Content |
The HANDMIC DIGITAL connects directly to the Lightning Port of iOS devices. It is based on a proven Sennheiser cardioid capsule and Apogeeʼs PureDigital pre-amp and A/D converter in a rugged all-metal housing. Max SPL up to 150 dB, good suppression of handling noise, resistance against wind noise and the EMI are typical benefits of a Sennheiser microphone.
- Sennheiser Ultralight Acoustic System: Captures every detail
- Digital Audio with Apogee: PureDigital pre-amp and A/D converter
- Shock-mounted capsule: provides excellent suppression of handling noise
- Metal body and grille: robust, rugged
- Two interchangeable cables included: allows connectivity to iPhone, iPad, iPod and Mac/PC
- Apogee´s Recording App "MetaRecorder” and "Maestro” App for microphone configuration
Delivery includes:
1 Cable 2m microUSB/ USB
1 Cable 2m microUSB/ Lightning
1 Microphone clamp
1 solid desktop stand
1 pouch
Pick Up Pattern: | Cardioid | Frequency response: | 40 – 16,000Hz | Sensitivity: | @ min. gain: –54 dBFS @ max. gain: –19 dBFS | Dimensions: | diameter 48 mm, 180 mm length | Weight: | 340 g |
| The new AT2020 USB offers studio-quality articulation and intelligibility. It plugs right into your computer's USB port, and functions seamlessly with your favorite recording software. Equipped with a USB digital output, the AT2020 USB is perfect for home studio recording, field recording, podcasting, and voiceover use.
Based on the renowned AT2020
The AT2020 USB is based on the design of Audio-Technica's critically acclaimed AT2020 cardioid condenser microphone. Like the AT2020, it features a low-mass diaphragm, custom-engineered for extended frequency response and superior transient response.
With low self-noise, the AT2020 USB is perfectly suited for sophisticated digital recording equipment. Audio-Technica's state-of-the-art design and manufacturing techniques ensure that the microphone complies with the company's renowned consistency and reliability standards.
Experience AT2020 USB. Plug it in and transform your sound.
- Side-address studio condenser with USB digital output (Windows and Mac compatible)
- Crystal-clear, natural sound for podcasting, home studio recording, field recording, and voiceover use
- Custom-engineered low-mass diaphragm provides extended frequency response and superior transient response
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Low self-noise - perfectly suited for sophisticated digital recording equipment
- Includes tripod desk stand, pivoting stand mount, USB cable & storage pouch
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 20-16,000 Hz
- Weight: 13.2 oz (374 g)
- Dimensions: 6.38" (162.0 mm) long, 2.05" (52.0 mm) maximum body diameter
- Output Connector: USB-type
- Accessories: Pivoting stand mount for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; soft protective pouch; tripod desk stand; 10' (3.1 m) USB cable
|
Reloop SPodcaster Condenser Microphone USB. Suitable for any type of broadcasting via computer, as connected directly to your PC or Mac without requiring a sound card with high-speed USB 2.0, all connections are as easy as ever. It features a condenser capsule offers us high quality recording.
Sensitivity: -65 ± 5 dB @ 1 kHz
S / N ratio: -59 dB
Frequency range: 50 Hz - 18 kHz
Connection: USB
Dimensions: 148 x 65 x 56 mm
Weight: 0.35 kg
Includes USB cable, table stand and software |
- Element: Back electret condenser
- Element diameter: 14mm
- Frequency response: 20–17,000Hz
- Sensitivity: -34dB ± 2dB (0dB = 1V/Pa @ 1kHz)
- Output: USB
- A-D converter: 48kHz / 16-bit sampling rate
- Output impedance: 100Ω ± 30% (at 1kHz)
- Load impedance: >1kΩ
- Self noise: 16dBA
- Max. SPL: 132dB (at 1kHz <1% THD)
- Signal to Noise ratio: 78dB
Microphone, USB Cable, Mic Clip
| STUDIO CONDENSER MICROPHONE C-1U
Studio Condenser Microphone with USB Audio Interface and software suite
Professional, large-diaphragm condenser microphone with built-in USB interface, ideal for podcasters and musicians
Plug this amazing USB-mic straight into your computer and turn your PC or Mac computer into a recording system without the need for any other hardware
Directly works with your PC or Mac computer—ultra-low latency ASIO and WDM drivers for PC audio optimization included
Exceptionally flat frequency response and ultra-high sound resolution perfect for voice, acoustic instruments, etc.
Cardioid pickup pattern for outstanding sound source separation and feedback rejection
Pressure-gradient transducer with shock-mounted capsule
- Professional large-diaphragm condenser microphone with built-in 48 kHz USB interface for unsurpassed audio quality
- Gets phantom power directly from PC USB output
- Comes with Audacity audio editor, Kristal audio engine, Podifier uploading software, and Juice and Podnova downloading software
- Maximum SPL (sound pressure level) of 136 dB
- Ideal as main and support microphone for studio and live applications
- Exceptionally flat frequency response and ultra-high sound resolution
- Cardioid pickup pattern for outstanding sound source separation and feedback rejection
- Ultra low-noise transformerless FET input circuitry
- LED indicates phantom power operation
- Ultra-rugged construction with die-cast body
- USB connector and swivel stand mount included
| The Pod Pack 1 is a professional upgrade to any announce studio. The kit consists of a high-quality USB condenser microphone paired with a fully-adjustable suspension boom arm, keeping the desk clear and the microphone always in position for podcasting, on-air or voice-over applications. Assembly is a snap and the articulating boom clamps securely to nearly any desk or table surface.
- Included USB cardioid condenser microphone
- All-steel construction
- Dual suspension springs for stable angle
- Fully adjustable - microphone can even be suspended upside-down
- Clamps to nearly any desk or table
- USB cable included
- Microphone
- Element: Back electret condenser
- Element Diameter: 13mm
- Polar pattern: Cardioid
- Frequency response: 20 - 17,000 Hz
- Sensitivity: -34dB +/-2dB (0dB = 1V/Pa @ 1kHz)
- Output impedance: 100Ω +/-30% (at 1kHz)
- Load impedance: >1kΩ
- Self noise: 16dBA
- Max SPL: 132dB (@ 1kHz
- Signal to Noise ratio: 78dB
- Broadcast Boom Arm
- Adjustable height and angle
- Telescoping range: 15.75" - 27.5" (40cm - 70cm)
- Weight: 13.5oz (382g)
|
Reviews
There are no reviews yet.