794-806 MHz
- E: 821-832 MHz, 863-865 MHz
- K: 925-937.5 MHz
- Sensitivity
- SPL for peak deviation 147 dB
- Squelch adjustable from 3 dBμV to 28 dBμV (combined with pilot tone)
- Synchronization 2.4 GHz, Low Power OQPSK (only active during synchronization)
- Input sensitivity 1.5 mV / Pa
- Audio adjustment range 45 dB, adjustable in 5-dB steps
- Line / Mic level 20 dB, switchable
- Temperature Range operation: 0°C to +40°C, storage: –20°C to +70°C
- Receiver Principle double superheterodyne
- Diversity principle antenna switching diversity via internal antennas
TECHNICAL DATA
Receivers
- Dimensions approx. 200 x 42 x 127 mm
- Weight approx. 340g
- Power supply Receiver: 12 V DC nom. / 300 mA
- AF frequency response Receiver: 50 to 16,000 Hz (–3 dB)
Transmitter
- Dimensions approx. 71 x 96 x 28 mm
- Weight approx. 95g
- Power supply Transmitter: 2 AA size batteries, 1.5 V
WHAT'S IN THE BOX?
-
1 receiver EM-XSW 1
-
1 gooseneck microphone e908T
-
1 bodypack transmitter SK-XSW
-
1 power supply NT 12-5 CW
- 2 AA batteries
|
VWTTM
Exclusive VWT (Virtual Wire Transmission) technology ensures full-range frequency response, excellent transient response, and wide dynamic range - just like a high-quality guitar cable.
Superior specs.
Relay digital wireless systems produce full-range tones with 10Hz-20kHz frequency response, exceedingly low noise with up to 120dB dynamic range, and studio-quality resolution with 24-bit A/D conversion. (Comparably priced analog wireless systems offer 50Hz-15kHz frequency response and >90dB dynamic range. This wreaks havoc on your tone, especially if you use a high-gain amp.)
Cable tone simulation.
Using a cable and a wireless system? Now you can switch back and forth without having to adjust the tone settings on your amplifier. Relay digital wireless systems feature a Cable Tone Simulator, which lets you match the sound of your Relay to the sound of your cable.
Compander free.
Companders squash your signal and ruin your tone. Analog wireless systems require companders but Relay wireless systems do not. Remaining compander-free enables Relay to deliver a beautiful high-end sparkle, thunderous low-end punch, and touch response that analog wireless systems simply cannot deliver.
| Metal 1U Rack System | Transmission Format | Line 6 proprietary digital audio transmission | Frequency Response | 10Hz - 20kHz | Dynamic Range | 120 dB | RF Carrier Frequency | 2.4GHz | Operating modes | RF1
RF2 | Compatible Channels | 14 | Transmission Range | 300 feet line-of-sight (may vary due to local conditions) | FCC Approval | Part 15 approved, no user-license required | Transmitter Specs | | TBP12 Transmitter | A/D Conversion | 24-bit Delta Sigma, 128 times oversampling | Input Impedance | 1.3 M-Ohm | Connectors | TA4f | Controls | Power On/Off, Channel Select | LEDs Display | Power, Audio Status | LCD Display | Channel Number, Battery Life | Battery Life | Approx. 8 hours (2x AA alkaline batteries) | Receiver Specs | | RXR12 Receiver | D/A Conversion | 24-bit Delta Sigma, 128 times oversampling | Connections | 1/4-inch output, XLR output; Tuner pass-thru | LEDs Display | Audio Status, Transmitter Battery Life, Mute, RF | LCD Displays | Channel Number, Transmitter Battery Life | Controls | Channel select, Cable Tone Simulator, Setup | Power Requirements | IEC connector for internal switching power supply that works worldwide |
| The sense of freedom that comes with a wireless kit can't be beaten. The freedom to move around the stage during a song, the ability to walk out across the floor during sound check to hear how your band sound to the audience, that moment where you end standing proudly on the bar amidst a cheering crowd. Wireless kits give you so much more choice when performing. (cheering crowd and irritated bartender sold separately)
Even if leaping from the stage isn't for you, the WMS 40 is still a great choice for sound. AKG have a great reputation for quality and tone. Crystal clear sound and high end transmission and receiving technology means no loss of sound quality, a common issue with some cheaper wireless kits.
Plug and Play
The WMS40 Mini wireless microphone system provides crystal clear sound and is a true plug'n'play solution. Up and running in a second, it is the optimum wireless solution for small stages, clubs, places of worship, hotels, and gyms. The system is available in different application optimized set packages, all of which includes a universal, switched mode power supply for worldwide operation.
Long lasting
The WMS40 Mini system stands out for its extremely long battery life of 30 hours with a single AA battery which helps saving money in the long run
Dual input/output
Unlike a lot of wireless kits that only handle 1 signal at a time the Mini2 allows you to either have 2 guitars setup and ready with the same reciever or to give the spare trnasmitter to your second guitarist/ bass player. This means less equipment to carry around and less clutter on stage. You can even make quick guitar changes with each running through an independant channel. No more unclipping and unplugging your transmitter while the audience waits.
Features
- Up to 30 hours playtime with one single AA battery
- Plug and Play
- Gain control on pocket transmitter
- Compatible with all AKG MicroMics
- Low battery indicator
- The WMS 40 Mini2 Instrumental Set Dual ensures brilliant sound and ease of use at an unbeatable price/performance ratio.
Unique HDAP (High Definition Audio Performance) technology ensures the best possible, most realistic sound at any time.
The SR 40 Mini2 receiver provides three status LEDs each for channels 1 and 2, indicating ON/OFF status, received signal strength (RF OK), and audio clipping (AF CLIP). The VOLUME control sets the level at the ¼" output jack. Each receiver comes with a universal 12-V switched mode power supply with EU, UK, and US adapters. The illuminated ON/OFF button switches both channels on and off simultaneously.
The PT 40 Mini bodypack is probably the smallest and lightest transmitter in its class. A reliable mini XLR input allows you to connect every compatible AKG miniature microphone. Battery life is the same legendary 30 hours off a single AA battery as for the standard WMS 40 models, reducing the need to replace batteries and thus saving real money in the long run.
The system includes an SR 40 MINI2 receiver, 2 PT 40 MINI bodypack transmitters, 2 MKG L instrument cables, a universal power supply with US/UK/EU adapters, and 2 AA size dry batteries.
Features
- Up to 30 hours playtime with one single AA battery
- Plug and Play
- Gain control on pocket transmitter
- Compatible with all AKG MicroMics
- Low battery indicator
Specifications
Audio
- Audio Frequency bandwidth 40 to 20000 Hz
- Signal to Noise 110 dB-A
- THD at 1 kHz 0.8 Prozent
- Operating temperature range -10 to 55 Celsius
- Radio Sensitivity -100 dBm
- Recommended simultaneous channels 3
- Number of selectable frequencies 1 Fixed frequency
- Frequency Selection Fixed frequency
- Radio Range (Line of Sight) 20m
- Modulation FM
- Transmitter Synchronization: Not necessary
- HiQnet compatible No
- Racksize 1/3 Racksize (19“)
- Rackheight 1 RU
Outputs
- Amount 2
- Type Balanced Jack (1/4“)
- Gender Female
- Contacts 3-pin
- Note Balanced audio output adjustable from mic to line level. Output level at rated deviation: 500 mV rms
Power
- Type DC Socket
- Voltage 12 to 12 V
Design
Dimensions / Weight
- Length 132 mm
- Height 43 mm
- Width 133 mm
- Net Weight 581 g
Optional microphones for PT 40 Mini | A lightweight, low-profile wireless system that provides guitarists with 200 feet of freedom.
The Line 6 Relay G50 Digital Wireless System provides a pure signal with a clarity that rivals that of the highest-quality guitar cables. Guitars get a beautiful high-end sparkle and basses get a thunderous low-end punch, even at distances of up to 200 feet. Traditional wireless systems compromise the sound of your instrument by rolling-off crucial high- and low-end frequencies and compressing their signals. This system on the other hand, offers superior sound with full bandwidth and zero compression.
Professional Dependability
Broadcasting over the 2.4GHz band keeps the Line 6 Relay G50's signal free from many kinds of interference. Traditional wireless guitar systems are susceptible to dropouts, static, and many other kinds of interference. Broadcasting over congested UHF bands, their signals may be affected by interference generated as far away as 100 miles or more. For added security, the Relay G50 employs exclusive signal protection technology, simultaneously broadcasting encrypted data streams to multiple antennas.
Refreshing Simplicity
The Relay G50 is a low-profile wireless system that's easy to use. The lightweight transmitter remains out of the way of your performance and its LCD displays channel number and battery life. The rugged metal receiver offers bright and easy-to-read LEDs that display power, status, and battery life. Its dual 1/4" outputs make it an easy addition to your pedal board.
Attached to Your Guitar Cable?
For players attached to cables, adopting a wireless system introduces many questions: What will it feel like? Will it change my sound? The Line 6 Relay G50 sounds just like a cable, but it also sounds just like your cable. It features EQ settings that match the frequency responses of typical guitar cables. Different players use different cables, but all players can use Relay G50.
The Wireless Revolution
Relay G50 is proudly ushering in a better-sounding and more dependable era of wireless guitar systems. It will inspire you to explore new areas of your music and the stage.
The wireless guitar system comes complete with transmitter, receiver and all necessary accessories including locking cable, power supply, and batteries.
Features
200-foot range, line-of-sight
Broad 10Hz - 20kHz frequency response; Superior 120dB dynamic range; 24-bit digital conversion
8 hours of battery life (AA alkaline batteries)
Lightweight, low-profile and easy to use
Bright LEDs and LCD show power, status, and battery life
EQ presets match Relay G50 to the sound of your guitar cable
Comes complete with transmitter, receiver and all necessary accessories including locking cable, power supply and batteries
2.4GHz band is optimal for guitar wireless, FCC/DTV compliant
Multiple layers of signal protection; Encrypted data stream; Simultaneous broadcasts on multiple channels |
- The ACT-828 is an EIA standard 1U dual channel receiver with metal chassis.
- A full-color VFD (vacuum fluorescent display) provides clear viewing of all parameters. All controls are intuitive and easily accessible, allowing for quick and easy system setup via a single rotary control.
- Enhanced RF circuitry improves anti-interference characteristics and system compatibility with a 64 MHz-wide bandwidth, allowing more interference-free channels to be selected.
- New digital diversity receiving technology eliminates signal dropout and enhances receiving range.
- Full-range sound quality is not affected by the strength of RF signals or operating distance.
- Digitally-processed RF circuitry and DigitnamicPlus™ technology eliminates compander noise, assuring a wireless sound quality that easily rivals cable transmission.
- Improved proprietary Audio A/D Converter provides a true dynamic range of 115 dBA, T.H.D.
- AES3id Digital Audio Interface facilitates a direct connection to digital mixing consoles and transmits signal without distortion, ensuring a stable S/N ratio which will not deteriorate in long distance transmission.
- Proprietary 256-bit encryption provides secure audio transmission, preventing unauthorized listening.
- 10 built-in SmartEQ™ presets and user-defined microphone capsule equalization allows faithful sound reproduction to suit artistsʼ preferences.
- 10 built-in digital anti-feedback SmartEQ™ presets minimize feedback effectively without sacrificing sound quality.
- Optional MIPRO RCS2.Net software allows real-time network remote-controlling and monitoring of 64 systems.
| Frequency Range | 480~544MHz(US & EU)
540~604MHz(US & EU)
636~700MHz(EU)
696~760MHz(EU)
760~824MHz | | | Bandwidth | 64 MHz | | | Preset Frequency | 12 non-interference compatible frequencies in group 1-10.
16 non-interference compatible frequencies in group 11-16.
16 user-defined frequencies can be stored in group 18.
216 preset frequencies in total. | | | Channel Grid | 25 kHz | | | Channel Set-up | Scan & ACT sync | | | Audio Sampling | 24-bit / 44.1 kHz Rate | | | Audio Compression | 2nd Generation DSP inertial coding | | | Latency | | | | Frequency Response | 20 Hz~20 kHz (-2dB) | | | S/N Ratio (analog output) | > 115dB(A) | | | T.H.D. | | | | Encryption | 256 bit | | | Receivers | | | Chassis /Channel | EIA Standard 19 " 1U, Dual | | | Sensitivity | 15 dBμV at S/N≒118 dBA | | | Image and Spurious Rejection | > 85dB | | | Receiving Mode | Digital Diversity | | | Analog Output | Balanced XLR × 2
Unbalanced 6.3 mm (1/4 ") × 2 | | | Analog Output Switch | Mic / Line × 2 | | | Digital Audio Interface | AES3id output. BNC female × 2 | | | Digital Equalizer | 10 microphone capsule modeling presets | | | Digital Anti-feedback Equalizer | 10 anti-feedback microphone capsule modeling presets | | | PC Interface | USB or RS-232 Interface. Proprietary MIPRO ACT-BUS | | | Display | Full-color VFD | | | Battery Meter | Transmitter battery status | | | Antenna Input | 50Ω TNC Female Connector × 2 | | | Power Supply | Built-in 100~240V AC switching power supply; Power Consumption: 15W | | | Dimensions (W×H×D) | 420 × 44 × 245 mm (16.5 × 1.7 × 9.6 ") | | | Weight | Approx. 2.2 kg (4.8 lbs) | | | Transmitter | ACT-80H / 80HC Handheld, ACT-80T / 80TC Bodypack & TA-80 Plug-on Transmitter | | | Operating Temperature | -10~+60 ℃ | | | Notes | Refer to actual product in the event of product description discrepancy.
Frequency range and maximum deviation comply with the regulations of different countries. |
|
- EIA-standard half 19” metal case.
- Front panel includes ACT sync button, rotary control knob for menu settings and dual audio LED indicators.
- LCD screen displays group & channel, encryption status, RF output, stereo/mono mode.
- Lockable front panel.
- PLL-synthesized technology enables multiple preset compatible channels.
- 64MHz bandwidth.
- 112 dBA S/N ratio.
- Balanced and unbalanced audio inputs.
- Switchable Line & Microphone, adjustable sensitivity levels and up to +26 dBU maximum SPL.
- Built-in 3 bands EQ settings.
- Selectable encryption keys.
- Scan for an open, interference-free frequency.
- 6.3mm headphone monitoring jack.
- RJ-11 MIPRO ACT-BUS connector.
- Up to 100mW output power. selectable Hi, Low or Off setting.
- TNC 50Ω RF output & input connectors.
Frequency Range
|
470~664 MHz, 672~960 MHz (country dependent)
|
Bandwidth
|
64 MHz
|
Oscillation Mode
|
PLL-Synthesized
|
Channel Grid
|
25 kHz
|
Frequency Stability
|
±0.005% (-10~+60℃)
|
Modulation Mode
|
Digital Modulation
|
Output Power
|
10 ~ 100 mW (country dependent)
|
Spurious Rejection
|
|
Frequency Response
|
20 Hz ~ 15 kHz (Stereo)
|
T.H.D.
|
|
ADC Dynamic Range
|
112 dBA
|
Stereo Audio Input
|
Phone 6.3 mm Ø ×2, XLR, 6.3 mm Ø Combo Jack
|
Max. SPL
|
> +26 dBu, Selectable Line and Microphone level
|
Audio input adjustment
|
0 ~ -30 dB, 3 dB step
|
Headphone Monitor
|
6.3 mm Ø Stereo Jack with volume control
|
Impedance
|
≧ 16 Ω
|
Network Interface
|
RJ-11 × 2, proprietary MIPRO ACT-BUS
|
Antenna Connector
|
TNC (50 Ω impedance)
|
Power Supply
|
DC 12~15V
|
Dimensions (W × H × D)
|
210 × 44 × 206 mm (8.3 × 1.7 × 8.1“)
|
Weight
|
Approx. 1.1 kg ( 2.4 lbs)
|
Note
|
Refer to actual product in the event of product description discrepancy.
Frequency range and maximum deviation comply with the regulations of different countries.
|
|
Reviews
There are no reviews yet.