Content |
Set with 6.35mm TS plug-on transmitter and 6.35mm TS plug-on receiver
General Characteristics
- Wireless entry-level plug & play series operating in the 2.4 GHz spectrum for license-free worldwide use
- Lightweight, compact plug-on transmitters and receivers, offering either XLR, jack (6.3mm, 1/4”) or mini jack (3.5mm, 1/8”) connections as well as a pedalboard receiver with female jack and XLR male chassis outputs
- Intuitive single-button interface to manage all power, linking, muting and battery monitoring tasks
- Up to 5 systems can be operated simultaneously at a maximum range of up to 75m
- All portable devices feature USB re-chargeable lithium-ion batteries that provide up to 5 hours of runtime
Delivery Includes:
- XSW-D-Instrument-Tx 6.3mm jack plug-on transmitter
- XSW-D-Instrument-Rx 6.3mm jack plug-on receiver
- Belt clip
- Extension cable 6.3mm
- USB-A to USB-C charging cable
|
VWTTM
Exclusive VWT (Virtual Wire Transmission) technology ensures full-range frequency response, excellent transient response, and wide dynamic range - just like a high-quality guitar cable.
Superior specs.
Relay digital wireless systems produce full-range tones with 10Hz-20kHz frequency response, exceedingly low noise with up to 120dB dynamic range, and studio-quality resolution with 24-bit A/D conversion. (Comparably priced analog wireless systems offer 50Hz-15kHz frequency response and >90dB dynamic range. This wreaks havoc on your tone, especially if you use a high-gain amp.)
Cable tone simulation.
Using a cable and a wireless system? Now you can switch back and forth without having to adjust the tone settings on your amplifier. Relay digital wireless systems feature a Cable Tone Simulator, which lets you match the sound of your Relay to the sound of your cable.
Compander free.
Companders squash your signal and ruin your tone. Analog wireless systems require companders but Relay wireless systems do not. Remaining compander-free enables Relay to deliver a beautiful high-end sparkle, thunderous low-end punch, and touch response that analog wireless systems simply cannot deliver.
| Polycarbonate Stompbox-style System | Transmission Format | Line 6 proprietary digital audio transmission | Frequency Response | 10Hz - 20kHz | Dynamic Range | 118 dB | RF Carrier Frequency | 2.4GHz | Operating modes | RF1 | Compatible Channels | 6 | Transmission Range | 100 feet line-of-sight (may vary due to local conditions) | FCC Approval | Part 15 approved, no user-license required |
|
- The ACT-818 is a 1/2U single channel rack-mountable receiver with metal chassis.
- A full-color VFD (vacuum fluorescent display) provides clear viewing of all parameters. All controls are intuitive and easily accessible, allowing for quick and easy system setup via a single rotary control.
- Enhanced RF circuitry improves anti-interference characteristics and system compatibility with a 64 MHz-wide bandwidth, allowing more interference-free channels to be selected.
- New digital diversity receiving technology eliminates signal dropout and enhances receiving range.
- Full-range sound quality is not affected by the strength of RF signals or operating distance.
- Digitally-processed RF circuitry and DigitnamicPlus™ technology eliminates compander noise, assuring a wireless sound quality that easily rivals cable transmission.
- Improved proprietary Audio A/D Converter provides a true dynamic range of 115 dBA, T.H.D.
- AES3id Digital Audio Interface facilitates a direct connection to digital mixing consoles and transmits signal without distortion, ensuring a stable S/N ratio which will not deteriorate in long distance transmission.
- Proprietary 256-bit encryption provides secure audio transmission, preventing unauthorized listening.
- 10 built-in SmartEQ™ presets and user-defined microphone capsule equalization allows faithful sound reproduction to suit artistsʼ preferences.
- 10 built-in digital anti-feedback SmartEQ™ presets minimize feedback effectively without sacrificing sound quality.
- Optional MIPRO RCS2.Net software allows real-time network remote-controlling and monitoring of 64 systems.
| Frequency Range | 480~544MHz(US & EU)
540~604MHz(US & EU)
636~700MHz(EU)
696~760MHz(EU)
760~824MHz | | | Bandwidth | 64 MHz | | | Preset Frequency | 12 non-interference compatible frequencies in group 1-10.
16 non-interference compatible frequencies in group 11-16.
16 user-defined frequencies can be stored in group 18.
216 preset frequencies in total. | | | Channel Grid | 25 kHz | | | Channel Set-up | Scan & ACT sync | | | Audio Sampling | 24-bit / 44.1 kHz Rate | | | Audio Compression | 2nd Generation DSP inertial coding | | | Latency | | | | Frequency Response | 20 Hz~20 kHz (-2dB) | | | S/N Ratio (analog output) | > 115dB(A) | | | T.H.D. | | | | Encryption | 256 bit | | | Receivers | | | Chassis /Channel | EIA Standard 19 " 1/2U, Single | | | Sensitivity | 15 dBμV at S/N≒118 dBA | | | Image and Spurious Rejection | > 85dB | | | Receiving Mode | Digital Diversity | | | Analog Output | Balanced XLR × 1
Unbalanced 6.3 mm (1/4 ") × 1 | | | Analog Output Switch | Mic / Line × 1 | | | Digital Audio Interface | AES3id output. BNC female × 1 | | | Digital Equalizer | 10 microphone capsule modeling presets | | | Digital Anti-feedback Equalizer | 10 anti-feedback microphone capsule modeling presets | | | PC Interface | USB or RS-232 Interface. Proprietary MIPRO ACT-BUS | | | Display | Full-color VFD | | | Battery Meter | Transmitter battery status | | | Antenna Input | 50Ω TNC Female Connector × 2 | | | Power Supply | External AC power supply, 12~15V DC, 1A; Power Consumption: 7.5W | | | Dimensions (W×H×D) | 210 × 44 × 230 mm (8.3 × 1.7 × 9 ") | | | Weight | Approx. 1.1 kg (2.4 lbs) | | | Transmitter | ACT-80H / 80HC Handheld, ACT-80T / 80TC Bodypack & TA-80 Plug-on Transmitter | | | Operating Temperature | -10~+60 ℃ | | | Notes | Refer to actual product in the event of product description discrepancy.
Frequency range and maximum deviation comply with the regulations of different countries. |
|
VWTTM
Exclusive VWT (Virtual Wire Transmission) technology ensures full-range frequency response, excellent transient response, and wide dynamic range - just like a high-quality guitar cable.
Superior specs.
Relay digital wireless systems produce full-range tones with 10Hz-20kHz frequency response, exceedingly low noise with up to 120dB dynamic range, and studio-quality resolution with 24-bit A/D conversion. (Comparably priced analog wireless systems offer 50Hz-15kHz frequency response and >90dB dynamic range. This wreaks havoc on your tone, especially if you use a high-gain amp.)
Cable tone simulation.
Using a cable and a wireless system? Now you can switch back and forth without having to adjust the tone settings on your amplifier. Relay digital wireless systems feature a Cable Tone Simulator, which lets you match the sound of your Relay to the sound of your cable.
Compander free.
Companders squash your signal and ruin your tone. Analog wireless systems require companders but Relay wireless systems do not. Remaining compander-free enables Relay to deliver a beautiful high-end sparkle, thunderous low-end punch, and touch response that analog wireless systems simply cannot deliver.
| Metal 1U Rack System | Transmission Format | Line 6 proprietary digital audio transmission | Frequency Response | 10Hz - 20kHz | Dynamic Range | 120 dB | RF Carrier Frequency | 2.4GHz | Operating modes | RF1
RF2 | Compatible Channels | 14 | Transmission Range | 300 feet line-of-sight (may vary due to local conditions) | FCC Approval | Part 15 approved, no user-license required | Transmitter Specs | | TBP12 Transmitter | A/D Conversion | 24-bit Delta Sigma, 128 times oversampling | Input Impedance | 1.3 M-Ohm | Connectors | TA4f | Controls | Power On/Off, Channel Select | LEDs Display | Power, Audio Status | LCD Display | Channel Number, Battery Life | Battery Life | Approx. 8 hours (2x AA alkaline batteries) | Receiver Specs | | RXR12 Receiver | D/A Conversion | 24-bit Delta Sigma, 128 times oversampling | Connections | 1/4-inch output, XLR output; Tuner pass-thru | LEDs Display | Audio Status, Transmitter Battery Life, Mute, RF | LCD Displays | Channel Number, Transmitter Battery Life | Controls | Channel select, Cable Tone Simulator, Setup | Power Requirements | IEC connector for internal switching power supply that works worldwide |
|
WMS470 is a professional multichannel wireless microphone system with pilot tone transmission to prevent unwanted noise. The Sport Set includes a PT470 body-pack transmitter in a compact and rugged housing. The package also enclose a C544 L condenser head-worn microphone featuring a cardioid polar pattern and an external shock mount for high mechanical-noise rejection. Its moisture shield ensures a high degree of humidity protection for the microphone.
The WMS470 Sports Set package includes:
1 x SR470 Receiver
1 x PT470 Body-pack transmitter
1 x C544 L Head-worn microphone
1 x Rack mount kit, 1 x Universal power supply with US/UK/EU adapter, 1 x AA size battery, 2 x Antennas, 1 x Belt clip
|
Set composed of:
- 1 x LDWIN42R2
- 2 x LDWIN42BP
- 2 x LDWS100GC
Due to the changed situation in the area of general frequency allocations for the operation of wireless systems starting in 2015, LD Systems decided to develop the even more flexible and highly professional WIN 42 wireless system.
With its outstanding audio quality, the LD Systems WIN 42 UHF system offers numerous potential applications for live performances and permanent installations. The working UHF frequency range is 734 MHz to 776 MHz. Both the handheld microphone and belt pack transmitter versions provide any vocalist, speaker or instrumentalist optimal transmission of his or her performance with the greatest possible freedom of movement. By means of a threaded connection, the microphone head of the handheld transmitter can be swapped quickly and easily (dynamic and condenser capsules).
The system has more than 1680 freely selectable frequencies and thus makes it possible to operate up to 20 systems simultaneously. The "channel scan" function assists you in finding and tuning to a transmission frequency without interference. This frequency is then transmitted simply and conveniently from receiver to transmitter via an infrared link. The transmitting power is adjustable in 3 stages (10, 30, 50 mW) directly on the microphone, permitting adaptation to any environment.
The half-rack True Diversity receiver houses numerous system features, for example, a transmitter battery status indicator on the receiver display, an indicator for the (transmitter) "Mute On/Off" function on the receiver display, 4 EQ presets that are switchable at the receiver, and much more. A highly professional system embodying the outstanding value-for-money that is so typical for LD Systems.
- UHF frequency range 734 - 776 MHz
- 1680 frequencies
- 20 groups with 577 fixed frequencies
- user bank with 1680 freely selectable frequencies in 25 kHz increments
- 255 addresses selectable
- channel scan
- true diversity receiver
- interchangeable microphone capsules (dynamic / condenser)
Receiver display
- volume
- radio frequency level antenna A/B
- audio level
- battery status of transmitter
- transmitter sync via infrared
- squelch setting in menu
- equalizer setting in menu
- naming template in menu
- 10 sets storable
- lockable menu
- balanced XLR output, unbalanced 6.3 mm jack
- adjustable output
- adjustable headphone output
Transmitter Display - battery status
- RF power
- AF power
- additional system information
Technical Specifications WIN42 Receiver - Model Name: LDWIN42R
- Channels: 1680 (20 groups + 1 user group)
- Frequency range: 734 - 776 MHz
- Audio Frequency response: 60 Hz - 16 kHz
- THD:
- Signal/Noise ratio: >100 dB
- Audio Output: XLR balanced / 6,3 mm Jack unbalanced
- Power Supply: external power adapter 13,5 V DC, 500 mA
- Dimensions (W x H x D): 212 x 44 x 184 mm
Technical Specifications Handheld Transmitter - Model Name: LDWIN42MD
- Channels: 1680
- Frequency range: 734 - 776 MHz
- Audio Frequency response: 60 Hz - 16 kHz
- RF output power: adjustable 10 mw / 30 mw / 50 mw
- Power requirement: 2 x AA size batteries
- Operating time: >13 h with alkaline batteries
- Dimensions (L x Ø): 255 x 52 mm
Technical Specifications Beltpack Transmitter - Model Name: LDWIN42BP
- Channels: 1680
- Frequency range: 734 - 776 MHz
- Audio Frequency response: 60 Hz - 16 kHz
- RF output power: adjustable 10 mw / 30 mw / 50 mw
- Input Connector: mini XLR 3-pole (phantom power for headset)
- Power requirement: 2 x AA size batteries
- Operating time: >14 h with alkaline batteries
- Dimensions (W x H x D): 87 x 25 x 63 mm
|
Reviews
There are no reviews yet.