SENNHEISER SKM-825-XSW-B Handheld Transmitter

Product type Wireless Microphone System Accessories

SHURE SLX2-SM86-R5 - Handheld Transmitter with SM58 Microphone

PT 4000 
 
UHF bodypack transmitter with magnesium body
30 MHz wide UHF band with up to 1200 selectable frequencies
Backlit display and jog switch for ease of use
Operates for up to 15 hours on dry batteries, 12 hours on optional BP 4000 battery
pack and displays remaining battery life
Optional remote mute switch

The PT 4000 is a professional bodypack transmitter with a rugged die-cast magnesium
body. The 30 MHz wide UHF band provides up to 1200 selectable frequencies and
several preset frequency banks for various countries make it easy to set up a multichannel
system. A backlit display makes it very easy to tune the PT 4000 to the same frequency
as the SR 4000 receiver. A pilot tone system continuously transmits transmitter status
data including MUTE switch position and the remaining battery life to the receiver. Integrated
charging contacts let you charge the optional BP 4000 battery pack without having to
remove it from the transmitter.
An optional remote mute switch allows the user to mute the transmitter without having
to fumble for the on-board mute switch if the transmitter is hidden in the clothes.

Available microphones for PT 4000: C 411 L, C 416 L, C 417 L, C 418 L,
C 419 L, C 420 L, C 444 L, C 477 WR L, CK 55 L, CK 77 WR L,
CK 97-CVR WL

SPECIFICATIONS:
Carrier frequency range 650 to 680, 680 to 710, 720 to 750, 760 to 790,
790 to 820, 835 to 862 MHz
Modulation FM
Audio bandwidth 35 to 20,000 Hz
Selectable channels 1200
Max. channels for multichannel operation > 50
THD typ.

Shure SLX2-BETA87C-R5 Wireless Microphone

Features:

Automatic Transmitter Setup
Backlit LCD with timeout feature
Frequency and power lockout
3-segment battery fuel gauge
2 AA batteries (included) provide 8 hours of continuous use
518 - 782 MHz operating range

Operating Range Under Typical Conditions

100m (300 ft.)

Note: actual range depends on RF signal absorption, reflection, and

interference

Audio Frequency Response (+/? 2 dB)

Minimum: 45 Hz

Maximum: 15 kHz

(Overall system frequency depends on microphone element.)

Total Harmonic Distortion (ref. +/? 38 kHz deviation, 1 kHz tone)

0.5%, typical

Dynamic Range

>100 dB A-weighted

Operating Temperature Range

?18°C (0°F) to +50°C (+122°F)

Note: battery characteristics may limit this range

Transmitter Audio Polarity

Positive pressure on microphone diaphragm (or positive voltage applied

to tip of WA302 phone plug) produces positive voltage on pin 2 (with

respect to pin 3 of low impedance output) and the tip of the high

impedance 1/4-inch output.

SLX1 Bodypack Transmitter

Audio Input Level

-10 dBV maximum at mic gain position

+10 dBV maximum at 0 dB gain position

+20 dBV maximum at -10 dB gain position

Gain Adjustment Range

30dB

Input Impedance

1 MΩ

RF Transmitter Output

30 mW maximum (dependent on applicable country regulations)

Dimensions

108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)

Weight

81 grams (3 oz.) without batteries

Housing

Molded ABS case

Power Requirements

2 ?AA? size alkaline or rechargeable batteries

Battery Life

>8 hours (alkaline)

SLX2 Handheld Transmitter

Audio Input Level

+2 dBV maximum at -10dB position

-8 dBV maximum at 0dB position

Gain Adjustment Range

10dB

RF Transmitter Output

30 mW maximum (dependent on applicable country regulations)

Dimensions (including SM58 cartridge)

254 mm x 51 mm dia. (10 x 2 in.)

Weight

290 grams (10.2 oz.) without batteries

Housing

Molded PC/ABS handle and battery cup

Power Requirements

2 ?AA? size alkaline or rechargeable batteries

Battery Life

>8 hours (alkaline)

SLX4 Receiver

Dimensions

42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.)

Weight

816 g (1 lb. 13 oz.)

Housing

Galvanized steel

Audio Output Level (ref. +/? 38 kHz deviation with 1 kHz tone)

XLR connector (into 600 Ω load): ?13 dBV

1/4 inch connector (into 3000 Ω load): ?2 dBV

Output Impedance

XLR connector: 200 Ω

1/4 inch connector: 1kΩ

XLR output

Impedance balanced

Pin 1: Ground

Pin 2: (+)

Pin 3: (-)

Sensitivity

?105 dBm for 12 dB SINAD, typical

Image Rejection

>70 dB, typical

Power Requirements

12?18 Vdc at 150 mA, supplied by external power supply