Content |
The cardioid e 935 is a fully professional vocal microphone,
developed to cut through high on-stage levels.
Features
Rugged metal body
Advanced shock-mount design
Consistent on-/off-axis response
Hum compensating coil
Made in Germany
Delivery includes a pouch and a microphone clamp
Delivery Includes
1 e 935
MZQ 800 microphone clamp
Pouch
Technical Data
Pick-up pattern Cardioid
Frequency response (microphone) 40.....18000 Hz
Sensitivity in free field, no load (1kHz)
2,8mV/Pa bei 1 kHz = -51dB (0 dB = 1V/Pa) = -71 dB (0 dB = 1V/ubar)
Nominal impedance 350 Ohm
Min. terminating impedance 1000 Ohm
Dimensions 47 x 181 mm
Weight 330 g
|
Transducer Type: Dynamic
Polar Pattern: Hypercardioid
Microphone Frequency Response: 30 - 20.000 Hz
Connection Type: XLR 3-pin
Made in Germany
Like all members of the M series, the M 88 TG is handcrafted in Germany. The materials and the precise craftsmanship that go into the microphone ultimately create a world-class product, a level of quality that turns an ordinary microphone purchase into a long-term investment.
Perfect for heavy bass Sources
The M 88 TG excels on the kick drum, saxophone and percussions, the result of a balanced sound profile and deep bass tones. It is a must-have for every microphone collection. And why shouldn’t it be when you consider its features? It is both insensitive to high sound pressure levels and feedback resistant thanks to its nearly perfect hypercardioid!
Flexible tool iN The studio
The M 88 TG excels in the studio with the help of its multifaceted flexibility. No matter whether the job involves vocals, horns, guitar amplifiers or drums – the microphone is the perfect choice for the widest range of sources. It is all the result of its exceptionally broad frequency response and rich sound.
|
The E-845S is a high-performance super-cardioid lead vocal microphone with an extended high-frequency response, specially designed for stage use.
Frequency Response : 40.....16000 Hz
Sensitivity in free field, no load : (1kHz) 1,8 mV/Pa
Min. terminating impedance : 1000 Ohm
Dimensions : d 46 x 185 mm
Weight : w/o cable 330 g
|
In the tradition of the SM58?, the Beta 58A dynamic microphone has become a top choice among vocalists and touring sound professionals.
The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain-before-feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille. Typical applications for the Beta 58A include lead vocals, backup vocals and speech.
- Smooth, extended frequency response for outstanding sound for professional live vocal use
- Consistent supercardioid pattern provides the best gain-before-feedback among dynamic microphones
- Pneumatic shock mount reduces handling noise
- Frequency response: 50 to 16,000 Hz
-
Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
-
Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound
-
Neodymium magnet for high signal–to–noise output
-
Hardened steel mesh grille that resists wear and abuse
-
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
-
Minimally effected by varying load impedance
-
Legendary Shure quality and reliability
Transducer |
(Moving Coil, with Neodymium Magnet) Dynamic |
Polar Pattern |
Supercardioid |
Frequency Response |
50 Hz - 16 kHz |
Maximum Input Sound Level |
not specified by manufacturer |
Power Requirements |
None Dynamic, Requires No Phantom or Battery Power |
Output Impedance |
150 Ohms (290 Ohms Actual) |
Output Connectors |
XLR-3 Type |
Dimensions |
6.375 x 2" (162 x 51mm) LxDiameter |
Weight |
9.92 oz. (278 g) |
|
The MD 441 U is a microphone of exceptional quality: its acoustic properties come as close as possible to those of a condenser microphone. Accurate signal response and low distortion are ensured, even with the highest sound pressure levels. Surface:
all metal body with black leatherette finish, sound inlet basket: nickel plated.
Pick-up pattern : super-cardioid
Sensitivity in free field, no load : (1kHz) 1,8 mV/Pa +- 2 dB
Nominal impedance : 200 Ohm
Min. terminating impedance : 1000 Ohm
Dimensions : 270 x 33 x 36 mm
Weight : 450 g
| The Beta 87A has consistently been a top choice of performers and audio technicians around the world due to its superb accuracy and detail, and rich vocal production. This long-standing favorite now incorporates a cardioid polar pattern and has been named the Beta 87C TM.
Developed in response to professional demands associated with the use of personal monitoring devices like the Shure PSM ? Series, Shure's new Beta 87C premium vocal microphone delivers studio-grade performance and a smooth, extended high-end frequency response in a cardioid condenser design.
The uniform cardioid polar pattern of the Beta 87C enables users to effectively reject ambient noise arriving at the rear of the microphone, an attribute that will be especially appealing to users of personal monitors and others who frequently experience undesirable sounds bleeding into their mixes.
Other features include:
- Smooth, wide frequency response with slight presence rise
- Uniform cardioid polar pattern for maximum isolation
- Minimal off-axis tone coloration
- Low-frequency roll-off compensates for proximity effect
- Three-stage pop filter minimizes breath pop and noise
- Break-resistant stand adapter
- Frequency response: 50 to 20,000 Hz
|
Reviews
There are no reviews yet.