SENNHEISER E-945 SUPERCARDIOID DYNAMIC MICROPHONE

189.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The e 945 is a fully professional super-cardioid vocal microphone which cuts through the mix and offers a smooth, natural sound. Its warm tonal response is matched with rugged construction and excellent feedback rejection. Features Rugged metal body Advanced shock-mount design Consistent on-/off-axis response Hum compensating coil Made in Germany Delivery includes a pouch and […]

 

Read more

The e 945 is a fully professional super-cardioid vocal microphone which cuts
through the mix and offers a smooth, natural sound. Its warm tonal response
is matched with rugged construction and excellent feedback rejection.

Features
Rugged metal body
Advanced shock-mount design
Consistent on-/off-axis response
Hum compensating coil
Made in Germany
Delivery includes a pouch and a microphone clamp
Delivery Includes
1 e 945
MZQ 800 microphone clamp
Pouch

Technical Data
Pick-up pattern  Super-cardioid
Frequency response (microphone)  40…..18000Hz
Sensitivity in free field, no load (1kHz)
2,0mV/Pa bei 1 kHz = -54dB (0 dB = 1V/Pa) = -74 dB (0 dB = 1V/ubar)
Nominal impedance  350 Ohm
Min. terminating impedance  1000 Ohm
Dimensions  47 x 186 mm
Weight  330 g

Weight 0.33 kg

Reviews

There are no reviews yet.

Be the first to review “SENNHEISER E-945 SUPERCARDIOID DYNAMIC MICROPHONE”

Your email address will not be published. Required fields are marked *

Quick Comparison

SENNHEISER E-945 SUPERCARDIOID DYNAMIC MICROPHONE removeAKG SE300B - Preamp unit removeSENNHEISER ME-62 OMNI-DIRECTIONAL MIC CAPSULE for K6 and K6P POW removeSENNHEISER ME-65 Electret Microphone removeAKG CK 33 - Cardioid Condenser Microphone removeAKG C 411PP Vibration Pickup Condenser microphone for string instruments remove
NameSENNHEISER E-945 SUPERCARDIOID DYNAMIC MICROPHONE removeAKG SE300B - Preamp unit removeSENNHEISER ME-62 OMNI-DIRECTIONAL MIC CAPSULE for K6 and K6P POW removeSENNHEISER ME-65 Electret Microphone removeAKG CK 33 - Cardioid Condenser Microphone removeAKG C 411PP Vibration Pickup Condenser microphone for string instruments remove
Image
SKUH10SE00089SE 300BH10SE00009H10SE00038CK 33C 411PP
Rating
Price 189.00 incl. GR VAT 178.00 incl. GR VAT 150.00 incl. GR VAT 119.00 incl. GR VAT 164.00 incl. GR VAT 164.00 incl. GR VAT
Stock

In stock

Available on backorder

In stock

In stock

Available on backorder

In stock

AvailabilityIn stockAvailable on backorderIn stockIn stockAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe e 945 is a fully professional super-cardioid vocal microphone which cuts through the mix and offers a smooth, natural sound. Its warm tonal response is matched with rugged construction and excellent feedback rejection. Features Rugged metal body Advanced shock-mount design Consistent on-/off-axis response Hum compensating coil Made in Germany Delivery includes a pouch and a microphone clamp Delivery Includes 1 e 945 MZQ 800 microphone clamp Pouch Technical Data Pick-up pattern  Super-cardioid Frequency response (microphone)  40.....18000Hz Sensitivity in free field, no load (1kHz) 2,0mV/Pa bei 1 kHz = -54dB (0 dB = 1V/Pa) = -74 dB (0 dB = 1V/ubar) Nominal impedance  350 Ohm Min. terminating impedance  1000 Ohm Dimensions  47 x 186 mm Weight  330 g

Transformerless Power/Output Module ? The SE 300 B is used with all AKG Blue Line capsules and operates from 9 ? 52 V phantom power. The 3-position switch allows selection of linear response, -10 dB preattenuation and 12-dB-per-octave 75 Hz low-cut filter. A stand adapter is included.

Specifications

Polar pattern: hypercardioid/directional
Frequency range: 20?20,000 Hz
Sensitivity: 25 mV/Pa (-32 dBV)
Max. SPL for 1 % THD: 124/134 dB
Equivalent noise level: 17 dB-A
Signal/noise ratio (A weighted): 77 dB
Preattenuation pad: -10 dB, switchable Bass cut filter: 12 dB/octave at 75 Hz
Electrical impedance: 200 Ohms
Recommended load impedance: >1,000 Ohms
Power requirement: 9 to 52 V phantom power to DIN 45 596
Current consumption:

The ME 62 is an omni-directional microphone head suitable for K6 and K6P
powering modules. It can be used for reporting, discussions and interviews.
The ME 62 is particularly suitable for good reproduction of 'room' ambience
and 'spaced omni' stereo recording. Matt black, anodised, scratch-resistant finish.

Features
Omni-directional pick-up pattern
Minimal inherent self-noise
Excellent rejection of rumble, wind and handling noise
Wide frequency response
High maximum sound pressure level
Integral pop filter
Delivery Includes
1 ME 62

Technical Data
Pick-up pattern  omni 
Sensitivity in free field, no load (1kHz)  31 mV/Pa +- 2,5 dB 
Nominal impedance  200 Ohm (K6) 
Min. terminating impedance  1000 Ohm (K6) 
Equivalent noise level  15 dB 
Equivalent noise level weighted as per CCIR 468-3  27 dB 
Dimensions  d 22,5 x 94 mm 
Weight  30 g 

The ME 65 is a super-cardioid microphone head designed for use with the K6 and K6P powering modules. It is especially suited to vocal and speech applications. Matt black, anodised, scratch-resistant finish.

 

  • Pick-up pattern : super-cardioid
  • Sensitivity in free field, no load (1kHz) : 10 mV/Pa +- 2,5 dB
  • Nominal impedance : 200 Ohm (K6)
  • Min. terminating impedance : 1000 Ohm (K6)
  • Equivalent noise level : 20 dB
  • Dimensions : d 44 x 131 mm
  • Weight :

Technical specifications

Polar pattern

hypercardioid

Frequency range

50 to 20,000 Hz

Sensitivity

20 mV/Pa (?34 dBV)

Max. SPL

125 dB (k=1 %)

Equivalent noise level

21 dB-A

Signal/noise ratio (A-weighted)

73 dB

Impedance

600 ohms

Recommended load impedance

>2000 ohms

Supply voltage

9 to 52 V phantom power, requires DPA adapter (supplied with most Installation Modules)

Current consumption

Connector

Discreet Acoustics Modular standard

Finish

matte dark gray

Dimensions

13.5 x 20 mm dia. (0.5 dia. x 0.8 in.)

Net weight

5 g (0.17 oz.)

Shipping weight

88 g (3.1 oz.)

Accessories (included)

W 30

  Weighing only 18 grams (0.6 oz.), this ultra-light condenser pickup is ideal for acoustic guitar, mandolin, violin, and most other stringed instruments. The C 411 will give a clear and uncolored sound without changing the balance of the instrument. Attaching the C 411 on or near the bridge or anywhere else on the instrument is easy with the included non-marring, reusable, solventfree adhesive compound. C 411 PP: For hardwire applications, with standard XLR connector for phantom powering.
Weight0.33 kg0.50 kg0.30 kg0.80 kg0.30 kg0.15 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.33 kg
Weight 0.50 kg
Weight 0.30 kg
Weight 0.80 kg
Weight 0.30 kg
Weight 0.15 kg